• Title/Summary/Keyword: Degree of Influence

Search Result 2,580, Processing Time 0.032 seconds

Influence of the Supercooling Degree and Cooling Rate on a Continuous Ice Formation by a Supercooled Aqueous Solution in Flow Using a Plate Heat Exchanger (판형 열교환기를 이용한 과냉각수용액에서 유동과냉도 및 냉각속도가 연속제빙에 미치는 영향)

  • Lee, Dong-Gyu;Peck, Jong-Hyeon;Hong, Hi-Ki;Kang, Chae-Dong
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.19 no.9
    • /
    • pp.647-653
    • /
    • 2007
  • In dynamic ice storage system(DISS), ice slurry is formed not only from solution freezing by mechanical removing parts but also supercooled solution. However, in order to perform continuous ice formation in the system without mechanical moving parts, supercooled aqueous solution should be formed stable through cooling heat exchanger and be dissolved uniformly in storage tank. In previous study, the time of ice slurry increased as the pressure of the cooling heat exchanger(PHX) increased. In this study, a cooling experiment of an ethylene glycol 7mass% solution was performed with various inlet temperature of the PHX, which has constant brine inlet temperature of $-7^{\circ}C$. The temperature in the storage tank maintained to freezing point of the solution. At results, the time of ice slurry formation increased as the supercooling degree decreased and the cooling rate increased.

Influence of Various Powder of OPC Received in Concrete Plant on Strength Characteristics of Cured Mortar (레미콘 공장에 입고되는 OPC의 다양한 분말도 변화가 경화 모르타르의 강도 특성에 미치는 영향)

  • Lee, Jae-Jin;Kim, Min-Sang;Hyun, Seong-Yong;Kim, Yeong-Tae;Han, Min-Cheol;Han, Cheon-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2017.11a
    • /
    • pp.115-116
    • /
    • 2017
  • According to the experimental results of researchers recently seen, there is a case where a significant difference between data of several reports and measured powder is detected, and concrete examination on this is necessary. In this study, we compare the actual powdered degree of powdered aid on the report against 20 OPCs that are actually being brought into the raw concrete plant, and the OPC powder also influences the difference of OPC powder's strength characteristics on hardened mortar Was analyzed. As a result of the analysis, doubts were raised on the reliability of the OPC powder degree described on the certificate, and the bending and compressive strength tended to increase as the degree of fineness of the measured OPC increased.

  • PDF

Defining Rail Transit Level of Service and Analysis of it's Affection According to Rapid Transit Railway(KTX) (고속철도(KTX) 수요에 따른 dwelling time예측 모형개발)

  • Suh, Sun-Duck;Shin, Young-Ho;Shim, Hyun-Jin;Kim, Hwan-Su
    • Proceedings of the KSR Conference
    • /
    • 2008.06a
    • /
    • pp.1612-1627
    • /
    • 2008
  • Dwelling time is one of the factors that influence in rail. Current research in dwelling time has been focusing on railways, the state of the research in high-speed rail's dwelling time is not complete. Dwelling time is consisted of time to open door, time to get into and out of vehicle and time of the departure it takes after the passenger's door was closed, it was affected by various factors such as congestion's degree in vehicle, the number of persons that get into and out of vehicle, congestion's degree in station. In order to analyze theses, we need data analysis such as the number of persons that get into and out of vehicle, congestion's degree in station, congestion's degree in vehicle, but the congestion's degree and passenger's distribution chart in vehicle is excluded in this research due to difficulty of gathering data, and thus we will develop forecasting models through high-speed rail's demand most affected by the dwelling time.

  • PDF

Identification of Flexion Withdrawal Reflex Using Linear Model in Spinal Cord Injury

  • Kim Yong-Chul;Youm Youn-Gil
    • Journal of Mechanical Science and Technology
    • /
    • v.20 no.8
    • /
    • pp.1183-1194
    • /
    • 2006
  • The aim of this study was to identify the characteristics of the flexion withdrawal reflex modulated by the hip angle and hip movement in spinal cord injury (SCI). The influence of the hip position and passive movement were tested in 6 subjects with chronic SCI. Each subject placed in a supine position and lower leg was fixed with the knee at 5 -45 degree flexion and the ankle at 25-40 degree plantar flexion. A train of 10 stimulus pulses were applied at 200 Hz to the skin of the medial arch to trigger flexion reflexes. From results of the regression analysis, static properties of normalized muscle activation of flexor muscles have the linear relationship with respect to hip angle (P< 0.05). In order to verify the neural contribution of flexion reflex, we compared the static and dynamic gains of estimated muscle activations with measured EMG of ankle flexor muscle. Form this study, we postulate that the torque and muscle response of flexion withdrawal reflex have linear relationship with hip angle and angular velocity.

Influence of Thermal Aging in Change of Crosslink Density and Deformation of Natural Rubber Vulcanizates

  • Choe, Seong Sin
    • Bulletin of the Korean Chemical Society
    • /
    • v.21 no.6
    • /
    • pp.628-634
    • /
    • 2000
  • Crosslink is the most important chemistry in a rubber vulcanizate. Degree and type of crosslinks of the vulcanizate determine its physical properties. Change of crosslink density and deformation of a rubber vulcanizate by thermal aging were studied using natural rubber (NR) vulcanizates with various cure systems (conventional, semi-EV, and EV) and different cure times (under-, optimum-, and overture). All the NR vulcanizates were deformed by the thermal aging at 60-100 $^{\circ}C.$ The higher the aging temperature is, the more degree of the deformation is. The undercured NR vulcanizates after the thermal aging were deformed more than the optimumand overcured ones. The NR vulcanizates with the EV cure system were less deformed than those with the conventional and semi-EV cure systems. The deformation of the NR vulcanizates was found to be due to change of the crosslink density of the vulcanizates. The crosslink densities of all the vulcanizates after the extraction of organic materials were also changed by the thermal ging. The sources to change the crosslink densities of the vulcanizates by the thermal aging were found to be dissociation of the existing sulfur crosslink and the formation of new crosslinks by free sulfur, reaction products of curing agents, and pendent sulfide groups.

Factors Influencing Internet Addiction and Information Ethics : Centering on Self Characteristics and Cognitive Characteristics toward Internet (인터넷 중독과 정보윤리에 영향을 미치는 요인에 관한 연구 - 자아특성 및 인터넷 인지특성을 중심으로)

  • Goo Bon-Hee;Choi Moo-Jin
    • The Journal of Information Systems
    • /
    • v.15 no.3
    • /
    • pp.233-252
    • /
    • 2006
  • Recently, negative sides of internet, internet and/or game addiction and unethical behavior over internet, have been largely publicized in our society. There have been numerous studies to explore the problems and solutions, but these lack considering broader set of research variables. Therefore, this research investigated how i) internet users' self characteristics and ii) cognitive characteristics toward internet influence iii) internet addiction and iv) information ethics respectively. Especially, this study focused on college students, more mature beings than elementary, middle and high school students with whom most other researches have dealt so far. Major findings of this study are as follows: (1) Willingness to develop relationships over internet, usefulness of internet use, a degree to perceive the cyber space as real, and a degree to express self over internet have significant effects on disabled life style. Self respect willingness to develop relationships over internet, usefulness of internet use, a degree to perceive the cyber space as real, and capability of using internet have significant effects on the lack of control over internet. Willingness to develop relationships over internet, self control, and a degree to express self over internet have significant effects on the lack of control over internet. 2) Regarding the effects of independent variables(self characteristics and cognitive characteristics) on information ethics through internet addiction factors, self respect self control, a degree to perceive the cyber space as real, and capability of using internet have directly and indirectly significant effects on information ethics through internet addiction. Then we suggested four approaches to reduce the internet addiction and improve the information ethics based on the findings.

  • PDF

Influences for the understanding of General Chemistry according to the completion of chemical subjects in high school

  • Koo, Min Ju;Park, Jong Keun
    • International Journal of Advanced Culture Technology
    • /
    • v.9 no.4
    • /
    • pp.237-247
    • /
    • 2021
  • The purpose of this study is to investigate the influences on the understanding and academic achievement in general chemistry according to chemical grades in high school and College Scholatic Ability Test. We investigated the difference between the completed subjects in high school and the elective subjects in the Test, degree of understanding of the general chemistry according to the subjects completed in high school, and the effects on the academic achievement of general chemistry by dint of the chemical grades in high school and the Test, etc. By the results of the student's perception survey, most of the students choose Chemistry I at the Test. It was found that the understanding of general chemistry was greatly affected by the chemical elective subjects of high school. Chemical grades in high school and the Test were found to have a significant influence on academic achievement of general chemistry.

The Effect of Social Capital on Personal Happiness: A Focus on Service Inderstry Employees

  • JUNG, Myung-Hee
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.7 no.1
    • /
    • pp.291-299
    • /
    • 2020
  • The purpose of this study focuses on finding the influences of social capital on personal happiness by studying service industry employees. This current study utilized a questionnaire survey method which was used to collect the analysis data, from July 20 to August 10 in 2019. 281 questionnaires were gathered in Korea and the statistical analysis was conducted. This study recognized social capital as 3 independent variables and personal happiness as a dependent variable. Social capital is composed of the social network, social trust and social norms. First, the social network consisted of the satisfaction degree in one's social relations and the social interaction degree. Second, social trust is composed of the trust degree with ones neighbors in the same local area. Last, social norms are consisted of reciprocity, participation and a sense of belonging one feels in the same society. The findings of this study were as follows: first, it was found that social network, social trust, and social norms made affirmative influences on personal happiness of the employees. Second, the social network and social norms made statistically significant influences with personal happiness, but social trust was shown to not have similar influence.

The Influence of Cooling Rates on the CFR and the MDE of Al-Si Alloys. (Al-Si합금(合金)의 CFR 과 MDE 에 미치는 냉각속도(冷却速度)의 영향(影響))

  • Kwon, Hyuk-Moo;Kim, Soo-Young
    • Journal of Korea Foundry Society
    • /
    • v.4 no.4
    • /
    • pp.14-19
    • /
    • 1984
  • In order to clarify the solidification mechanism of Al-Si alloy, Mushy Degree of Eutectic Solidification (MDE) and Centerline Feeding Resistance (CFR) were systematically studied by casting with various compositions of $Al-(6{\sim}18%)$ Si alloys into several kinds of molds having different cooling rates. The results are as follows: 1. CFR% increases slightly as solute concentration increases, but decreases remarkably as the cooling rate of the mold increases, that is, the composition dependence of the alloys has more effect on the change of CFR% than that of the mold cooling rate. 2. The composition dependence of MDE value has the same tendency as that of Degree of Eutectic Solidification (DES). MDE value within the range of hypereutectic composition is larger than that of hypoeutectic and it represents the maximum value at eutectic composition. The higher the cooling rate is, the less the MDE value is.

  • PDF

A Study on Stress, /Normative Conformity toward Clothing, and Clothing Satisfaction of High School Students (고등학생의 스트레스와 의복의 규범적 동조 및 의복만족도에 관한 연구)

  • 이명희;이은실
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.24 no.2
    • /
    • pp.245-256
    • /
    • 2000
  • The purpose of this study was to examine the influence of stress, body satisfaction, academic record, and demographic variables on the normative conformity toward clothing and clothing satisfaction of high school students. The subjects were 389 high school students(boys: 169, girls: 220) in Seoul, Korea. The normative conformity toward clothing measured by the degree of wearing of unsuitable clothes for school clothing and private clothing norm of students. The school clothing was influenced by allowance, gender, stress of home life, academic record(-), mother's education(R2=.270). The private clothes was influenced by allowance, gender, stress of home life, body satisfaction, and geographical region(R2=.200). The clothing satisfaction was influenced by body satisfaction, gender, allowance, geographical region, and stress of home life(-)(R2=.325). The present findings provide that stress of home life, gender, and allowance had effect on the normative conformity toward clothing, and the higher the stress of home life, the lower the degree of clothing satisfaction.

  • PDF