• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.8
• /
• pp.771-779
• /
• 2001

In this study, a simulation program has been developed to predict the performance of a parallel flow condenser of an air conditioning system for an automobile. The well-known correlations for he heat transfer rates and the pressure drops are included in this model. It is fond that the numerical model can predict the heat transfer rate and the pressure drop accurately. As the condensing pressure increases of fixed air inlet temperature, the heat transfer rate increases and the pressure drop decreases. The effect of he degree of subcooling on the performance of the condenser is greater than that of the degree of super-heating because the ratio of the area occupied by he tow-phase refrigerant the total area is significantly affected by he degree of subcooling rather than the degree of superheating.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.55-63
• /
• 2006

The purpose of this study examines difference of cunsumer satisfaction by expected selection attribute of wedding dress and bride make-up. It is looking into influencing variables in consumer satisfaction, and is supplying real information to wedding market. The subjects of this study were 241 women getting married within one year of Daegu. The data were analyzed by using frequency, mean, the standard deviation, ANOVA, duncan test, correlation analysis, cross-analysis. Conclusion obtained from the results and discussions of the research are as follows: 1) In the attribution of expected selection according to occupation, blue-collar women are concerned about cost factor but they are low content with the perceptual satisfaction factor. 2) When selecting places for wedding dresses and wedding make-up, in the attribute of expected selection about the number of visiting the shop for wedding dresses and make-up, people who visit over 7 dress shops are highly interested in the appearance fancy degree, advertisements effect factors. But they are concerned with advertisements effect factor, cost factor in the perceptual satisfaction factor about wedding dress. Besides, the more they get chances to visit many dress shops, they are concerned with advertisements, cost factors, and satisfied with both the effect of advertisements and appearance factor degree in the attribution of expected selection about wedding make-up. 3) In the attribution of expected selection about the cost of wedding dresses and make-up, the lower the cost paid, people are interested in price factor. Furthermore, in the attribution of expected selection about the wedding dress and make-up cost, those who spent over 150 million Won are interested in quality, others influence factor, and the case of less than 120~150 million Won, people are highly interested in the appearance fancy degree, advertisements effect factor, and the women are satisfied with the advertisement effect factor in the perceptual satisfaction factor of wedding make-up.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.51-58
• /
• 2006

In rapid prototyping, the optimal part orientation during fabrication is critical as it can improve part accuracy, minimize the requirement for supports and reduce the production time. Through investigating the geometric issues of STL model and process planning of RPM, This paper establishes optimizing model based on the considerations of staircase effect, support area and production time. The general satisfactory degree function is constructed employing the multi-objective optimization theory based on the general satisfactory degree principle. The best part-building orientation is obtained by solving the function employing generic algorithm. Experiment shows that the methods can effective resolve the part-building orientation in RP.

• Journal of dental hygiene science
• /
• v.22 no.4
• /
• pp.199-205
• /
• 2022

Background: The use of dental floss is associated with a reduction in dental caries and periodontal disease. According to personal preference, not only thread type but also C type and Y type floss are used. Although the effectiveness of dental floss for removing dental plaque has been proven, plaque removal effect of C type and Y type floss has not been well reported. In this study, the plaque removal effect of C type and Y type floss compared to thread type floss was experimentally verified. Methods: Thread type, C type and Y type floss were used to remove dental plaque. Ten people in each flossing group participated, and by applying dental floss to the 6 incisors of the maxilla and mandible, the degree of dental plaque was analyzed by QLF-D. To evaluate the removal degree of dental plaque before and after flossing, Simple Plaque Score (SPS), Area R30, Area R70, and Area R120 score were measured. Results: In the analysis using the Area R30 fluorescence score of the QLF-D system, the degree of plaque removal according to the application of dental floss was effective in all the thread type (p=0.018), C-type (p=0.012), and Y-type (p=0.012) floss groups compared to before the application of the floss. Among them, C type floss was more effective in removing plaque than thread type and Y type floss. However, the plaque removal effect between the three floss types was not significantly different in ∆SPS (p=0.674), ∆Area R30 (p=0.726), ∆Area R70 (p=0.504), and ∆Area R120 scores (p=0.423). Conclusion: Thread type, C type, and Y type floss were all effective in removing dental plaque, but there was no significant difference in dental plaque removal effect according to the type of floss.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.73-79
• /
• 2011

In this paper, cycle performance analysis of cascade refrigeration system using alternative FREON refrigerants are presented to offer the basic design data for the operating parameters of the system. The operating parameters considered in this study include subcooled and superheated degree, and evaporating and condensing temperature, temperature difference of cascade heat exchanger in cascade refrigeration system. The COP of cascade refrigeration system increases with the increasing subcooled degree, but there is no significant changes with the increasing superheated degree. The COP of cascade refrigeration system depends on evaporating and condensing temperatures of cascade heat exchanger. Therefore, subcooled degree, evaporating and condensing temperature of cascade heat exchanger using alternative FREON refrigerants have an effect on the COP of this system. In this paper, COP of cascade refrigeration system using R23 for low temperature system and R507A for high temperature system is higher 8 ~ 29 % than using R13 for low temperature system and R22 for high temperature system.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.13 no.3
• /
• pp.359-367
• /
• 2006

Purpose: This study was a within subject repeated pretest-posttest design done to compare the effect of disinfection and the degree of MRSA(Methicillin- resistant staphylococcus aureus) isolation from hand disinfectant in ICU nurses. Method: Out of the total internal medicine/surgery ICU nurses at a university hospital in Seoul, 29 female nurses who were participating in direct patient care were participants in this study. After collection of samples, Staphylococcus aureus and MRSA were isolated from the palms, nails and nasal cavities of the nurses according to disinfectants (soap and beta-scrub). Results: The effect of disinfection was greater in the beta-scrub group than in the soap group, and the effect of disinfection on palms was higher in the beta-scrub group than in the soap group. As for the degree of MRSA isolation, there was more isolation in palms in the soap group than in the beta-scrub group but there was no difference in the degree of MRSA isolation from the hand disinfectant in nails and nasal cavities. Conclusion: Beta-scrub showed a superior prolonged effect against transient bacteria compared with soap. Further, to reduce MRSA infection, we recommend interventions focused on these aspects.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.377-378
• /
• 2002

In many dynamic systems, unwanted vibrations which may arise during operation of machines are costly in terms of reduction of performance and service life. Sometimes these risky oscillations endanger equipment and personnel. When hydraulic telescopic booms taken large mass are driven at slow speeds between the two pads, unstable oscillations occur through the stick-slip at the sliding parts and become more severe and saw-toothed. This paper supposes few models for the telescopic boom in the multi-degree of freedom system, and attempts a theoretical approach for the numerical analysis in its stick-slip condition, It was verified that this theoretical approach has an effect on estimate of stick-slip in the one-degree as well as multi-degree of freedom system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.2
• /
• pp.37-44
• /
• 2008

A theoretical equation was proposed to consider the effect of ponding for the excess pore water pressure in agricultural reservoir on soft clay ground. The value of excess pore water pressure predicted using the proposed equation was compared to those predicted with the Terzaghi's method and the finite difference method(FDM), respectively, for the purpose of verification. The degree of consolidation according to ponding predicted by applying the proposed equation was close to the observed degree of consolidation on the double drainage condition(at DP-3) but it was less than the observed degree of consolidation on the single drainage condition(at DP-5). The equation was very applicable to practice because the analysis result by the equation was close to the observed data.

• Journal of Korean Library and Information Science Society
• /
• v.38 no.2
• /
• pp.101-124
• /
• 2007

The purpose of the study is to see how the bibliotherapy program has an effect on the improvement of a junior high school student's career maturity degree, and how it can be applied to students for developmental and collective approach. In this experiment, bibliotherapy program was progressed 11 times for 60 minutes to twenty second grade students of W junior high school in Kyeonggi-Do. There are two groups: one is the control group, and the other experiment group. In order to verify the effect of a bibliotherapy program a correspondence specimen t-test analysis was used. The degree of youth's course maturity has been checked to see if there is any difference between the preliminary inspection and the post inspection for both the experiment group and the control group. Moreover, ANCOVA was applied in order to grasp if there is any difference between the experiment group and the control group to the post mark.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1212-1221
• /
• 2010

A theoretical equation was proposed to consider the effect of fill and ponding for the excess pore water pressure in agricultural reservoir on soft clay ground. For the purpose of verification of the proposed equation, laboratory model tests and field tests were performed and excess pore water pressure was compared to those predicted with the Terzaghi's method. The degree of consolidation according to ponding predicted by applying the proposed equation was close to the observed degree of consolidation on the double drainage condition(at DP-3) but it was less than the observed degree of consolidation on the single drainage condition(at DP-5). The predicted excess pore water pressure according to fill and ponding was very applicable to practice because it was close to the observed data.