• 제목/요약/키워드: Degree condition

검색결과 2,426건 처리시간 0.029초

갑각류 외피의 유효이용을 위한 Chitin 및 Chitosan의 제조와 물성학적 특성에 관한 연구 -1. Chitosan의 분자량과 탈아세틸화도에 미치는 제조조건의 영향- (Preparation and Rheological Properties of Chitin and Chitosan -1. Effect of preparation condition on the degree of deacetylation and the molecular weight of chitosan-)

  • 이근태;박성민;백운두
    • 한국수산과학회지
    • /
    • 제28권4호
    • /
    • pp.392-396
    • /
    • 1995
  • Chitosan의 탈아세틸화도와 분자량에 미치는 chitosan 제조조건의 영향을 조사한 결과는 다음과 같다. 탈아세틸화 과정에서 NaOH 농도가 높을수록 탈아세틸화는 많이 일어났으나 $40\%$ 이상의 농도에서는 농도가 증가할수록 탈아세틸화의 증가폭은 감소하고, 분자량의 감소폭은 줄어들지 않았다. 가열온도를 $130^{\circ}C$ 에서 $150^{\circ}C$로 증가시켰을 때 탈아세틸화도는 $84\%$에서 $87\%$$3\%$ 정도 증가한 반면 분자량은 267,000에서 85,800로 $90^{\circ}C$에서 $130^{\circ}C$로 증가하였을 때의 분자량 감소폭보다 크게 나타났다. 그리고 3시간 이상 연속 알칼리처리하여도 $86\%$ 이상의 탈아세틸화도를 얻지 못하였지만 간헐적으로 수세하여 처리한 경우 3회 처리하였을 때 $93\%$의 탈아세틸화가 일어났다. 연속으로 3시간 처리했을 경우 탈아세틸화도는 $84\%$이었고, 분자량은 267,000이었으나 간헐반복처리로 3시간처리 했을 때는 탈아세틸화도가 $93\%$, 분자량은 280,000으로 연속처리 한 경우보다 더 높았다.

  • PDF

벼 품종의 잎집무늬마름병 저항성 연구 II. 품종간 저항성의 차이 (Studies on Varietal Resistance to Sheath Blight Disease in Rice II. Varietal Difference of Resistance)

  • 김광호;양계진;이상복
    • 한국작물학회지
    • /
    • 제32권3호
    • /
    • pp.302-309
    • /
    • 1987
  • 벼 품종의 잎집무늬마름병에 대한 저항성 정도를 성묘기에 검정하여 이 병에 대한 저항성원을 선발할 목적으로 1984년 30품종, '85년 40품종, 그리고 '86년에 100품종을 공시, 보통기에 다비, 밀식재배하여 병원구을 접종하였다. 1984년에는 2개의 균주를 접종하였으며 '85년에는 만기재배하에서의 검정을 별도로 수행하였기 때문에 3년간에 걸친 보통기 재배하에서의 검정을 합하여 총 5회의 실험이 이루어 졌다. 공시한 각 품종의 출수 25일 후에 조사한 피해도를 기준으로 하여 품종간 저항성차이를 구분한 결과를 요약하면 다음과 같다. 1. 3년간에 걸친 5회의 실험에서 모두 공시품종간 피해도의 차이는 확실하였으며 어느 경우에나 피해도의 유전분산이 환경분산보다 훨씬 큰 값을 보였다. 2. 2∼3년간 계속해서 공시되었던 품종들의 피해도는 년차간 그리고 재배시기간에 정의 상관관계가 인정되었다. 3. 1984년을 제외하고는 공시한 벼 품종의 출수기와 피해도 간에 부의 상관관계가 인정되고 있어 출수기가 늦은 품종군은 피해도의 평균치도 낮고 품종간 변이폭도 좁았다. 4. 자연포장에서 잎집무늬마름병에 대한 저항성 검정은 비슷한 출수기를 가진 품종들끼리 피해도가 비교되어야 하며 만생종 및 극만생종은 별도의 조건에서 재배, 접종 및 피해도 조사가 이루어져야한다. 5. 국내육성종 중에서 가야벼는 조생종에 속하면서도 3년간 5회의 검정실험에서, 그리고 SR9713- 54- 3은 중대종이면서 2년간 3회의 검정실험에서 비교적 낮은 피해도 값을 보여 이 두 품종은 잎집무늬마름병에 대하여 안정적인 중도저항성(MR)을 보여 주었다.

  • PDF

치위생과 학생의 임상실습에 관한 의식실태조사 (Research on the Actual Condition of Consciousness that the Students in Dept. of dental hygiene have about Clinical Training)

  • 강용주;장계원
    • 한국치위생학회지
    • /
    • 제4권1호
    • /
    • pp.1-17
    • /
    • 2004
  • The purpose of this study is to investigate the actual condition of consciousness that the students in Dept. of dental hygiene who will be engaged in dental hygiene at a dental office in the future have about a clinical training, to see whether there is any difference between the results, and then to provide fundamental data which can be helpful to develop more effective clinical training programs. For this, we investigated consciousness, that 114 daytime school students and evening school students(76 daytime school students and 38 evening school students) in Dept. of dental hygiene in J college have, using questionnaires on clinical training with Self-Administrated Method. SPSS 12.0 for Windows was used to analyze all of the questionnaires, and the results analyzed at meaningful level a=.05 are like followings: 1. The degree of satisfaction on clinical training was high as average 3.30 ; it was high in case of night training as 3.34, and of a dental office in a general hospital and an university hospital as 3.83. The degree of stress caused by clinical training was high as average 3.30, and it means that they are under relatively heavy pressure ; it was shown they got the most heavy stress as 3.39 at night, as 3.68 at a dental clinic 2. The students showed the highest tendency to recognize that clinical training is needed "for learning various clinical case experiences" as average 3.54 ; the students trained at daytime showed the highest average 3.55, and at a clinical hospital, the highest average 3.64. 3. In the study on an actual condition of consciousness about clinical training according to class difference by time(at day time and at night), there is meaningful difference between two kinds of class ; the students trained at day time showed average 2.68 that they don't like to attend, on the other hand the students at night showed higher average 2.84(p<.05). In the study on an actual condition of consciousness about clinical training according to the institutions they are trained, there is meaningful difference at satisfaction on learning method and amount of assignment : they show the highest degree of satisfaction on the learning method in case of working at a dental office in a general hospital and an university hospital as average 3.3(p<.0.1) ; the amount of assignment was shown most high at a dental clinic and a dental office in a general hospital and an university hospital as average 3.00 each(p<.05). 4. In the study of the degree of satisfaction on the clinical training, it has relatively high connections with learning contents(r=.656), learning methods(r=.497), special lessons and supplementary lessons(r=.472), the case they don't like attend at work (r=-.439), discriminatory treatment(r=-.25l), respectability on the senior dental hygienists(r=.464), a social status of a dental hygienist(r=.213), the degree of satisfaction from the relationship with other dental hygienists(r=.274), the degree of understanding which clinical training institutions have on the trained students(r=.494), trainers' ability to teach the students(r=.499). enthusiasm on guiding (r=.523), the amount of assignment(r=.333). 5. In the study on stress they got from a clinical training, it has relatively high connections with learning contents(r=-.399). learning methods(r=-.536), comprehension on training program(r=-.208), special lessons and supplementary lessons(r=-.306), the case they don't like attend at work(r=.467), discriminatory treatment(r=.366), respectability on the senior dental hygienists(r=-.341), a social status of a dental hygienist(r=-.l97), the degree of satisfaction from the relationship with another dental hygienists(r=-.289), the degree of understanding which clinical training institutions have on the trained students(r=-.430), trainers' ability to teach the students(r=-.396), enthusiasm on guiding(r=-.495).

  • PDF

자극의 인출난이도와 연합강도가 기억억제에 미치는 효과 (The Effect of Retrieval Difficulty and Association Strength on Memory Inhibition)

  • 정윤재
    • 인지과학
    • /
    • 제34권1호
    • /
    • pp.21-38
    • /
    • 2023
  • 본 연구는 인출 연습의 난이도 수준과 범주와 범주 내 자극의 연합강도가 기억억제에 미치는 효과를 알아보기 위해 수행되었다. 기존의 연구들은 대부분 인출 연습 범주 내 비 인출 연습 단어의 연합강도나 정서가, 물리적 특성 조작을 통해 같은 인출 연습 동안 떠오르는 정도를 조작해 억제가 이루어지는지 연구되었다. 따라서 인출 연습 시 인출 자극의 인출 정도의 난이도가 달라질 때 어떻게 억제가 발생되는지 연구될 필요성이 있다. 인출의 난이도는 인출 학습 시 제시되는 떠올려야 하는 단어의 자음과 모음의 제시 정도를 통해 어려운 조건, 보통 조건, 쉬운 조건의 세 수준으로 조작되었다. 또한 추가적으로 범주와 범주 내 단어들 간의 연합강도가 조작되었다. 기존의 연구에서는 범주와 범주 내 단어들 간의 연합강도가 강한 조건에서는 인출 유도 망각이 발생된 반면, 범주와 범주 내 단어들 간의 연합강도가 약한 조건에서는 인출 유도 망각이 발생되지 않았다. 본 연구에서는 인출 난이도에 따라 억제 과정이 다르게 나타날 경우 범주와의 연합강도에 따라 기존의 연구결과와 다르게 나올 가능성을 탐구하였다. 연구 결과 범주와 범주 내 단어들의 연합강도가 강한 조건에서는 인출 난이도가 어려운 조건과 보통 조건에서 인출 유도 망각이 관찰된 반면, 인출 난이도가 쉬운 조건에서는 인출 유도 망각이 관찰되지 않았다. 그리고 연합 강도가 약한 조건에서는 인출 난이도가 어려운 조건에서 인출 유도 망각의 경향성을 보인 반면, 난이도가 보통 조건과 쉬운 조건에서는 인출 유도 망각이 나타나지 않았다. 이러한 결과는 인출 난이도에 따라서 기억 억제가 다르게 나타날 가능성이 시사된다.

Anticorrosive Monitoring and Complex Diagnostics of Corrosion-Technical Condition of Main Oil Pipelines in Russia

  • Kosterina, M.;Artemeva, S.;Komarov, M.;Vjunitsky, I.;Pritula, V.
    • Corrosion Science and Technology
    • /
    • 제7권4호
    • /
    • pp.208-211
    • /
    • 2008
  • Safety operation of main pipelines is primarily provided by anticorrosive monitoring. Anticorrosive monitoring of oil pipeline transportation objects is based on results of complex corrosion inspections, analysis of basic data including design data, definition of a corrosion residual rate and diagnostic of general equipment's technical condition. All the abovementioned arrangements are regulated by normative documents. For diagnostics of corrosion-technical condition of oil pipeline transportation objects one presently uses different methods such as in-line inspection using devices with ultrasonic, magnetic or another detector, acoustic-emission diagnostics, electrometric survey, general external corrosion diagnostics and cameral processing of obtained data. Results of a complex of diagnostics give a possibility: $\cdot$ to arrange a pipeline's sectors according to a degree of corrosion danger; $\cdot$ to check up true condition of pipeline's metal; $\cdot$ to estimate technical condition and working ability of a system of anticorrosive protection. However such a control of corrosion technical condition of a main pipeline creates the appearance of estimation of a true degree of protection of an object if values of protective potential with resistive component are taken into consideration only. So in addition to corrosive technical diagnostics one must define a true residual corrosion rate taking into account protective action of electrochemical protection and true protection of a pipeline one must at times. Realized anticorrosive monitoring enables to take a reasonable decision about further operation of objects according to objects' residual life, variation of operation parameters, repair and dismantlement of objects.

Directionally Transparent Energy Bounding Approach for Multiple Degree-of-Freedom Haptic Interaction

  • 김재하;김종필;서창훈;류제하
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2009년도 학술대회
    • /
    • pp.2068-2071
    • /
    • 2009
  • This paper presents a multiple degree-of-freedom (dof) energy bounding approach (EBA) to enhance directional transparency while guaranteeing stability for multiple-dof haptic interaction. It was observed that the passivity condition for multiple ports may lead to some oscillatory limit cycle behaviors in some coordinate directions even though the total sum of energy flow-in is positive, meaning that the system is passive. The passivity condition, therefore, needs to be applied to each coordinate in order to avoid oscillatory behavior by keeping each energy flow-in always positive. For guaranteeing passivity, which in turn, stability in each coordinates, the EBA is applied. For multiple-dof haptic interaction, however, the EBA in each coordinate may distort the direction of the force vector to be rendered since the EBA may cut down the magnitude of the force and torque vectors to be rendered in order to ensure the passivity. For avoiding this problem, a simple projection method is presented. The validity of the proposed algorithm is shown by several experiments.

  • PDF

프레팅 조건 하에서 스틱-슬립 현상이 마찰력에 미치는 영향 (Influence of Stick-Slip Behavior on the Friction Force under Fretting Conditions)

  • 이영제;정성훈;용석주
    • Tribology and Lubricants
    • /
    • 제21권1호
    • /
    • pp.16-20
    • /
    • 2005
  • Friction and wear characteristics between two steel surfaces under fretting condition are investigated experimentally. The fretting damage caused by low-amplitude oscillatory sliding can be classified into three regimes of gross-slip, mixed-slip and partial-slip due to stick-slip phenomenon. One of the most important characteristics of fretting wear is the transition from gross-slip to mixed-slip. This study was focused on getting the degree of stick-slip out of the friction transition under fretting condition. Fretting wear is divided into three conditions of gross-slip/mixed-slip/partial-slip. The criteria for the division are friction and displacement amplitude, wear scar morphology and dissipated energy. In this test, friction force and displacement were measured for detecting the transition from mixed-slip to gross-slip and qualitatively predicting the degree of the wear.

Drain 타설심도에 따른 압밀효과에 관한 연구 (A Study on the Effect of Consolidation according to the depth of Vertical Drains)

  • 손대산;장정욱;박춘식
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.1187-1194
    • /
    • 2006
  • This study analyzed characteristics of soft ground consolidation according to depths of vertical drain. As the result, when the depth ratio of vertical drains (L/D) were 0.5, 0.7, and 1.0, consolidation characteristics were similar up to 70% in consolidation degree under one-dimensional drain condition. However, above this degree, consolidation speed became slower as L/D became smaller. Two-dimensional drain condition also showed a similar tendency, but when L/D was 1.0, the consolidation speed was relatively higher.

  • PDF

A numerical study on anisotropic strength of a rock containing fractures under uniaxial compression condition

  • Ohk Jin-Wook;Moon Hyun-Koo
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.150-155
    • /
    • 2003
  • Fractures in the form of micro cracks are commonly found in natural rocks. A rock behaves in a complex way due to fracture; in particular, the anisotropic strength of a rock material is significantly influenced by the presence of these fractures. Therefore, it is essential to understand the failure mechanism of a fractured rock. In this study, a fractured rock is formulated in terms of fabric tensor based on geometric and mechanical simplifications. In this way, position, density and shape of fractures can be determined by the fabric tensor so that rocks containing multi-fractures can successfully be modeled. Also an index to evaluate the degree of anisotropy of a fractured rock is proposed. Hence, anisotropic strength of a rock containing fractures under uniaxial compression condition is estimated through a series of numerical analyses for the multi-fractured model. Numerical investigations are carried out by varying the fracture angle from $0^{\circ}\;to\;90^{\circ}$ and relationship between uniaxial compression strength and the degree of anisotropy is investigated. By comparing anisotropic strength of numerical analysis with analytic solution, this study attempts to understand the failure mechanism of rock containing fractures.

  • PDF

곱셈형 불확실성을 갖는 서보계의 강인한 안정성 (Robust Stability of a Servosystem with Multiplicative Uncertainty)

  • 김영복
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제20권2호
    • /
    • pp.125-125
    • /
    • 1996
  • In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers robust stability of this 2DOF servosystem to the unstructured uncertainty of the controlled plant. A robust stability condition is obtained using Riccati inequality, which is independent of the gain of the integral compensator. An example is presented, which demonstrates that the tracking response of the 2DOF servosystem with uncertainty becomes faster when the integral gain made larger under the robust stability condition.