• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.113-116
• /
• 2000

Phase noise of oscillator gives the performance degradation significantly when a high carrier frequency and low transmission rate are used. The BER(Bit Error Rates) degradation of QPSK(Quadrature Phase Shift Keying) transmission is analyzed with the oscillator phase noise level specified in downstream physical interface of LMDS(Local Multipoint Distribution Services) which is described in DAVIC(Digital Audio Visual Council). The model used for the phase noise is a power-law model. We also investigated the effects of the various transmission rates on system performance. For the transmission rate below 0.5 Mbps, the BER performance is severely degraded and we verified that the transmission rate, 20 Mbps, is adequate for the downstream of LMDS systems.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.358-361
• /
• 2004

The photocatalytic degradation of Endocrine Discruptors, dibuthyl phthalate(DBP) has been investigated over TiO$_2$ photocatalysts irradiated with a ultraviolet (UV) light. The effect of operational parameters, i.e., reaction time, light intensity, pH and additive on the degradation rate of aqueous solution of Endocrine Discruptors has been examined. Results show that the employment of efficient photocatalysts and the selection of optimal operational parameters may lead to degradation of Endocrine Discruptors solutions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
• /
• pp.47-51
• /
• 2001

The electrical degradation phenomena of epoxy composites to be used as a molding material for transformers were studied. The electrets were first manufactured by applying high voltages to five kinds of specimens given a mixing rate, and then TSC(Thermally Stimulated Current) values at the temperature range of $-160\sim200[^{\circ}C]$ were measured from a series of experiments. The behaviour of carrier and its origin in epoxy composites were examined, respectively, And various effects of electrical degradation on epoxy composites were also discussed in this study.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.364-367
• /
• 2003

In this paper, we have examined the MTBE cometabolic degradation by pure culture, which is isolated gasoline contaminated aquifer. Propane was more effectively utilized as a growth substrate to oxidize MTBE. Specific substrate degradation rate was Increased with increasing initial propane amount. Respiking propane was enhanced and continued MTBE degradation and TBA observation was supported MTBE degradation. The mass balance of MTBE and TBA indicated that MTBE was oxidized to TBA as well as further oxidation of TBA.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.193-200
• /
• 2004

Determination of sample sizes and the inspection intervals for degradation tests is considered. The cases of degradation rate model and degradation path model are analyzed with some examples. Tightened critical value tests are also considered that are shown to be advantageous over non-tightened ones.

• 대한화학회지
• /
• 제56권1호
• /
• pp.92-101
• /
• 2012

The degradation of one of the commercially important hydrogel based on acrylic acid and acryl amide, (acrylic acid-co-acryl amide) hydrogels, by means of ultrasound irradiation and its combination with heterogeneous ($TiO_2$) was investigated. 24 kHz of ultrasound irradiation was provided by a sonicator, while an ultraviolet source of 16 W was used for UV irradiation. The extent of sonolytic degradation increased with increasing ultrasound power (in the range 30-80 W). $TiO_2$ sonophotocatalysis led to complete (acrylic acid-co-acryl amide) hydrogels degradation with increasing catalyst loading, while, the presence of $TiO_2$ in the dark generally had little effect on degradation. Therefore, emphasis was totally on the sonolytic and sonophotocatalytic degradation of hydrogels and a synergy effect was calculated for combined degradation procedures (Ultrasound and Ultraviolet) in the presence of $TiO_2$ nanoparticles. $TiO_2$ sonophotocatalysis was always faster than the respective individual processes due to the enhanced formation of reactive radicals as well as the possible ultrasound-induced increase of the active surface area of the catalyst. A kinetics model based on viscosity data was used for estimation of degradation rate constants at different conditions and a negative order for the dependence of the reaction rate on total molar concentration of (acrylic acid-co-acryl amide) hydrogels solution within the degradation process was suggested.

• Korean Chemical Engineering Research
• /
• 제50권5호
• /
• pp.778-782
• /
• 2012

최근까지 대부분의 PEMFC MEA (Membrane and Electrode Assembly) 열화 연구는 전극과 전해질막 각각 분리되어 연구되었다. 그런데 실재 PEMFC 운전조건에서는 전극과 막은 동시에 열화된다. 그래서 본 연구에서는 전극과 막열화가 동시에 일어나는 조건에서 열화 가속시험을 하였다. 실험결과 전극과 막 열화가 서로 상호작용함을 보였다. 막열화는 촉매의 활성면적 감소폭을 줄였고, 전극열화는 막의 수소투과 전류와 불소유출속도(FER) 증가폭을 감소시켰다.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.16-22
• /
• 2023

In a solar cell, degradation refers to the decrease in performance parameters caused by defects originated due to various causes. During the fabrication process of solar cells, degradation is generally related to the processes such as passivation or firing. There exist sources of many types of degradation; however, the exact cause of Light and elevated Temperature Induced Degradation (LeTID) is yet to be determined. It is reported that the degradation and the regeneration occur due to the recombination of hydrogen and an arbitrary substance. In this paper, we report the deposition of Al₂O₃ and SiN_X on silicon wafers used in the Passivated Emitter and Rear Contact (PERC) solar structure and its degradation pattern. A higher degradation rate was observed in the sample with single layer of Al₂O₃ only, which indicates that the degradation is affected by the presence or the absence of a passivation thin film. In order to alleviate the degradation, optimization of different steps should be carried out in consideration of degradation in the solar cell fabrication process.

• 한국환경보건학회지
• /
• 제38권3호
• /
• pp.251-260
• /
• 2012

Objectives: The purpose of this study was evaluating the applicability of the circulation dielectric barrier plasma process (DBD) for efficiently treating non-biodegradable wastewater, such as phenol. Methods: The DBD plasma reactor system in this study consisted of a plasma reactor (discharge, ground electrode and quartz dielectric tube, external tube), high voltage source, air supply and reservoir. Effects of the operating parameters on the degradation of phenol and $UV_{254}$ absorbance such as first voltage (60-180 V), oxygen supply rate (0.5-3 l/min), liquid circulation rate (1.5-7 l/min), pH (3.02-11.06) and initial phenol concentration (12.5-100 mg/l) were investigated. Results: Experimental results showed that optimum first voltage, oxygen supply rate, and liquid circulation rate on phenol degradation were 160 V, 1 l/min, and 4.5 l/min, respectively. The removal efficiency of phenol increased with the increase in the initial pH of the phenol solution. To obtain a removal efficiency of phenol and COD of phenol of over 97% (initial phenol concentration, 50.0 mg/l), 15 min and 180 minutes was needed, respectively. Conclusions: It was considered that the absorbance of $UV_{254}$ for phenol degradation can be used as an indirect indicator of change in non-biodegradable organic compounds. Mineralization of the phenol solution may take a relatively longer time than that required for phenol degradation.

• Journal of Microbiology and Biotechnology
• /
• 제14권5호
• /
• pp.901-905
• /
• 2004

The degradation and mineralization of crude oil were investigated over 50-days in three soils, loamy sand, sand, and combusted loamy, which were artificially contaminated with crude oil (50 g $kg^{-1}$) and inoculated with Nocardia sp. H17-1. The degradation efficiency of total petroleum hydrocarbon (TPH) in sand was the highest at 76% among the three soils. The TPH degradation rate constants $(k_{TPH})$ in loamy sand, sand, and combusted loamy sand were 0.027 $d^{-1}$, 0.063 $d^{-1}$, and 0.016 $d^{-1}$, respectively. In contrast, the total amount of $CO_2$ evolved was the highest at 146.1 mmol in loamy sand. The $CO_2$ evolution rate constants (k_{CO2})$ in loamy sand, sand, and combusted loamy sand were 0.057 $d^{-1}$, 0.066 $d^{-1}$, and 0.037 $d^{-1}$, respectively. Therefore, it seems that the degradation of crude oil in soils can be proportional to the soil pore space and that mineralization can be accelerated with the increase of organic substance.