• 소음진동
• /
• 제10권5호
• /
• pp.880-885
• /
• 2000

In a verical type, vibratory gyroscope, the coupled motion between the reference and sensing vibrations causes the zero-point output which means non-zero sensing vibration without angular velocity. This structural coupling leaks to an inherent discrepancy between the natural frequencies of the reference and sensing oscillations, causing the degradation of the sensing performance and dynamic stability. In this paper, the dynamic characteristics associated the coupling phenomenon are theoretically analyzed. Effects of reference frequency and coupling factor on the rotational direction and amplitude of elliptic oscillation are studied. A technique to predict the existence of curve veering of crossing in frequency trajectories is introduced to apply the design of micro gyroscopes with decoupled structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.207-210
• /
• 2005

The objective of this research is to evaluate of seismic performance for reinforced concrete bridge piers with lap splices of longitudinal reinforcement steels using predict of nonlinear hysteric behavior. For the purpose, analytical trilinear hysteretic model has been used to simulate the force displacement hysteretic curve of RC bridge piers under repeated reversal loads. The moment capacity and corresponding curvature in the plastic hinge have been determined, and the enhanced hysteretic behavior model by five different kinds of branches has been proposed for modeling the stiffness variation of RC section under cyclic loading. The strength and stiffness degradation index are introduced to compute the hysteretic curve vary confinement steel ratio. In addition, the modified curvature factor has been introduced to forecast of seismic performance of longitudinal steel lap spliced and retrofitted specimens.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.457-460
• /
• 1999

The effects of electrical positive stress on n-channel LDD and offset structured poly-Si TFT\`s have been systematically investigated in order to analyze the transfer curve\`s shift mechanism. It has been found that the LDD and offset regions behave as a series resistance that reduce the electric field near drain. Hot carrier effects are reduced because of these results. After electrical stress transfer curve’s shift and variation of the off-current are dependent upon the offset length rather than offset region’s doping concentration. Variation of the subthreshold slope is dependent upon offset region’s doping concentration as well as offset length.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.372-378
• /
• 2018

Life management technology is required as the failure risk of aged power transformers increases. Asset management technology is developed to evaluate the remaining life, establish the replacement strategies, and decide the optimal investment based on the reliability and economy of power transformers. The remaining life assessment uses data such as installation, operation, maintenance, refurbishment, and failure of power transformers. The optimal investment also uses data such as maintenance, outage, and social costs. To develop the asset management system for power transformers, determining the degradation parameters related to the aging of power transformers and evaluating the condition of power transformers using these parameters are important. In this study, since 1983, 110,000 Dissolved Gas Analysis (DGA) data have been analyzed to determine the degradation parameters related to the aging of power transformers. The alarm rates of combustible gases ($H_2$, $C_2H_2$, $C_2H_4$, $CH_4$, and $C_2H_6$), TCG, CO, and $CO_2$ were analyzed. The end of life and failure rate (bathtub curve) of power transformers were also calculated based on the failure data from 1981 to 2014. The DGA gases related to discharge, overheating, and insulation degradation were determined based on alarm and failure rates. $C_2H_2$, $C_2H_6$, and $CO_2$ were discharge, oxidation, and insulation degradation parameters related to the aging of power transformers.

• 분석과학
• /
• 제37권1호
• /
• pp.25-38
• /
• 2024

The study aimed to investigate a novel approach by utilizing liquid chromatography (LC) and liquid chromatography-mass spectrometry (LC-MS) to separate, identify and characterize very nominal quantities of degradation products (DPs) of balsalazide along with its process related impurities without isolation from their reaction mixtures. The impurities along with balsalazide were resolved on spherisorb ODS2 (250×4.6 mm, 5.0 ㎛) column at room temperature using 0.2 M sodium acetate solution at pH 4.5 and methanol in the ratio of 55:45 (v/v) as mobile phase pumped isocratically at 1.0 mL/min as mobile phase and UV detection at 255 nm. The method shows sensitive detection limit of 0.003 ㎍/mL, 0.015 ㎍/mL and 0.009 ㎍/mL respectively for impurity 1, 2 and 3 with calibration curve liner in the range of 50-300 ㎍/mL for balsalazide and 0.05-0.30 for its impurities. The balsalazide pure compound was subjected to stress studies and a total of four degradation products (DPs) were formed during the stress study and all the DPs were characterized with the help of their fragmentation pattern and the masses obtained upon LC-MS/MS. The DPs were identified as 3-({4-[(E)-(4-hydroxyphenyl) diazenyl]benzoyl}amino)propanoic acid (DP 1), 4-[(E)-(4-hydroxyphenyl)diazenyl] benzamide (DP 2), 5-[(E)-(4-carbamoylphenyl)diazenyl]-2-hydroxybenzoic acid (DP 3) and 3-({4-[(E)-phenyldiazenyl]benzoyl}amino)propanoic acid (DP 4). Based on findings, it was concluded that, the proposed method was successfully applicable for routine analysis of balsalazide and its process related impurities in pure drug and formulations and also applicable for identification of known and unknown impurities of balsalazide.

• 물과 미래
• /
• 제28권6호
• /
• pp.169-181
• /
• 1995

1986년 이후 급격한 하상변동에도 불구하고 고안지점의 수위-유량 관계곡선에 대한 수정작업이 이루어지지 않아 '90년 홍수시 한강홍수통제소로 제보된 팔당댐 하류부 수위나 방류량 자료들이 고안지점에서 계측된 수위자료에 의한 유량자료와의 비교에서 서로 간의 신뢰도에 문제가 발생하였다. 따라서 본 연구에서는 댐하류부의 하상변동을 고려하여 팔당댐에서 고안지점 하류를 포함하는 약 2.2km 구간에 대해 1/100 축척의 수리모형실험을 실시하였으며, 이를 통해 새로이 작성된 팔당댐 방류량 산정공식에 의한 방류량자료와 고안지점에서의 수위자료를 이용하여 새로운 수위-유량 관계곡선을 작성하였다. 한편 수리모형 실험성과로 작성한 수위-유량 관계곡선을 RMA-2V모형에 의한 수치모형을 이용하여 기존의 수위-유량 관계 곡선 및 새로운 수위-유량 관계곡선을 비교, 검정하였다.

• Asian Journal of Atmospheric Environment
• /
• 제3권1호
• /
• pp.19-26
• /
• 2009

The environmental Kuznets curve hypothesis assumes an inverted U-shaped relationship between environmental damage and income, and such curves have been used to study how economic growth affects the environment. In this study, we analyzed data for gross domestic product (GDP) per capita and for sulfur emissions in the industrialized countries of the United Kingdom, United States of America, and Japan, as well as data for the developing country of China, to determine the relationship between emissions and income in these countries. Attempts by these countries' governments to incorporate environmental policy considerations into the income-environment relationship were also examined. The potential role of the environmental Kuznets curve as a policy tool was investigated. We determined that, at least in the case of sulfur emissions, policies and institutions significantly reduced environmental degradation in the industrialized countries studied. Furthermore, the environmental Kuznets curve can reliably predict the future relationship between environmental impact and GDP for developing countries.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권5호
• /
• pp.295-303
• /
• 2022

This study investigates the impact of globalization, coal consumption, and economic growth on CO₂ emissions in Malaysia by applying the Kuznets Environmental Curve model. The study employed the Autoregressive Distributed Lag modeling technique on time series data over the period of 1970-2018 to determine the short and long-run relationship between CO₂ emissions and a number of variables, including globalization, coal consumption, and economic growth. The results show that globalization increase CO₂ emissions in both the short and long run in Malaysia. Furthermore, the results reveal that economic growth and coal consumption degrade the environmental quality by accelerating the CO₂ emissions in the short-run and long run. As a result, the findings validate the Kuznets Environmental Curve hypothesis of an inverted U-shaped relationship between economic growth and CO₂ emissions in the long run for Malaysia. The findings of this study suggest that higher globalization levels and usage of coal consumption degrade the environmental quality in Malaysia. The findings also indicate the effect of economic growth on environmental degradation is positive at the initial stage but improves after the economy achieves a threshold level of income per capita in the economic development process with an inverted U-shaped pattern in the long run.

• 한국터널지하공간학회 논문집
• /
• 제16권3호
• /
• pp.311-320
• /
• 2014

화재 시 고강도 콘크리트는 보통강도 콘크리트보다 강도의 감소가 빠르게 나타날 뿐만 아니라 단면손실을 발생시키는 스폴링(spalling)에 취약하다. 본 연구에서는 PET섬유가 혼입된 고강도 세그먼트 콘크리트를 대상으로 ISO834 화재곡선과 RABT 화재곡선 하에서 화재저항성을 평가하였다. 화재저항성을 시험한 결과, PET섬유가 혼입되지 않았을 경우에 ISO834 화재곡선과 RABT 화재곡선 하에서 콘크리트의 단면손실은 약 8 cm, 9.5 cm로 측정되었다. ISO834 화재곡선 하에서 PET섬유가 0.1% 혼입되었을 경우에는 단면손실이 발생하지 않았으나, RABT 화재곡선 하에서는 PET섬유가 0.1% 혼입되었을 경우에는 6.5 cm의 단면손실이 발생하였다. RABT 화재곡선 하에서는 PET섬유가 0.2% 혼입되었을 경우에 단면손실이 발생하지 않았다. 따라서 본 연구에서 사용한 세그먼트 콘크리트는 PET섬유의 혼입량이 0.1%일 때 ISO834 화재곡선 하에서 내화성능을 확보하였으며 RABT 화재곡선 하에서는 PET섬유의 혼입량이 0.2%일 때 내화성능을 가지는 것으로 나타났다. 그러나 단면손실이 발생하지 않았더라도 가열면으로부터 4 cm까지의 손상된 표면의 보수보강이 필요한 것으로 판단된다.

• 한국지진공학회논문집
• /
• 제8권5호통권39호
• /
• pp.45-54
• /
• 2004

기존의 철근콘크리트 부재의 이력모델은 실험에 기초한 경험식을 사용하여 주기거동시 나타나는 강성저하를 나타내는데 중점을 두므로, 에너지소산능력을 정확히 예측할 수 없다. 최근 다양한 설계변수의 영향을 고려하여 주기거동 동안 소산하는 에너지를 정확히 계산할 수 있는 설계식이 개발되었다. 본 연구에서는 이러한 설계식에 기초하여 휨지배 부재에 대한 에너지기초이력모델(Energy-Based Hysteretic Model)을 개발하였다. 제안된 모델은 완전한 주기거동을 할 경우 실제거동과 동일한 에너지를 소산하도록 고안된 선형모델로, 주곡선(Primary Curve)과 주기곡선(Cyclic Curve)을 근간으로 하고 다섯 가지 제하/재하 규칙을 적용하여 핀칭 및 강성저하를 수반하는 주기거동을 나타낸다. 본 연구에서는 다양한 실험과의 비교를 통하여 제안된 이력모델의 정확성과 유효성을 검증하였다. 제안된 이력모델은 간단하면서도 수치해석의 적용에 용이하므로, 정적 및 동적 비선형 해석/설계 프로그램의 개발에 사용할 수 있다.