• The korean journal of orthodontics
• /
• v.18 no.2
• /
• pp.329-342
• /
• 1988

In methods of finding causes for cleft palate, many cases have been studied by investigators using teratogenic agents. Among them, a synthetic agent known as triamcinolone acetonide (TA) was widely used. When this drug was injected into mice during palatogenesis, it induced lowered body weight and a deformed mandible. But many cases have been studied on growth changes, only of the developmental stages of the palate. Therefore, the objective of this study was to evaluate craniofacial growth in experimentally induced cleft palate mice after finishing palatogenesis namely just before birth. Normal, alcohol treated, and TA treated DDY mice were obtained at 18-days of gestation and heads were prepared for serial sectioning in the sagittal plane. The midsagittal sections were photographically enlarged (${\times}40$) and measurements made to asses the amount of growth. The obtained results were as follows. 1. The incidence of cleft palate was 41.2% when TA was injected. 2. The body weight of the cleft palate group was lower than the control group. 3. In the cleft palate group, mandibular length (H-M) was lighter than the control group. 4. In the cleft palate group, degree of staining was not distinct compared to the control group by the double staining method. 5. In the cleft palate group, anteroposterior posture of the tongue tip to facial plane (C-M) was more posterior than the control group. 6. The cause of posterior posture of the tongue tip to facial plane (C-M) in the cleft palate group, was not short and retracted tongue but the mandibular length was increased. 7. The anteroposterior relationship of hyoid cartilage to cranial base was the same in all groups.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.2
• /
• pp.199-202
• /
• 1991

Chin is located on most prominent portion of the face, so make more important esthetic value in impression. So historicaly, many authors had made efforts on correction of deformed chin, termed genioplasty. But those technique have been performed on limited cases, which have normal shape or width of chin. In the cases with more narrow or short chin, location of mental foramen or root of incisors restrict the use of such technique. But modified genioplasty technique we used can be performed without any restriction and change of frontal profile of chin. So we report a case that was performed with modified horizontal step osteotomy for advancement genioplasty, which had been reported by Hinds and Kent, with some complications.

• Archives of Reconstructive Microsurgery
• /
• v.4 no.1
• /
• pp.16-22
• /
• 1995

We analyzed 11 children who underwent epiphyseal transplantation to the forearm for manage growing deformity ranged from 2 years 6 months to years(average 5 years 10 months) follow-up period. Etiologies of the functional impairment of the eleven were five traumatic, three congenital and three tumorous conditions. Lesions of epiphysis were distal radius in eight patients and distal ulna in three patients. Operation was performed with removal of non-functioning or deformed epiphysis followed by transplantation of free vascularized proximal fibular epiphysis with microvascular anastomesis. Evaluation was performed radiologically and functionally. The 9(81.8%) patients showed growth of transplanted epiphysis by radiological examination during follow up. At the last follow up, average growth rate was 0.86cm per year excepts 2 cases of no growth. Active wrist motion near normal to contralateral joint was achieved in 7 patients. In other 2 patients, active joint motion was improved but weaker than contralateral joint. Complications on donor site were two transient peroneal nerve palsy which have been resolved after 2 and 5 months post operation and one valgus ankle deformity. The ankle deformity was corrected with $Langenski\"{o}ld$ operation of the dital tibiofibular fusion. At recipient site, there was one superficial infection and it was easily controlled by systemic antibiotics. Many subsequent reports have described successful nonvascularized epiphyseal transplante, but overall results have been inconsistent and unsatisfactory. Other experimental and clinical studies in the transfer of vascularized epiphyses has encourage its clinical application. We also could gel successful growth in several cases with free vascularized epiphyseal transplantation.

• Korea-Australia Rheology Journal
• /
• v.17 no.3
• /
• pp.125-130
• /
• 2005

Coalescence process of binary immiscible fluid mixtures having bimodal size distributions, prepared by mixing two pre-sheared samples at different shear rates, ${\gamma}_{pre1}\;and\;{\gamma}_{pre2}$, under shear flow at a final shear rate, ${\gamma}_f$, are examined by transient shear stress measurements and microscopic observations in comparison with the results for simply pre-sheared samples having narrow size distributions (unimodal distribution samples). Component fluids are a silicone oil (PDMS) and a hydrocarbon-formaldehyde resin (Genelite) and their viscosities are 14.1 and 21.0 $pa{\cdot}sec$ at room temperature $(ca.\;20^{\circ}C)$, respectively. The weight ratio of PDMS: Genelite was 7:3. Three cases, $({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;({\gamma}_{pre1}=0.8sec^{-1},\;{\gamma}_{pre2}=4.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;and\;({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0^sec^{-1}\;and\;{\gamma}_f=7.2sec^{-1})$ the first case, transient shear stress did not show any significant difference but domains larger than the initial state are observed at short times. In the latter cases, there exist undershoot of shear stress, reflecting existence of deformed large domains, which is confirmed by the direct observation. It is concluded that coalescence between large and small domains more frequently occur than coalescence between the domains with similar size in the bimodal distribution samples.

• Archives of Plastic Surgery
• /
• v.50 no.6
• /
• pp.550-556
• /
• 2023

Blunt breast trauma occurs in 2% of blunt chest injuries. This study aimed to evaluate the evidence on breast reconstruction after blunt trauma associated with the use of a seat belt. Also, we describe the first case of breast reconstruction using the Ribeiro technique. In November 2022, a systematic search of MEDLINE, EMBASE, and Google Scholar databases was conducted. The literature was screened independently by two reviewers, and the data was extracted. Our search terms included breast, mammoplasty, blunt injury, and seat belts. In addition, we present the case of a woman with a left breast deformity and her reconstruction using the inferior Ribeiro flap technique. Six articles were included. All included studies were published between 2010 and 2021. The studies recruited seven patients. According to the Teo and Song classification, seven class 2b cases were reported. In five cases a breast reduction was performed in the deformed breast with different types of pedicles (three superomedial flaps, one lower flap, one superior flap). Only one case presented complications. The case here presented was a type 2b breast deformity in which the lower Ribeiro pedicle was used successfully without complications during follow-up. Until now there has been no consensus on reconstructive treatment due to the rarity of this entity. However, we must consider surgical treatment individually for each patient. We believe that the Ribeiro technique is a feasible and safe alternative in the treatment of posttraumatic breast deformities, offering very good long-term results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.52-63
• /
• 2008

The side collision reconstruction algorithm is developed using three dimensional car crash analysis. Medium size passenger car is modeled for finite element analysis. Total 24 side collision configurations, four different speed and six different angle, are set up for making side collision database. Deformation index and degree index are built up for each collision case. Deformation index is a kind of deformation estimate averaging displacement of side door of crashed car from finite element analysis result. Angle index is constructed measuring deformed angle of crashing car. There are two kinds of angle index, one is measured at driver's side and the other is measured at passenger's side. Also a collision analysis information in side of cars is used for giving a basis for scientific and practical reason in a reconstruction of the car accident. The analysis program, LS-DYNA3D is utilized for finite element analysis program for a collision analysis. Those database are used for side collision reconstruction. Side collision reconstruction algorithm is developed, and applied to find the collision conditions before the accident occurs. Three example collision cases are tried to check the effectiveness of the algorithm. Deformation index and angle index is extracted for the case from the analysis result. Deformation index is compared to the established database, and estimated collision speed and angle are introduced by interpolation function. Angle index is used to select a specific collision condition from the several available conditions. The collision condition found by reconstruction algorithm shows good match with original condition within 10% error for speed and angle. As a result, the calculation from the reconstruction of the situation is reproducing the situation well. The performance in this study can be used in many ways for practical field using deformation index and degree index. Other different collision situations may be set up for extending the scope of this study in the future.

• Structural Engineering and Mechanics
• /
• v.13 no.6
• /
• pp.615-638
• /
• 2002

This paper presents a method of seismic analysis for a cylindrical liquid storage structure considering the effects of the interior fluid and exterior soil medium in the frequency domain. The horizontal and rocking motions of the structure are included in this study. The fluid motion is expressed in terms of analytical velocity potential functions, which can be obtained by solving the boundary value problem including the deformed configuration of the structure as well as the sloshing behavior of the fluid. The effect of the fluid is included in the equation of motion as the impulsive added mass and the frequency-dependent convective added mass along the nodes on the wetted boundary of the structure. The structure and the near-field soil medium are represented using the axisymmetric finite elements, while the far-field soil is modeled using dynamic infinite elements. The present method can be applied to the structure embedded in ground as well as on ground, since it models both the soil medium and the structure directly. For the purpose of verification, earthquake response analyses are performed on several cases of liquid tanks on a rigid ground and on a homogeneous elastic half-space. Comparison of the present results with those by other methods shows good agreement. Finally, an application example of a reinforced concrete tank on a horizontally layered soil with a rigid bedrock is presented to demonstrate the importance of the soil-structure interaction effects in the seismic analysis for large liquid storage tanks.

• Structural Engineering and Mechanics
• /
• v.64 no.5
• /
• pp.543-555
• /
• 2017

The non-linear behaviour of integral infilled frames (in which the infill and the frame are bonded together with help of various interface materials) is studied both experimentally and numerically. The experiments were carried out on one-sixth scale two-bay and three-storey reinforced concrete frames with and without infill against static cyclic loading. Three interface materials - cement mortar, cork and foam have been used in between the infill and the frame. The infill, interface and the frame are bonded together is called integral frame. The linear and non-linear behaviors of two dimensional bare frame and integral infilled frame have been studied numerically using the commercial finite element software SAP 2000. Linear finite element analysis has been carried out to quantify the effect of various interface materials on the infilled frames with various combinations of 21 cases and the results compared. The modified configuration that used all three interface materials offered better resistance above others. Therefore, the experiments were limited to this modified infilled frame case configuration, in addition to conventional (A1-integral infilled frame with cement mortar as interface) and bare frame (A0-No infill). The results have been compared with the numerical results done initially. It is found that stiffness of bare frame increased by infilling and the strength of modified frame increased by 20% compare to bare frame. The ductility ratio of modified infilled frame was 42% more than that of the conventional infilled frame. In general, the numerical result was found to be in good agreement with experimental results for initial crack load, ultimate load and deformed pattern of infill.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.8
• /
• pp.749-754
• /
• 2010

Knowledge of the characteristics of airflow in nasal cavities is essential to understand the physiological and pathological aspects of nasal breathing. In our laboratory, a series of experimental investigations on the nasal airflow was conducted; airflow in models of normal and deformed nasal cavities under both constant and periodic flow conditions was studied by PIV. Some of the patients with asymmetric nasal cavities experience pain or discomfort, while other patients with asymmetric nasal cavities do not experience pain. Airflows inside asymmetric nasal cavities with and without obstructions due to a bent nasal septum are investigated both experimentally by PIV and numerically by using the general-purpose FVM code in order to determine the reason for the above-mentioned discrepancy. The comparisons between two cases are tried. Heat and humidity distribution are investigated numerically.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.876-888
• /
• 1986

The Study is concerned with the analysis of unconstrained axisymmetric piercing as a nonsteady forging process by the rigid-plastic finite element method. In the numerical analysis of axisymmetric piercing, the initial velocity field is generated by assuming the material as a linear viscous material to begin with in order to facilitate the input handling and to ensure better convergencey. The strain-hardening effect for nonsteady deformation and the friction of the die-material interial interface are considered in the formulation. Rigid body treatment is also incorporated in the developed program. The experiments are carried out for aluminum alloy specimens (A1204) with different specimen heights. It is shown that the experimental results are in excellent agreement with the finite element simulations is deformed configuration. For load prediction the theoretical prediction shows excellent agreement with th eexperimental laod in the initial stage of loading before fracture of the specimen is not initiated. Distribution of stresses, strains and strain rates has been found for the given cases in computation. On this basis several fracture criteria are introduced in order to check the fracture initiation. It is found that maximum shear criterion is capable of good fracture prediciton.