• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.29-35
• /
• 2001

The development of filament stretching extensional rheometers over the past decade has enabled the systematic measurement of the transient extensional stress growth in dilute and semi-dilute polymer solutions. The strain-hardening in the extensional viscosity of dilute solutions overwhelms the perturbative effects of capillarity, inertia & gravity and the kinematics of the extensional deformation become increasingly homogeneous at large strains. This permits the development of a robust open-loop control algorithm for rapidly realizing a deformation with constant stretch history that is desired for extensional rheometry. For entangled fluids such as concentrated solutions and melts the situation is less well defined since the material functions are governed by the molecular weight between entanglements, and the fluids therefore show much less pronounced strain-hardening in transient elongation. We use experiments with semi-dilute/entangled and concentrated/entangled monodisperse polystyrene solutions coupled with time-dependent numerical computations using nonlinear viscoelastic constitutive equations such as the Giesekus model in order to show that an open-loop control strategy is still viable for such fluids. Multiple iterations using a successive substitution may be necessary, however, in order to obtain the true transient extensional viscosity material function. At large strains and high extension rates the extension of fluid filaments in both dilute and concentrated polymer solutions is limited by the onset of purely elastic instabilities which result in necking or peeling of the elongating column. The mode of instability is demonstrated to be a sensitive function of the magnitude of the strain-hardening in the fluid sample. In entangled solutions of linear polymers the observed transition from necking instability to peeling instability observed at high strain rates (of order of the reciprocal of the Rouse time for the fluid) is directly connected to the cross-over from a reptative mechanism of tube orientation to one of chain extension.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.55-60
• /
• 2002

For the development of a new creep test technique, the availability of SP-Creep test is discussed for 1Cr-0.5Mo boiler header material. And some results are also compared with those of 2.25Cr- 1Mo steel which widely uses as boiler superheater tube. The results can be summarized as follows. The load exponents(n) obtained by SP-Creep test for 1Cr-0.5Mo steel are decreased with increasing creep temperature and the values are 15.67, 13.89, and 17.13 at 550$^{circ}C$ ,575$^{circ}C$ and 600$^{circ}C$, respectively. The temperature dependence of the load exponent is given by n = 107.19 - 0.1108T. This reason that load exponents show the extensive range of 10∼16 is attributed to the fine carbide such as M$_{23}$C$_{6}$ in lath tempered martensitic structures. At the same creep condition, the secondary creep rate of 1Cr-0.5Mo steel is lower than the 2.25Cr-1Mo steel1 due to the strengthening microstructure composed by normalizing and tempering treatments. Through a SEM observation, it can be summarized that the primary, secondary, and tertiary creep regions of SP-Creep specimen are corresponding to plastic bending, plastic membrane stretching, and plastic instability regions among the deformation behavior of four steps in SP test, respectively.y.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.46-52
• /
• 2015

Pump-turbine system is widely used by the hydropower industry for stabilizing the electrical grid in the vast growing economy of most developed countries. This study only investigates the Fluid-structure Interaction (FSI) analysis of the pump-turbine system at various operating conditions. The FSI analysis can show how reliable each component of the system is by providing the engineer with a better understanding of high stress and deformation points, which could reduce the lifespan of the pump-turbine. Pump-turbine components are categorized in two parts, pressurized static parts and movable stressed parts. The fixed parts include the spiral casing, top and bottom cover, stay vane and draft tube. The movable parts include guide vanes and impeller blades. Fine hexahedral numerical grids were used for CFD calculation and fine tetrahedral grids were used for structural analysis with imported load solution mapping greater than 90 %. The maximum equivalent stress are much smaller than the material yield stress, and the maximum equivalent stress showed an increasing tendency with the varying of operating conditions from partial to excessive at both modes. In addition, the total deformation of all the operating conditions showed a small magnitude, which have quite small influence on the structural stability. It can be conjectured that this system can be safely implemented.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.259-267
• /
• 2005

The effects of hull flexibility on shaft alignment are growing as ship sizes are increased mainly for container carrier and LNG carrier. In order to consider hull flexibility on a propulsion shafting system, standardization of ship service conditions is necessary because hull deformation is continuously variable according to ship service conditions. How to summarize ship service conditions is suggested based on practically applicable four viewpoints : hull, engine, loading and sea status. Effects of the external forces acting on a ship propulsion shafting system are generally commented. Several design criteria regulated by classification societies are pointed at issue which seems to have Insufficient technical background. A qualitative verification is carried out to point out the invalidity of the assumption of effective supporting position. In this work, an elastic nonlinear multi-supporting bearing system is introduced as a key concept of the elastic shaft alignment. Hertz contact theory is proved to be more proper one than projected area method in calculation of the nonlinear elastic stiffness of the bearing, The squeezing and oil film pressure calculations in the long journal bearing like an after stern tube bearing are recognized as a necessary process for elastic shaft alignment design.

• 한국방재안전학회논문집
• /
• 제14권1호
• /
• pp.1-8
• /
• 2021

주름관은 자체의 신축성으로 변형에 의한 파손에 대응하고 설비의 편리성으로 인해 소방장비, 스프링클러 배관 등에 널리 사용된다. 그러나 벽의 주름진 형상으로 인해 복잡한 내부 난류유동이 발생하게 되며, 파이프 유동에 중요한 설계인자인 압력강하의 예측이 어렵다. 주름관 내의 압력강하에는 그루브 높이, 길이, 피치 등 파이프 벽의 형상 인자가 영향을 준다. 기존의 연구에는 관 내의 사각형 그루브의 피치(P)와 높이(K)의 비가 5 보다 작은 D형관의 경우에 대하여 길이 변화에 따른 압력 강하에 관하여 연구한 사례가 있다. 본 연구에서는 길이와 높이 변화를 고려한 P/K가 2.8, 3.5, 4.67의 경우 유동의 Re 수가 55,000, 70,000, 85,000인 경우에 대해 압력강하에 대한 수치해석 연구를 수행하였고, 주름관 내의 압력강하는 P/K 가 작을수록 감소하는 것으로 해석되어 압력 강하가 그루브 가로 세로 비율의 변화에 영향을 받고, 그루브 높이가 증가하면 재순환 면적이 증가하기 때문에 영향을 받는다는 것을 보여주었으며, 레이놀즈 수가 클수록 압력 강하가 증가하는 결과를 얻었다.

• 한국강구조학회 논문집
• /
• 제16권2호통권69호
• /
• pp.247-255
• /
• 2004

본 실험프로그램은 슬래브가 있는 합성보의 내진성능향상을 위해 기존 모멘트접합부의 내진보강 방법을 개발을 목적으로 수행하였다. 반복하중을 통해 5개의 실대형 합성실험체에 대한 실험을 수행하였다. 각형강관기둥과 H형강보로 이루어진 기존의 다이아프램접합부가 RBS 또는 개량수평스티프너를 통해서 하부플랜지에만 내진 보강되었다. 제안한 보강접합부의 효율성을 조사하였다. 실험결과 하부플랜지에만 RBS를 적용한 접합부는 부족한 변형성능을 나타냈지만, 개량스티프너를 적용한 합성보 접합부는 내진성능을 향상시켰다.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.109-126
• /
• 1996

이 연구에서 사용된 화학제는 NaCl이다. NaCl과 모래-벤토나이트 혼합물이 각기 다른 혼합률로 배합되어 삼축 압축 시험을 하였다(5, 10, 15%). 탄성계수와 점착력, 그리고 내부 마찰각이 구속 응력과 NaCl의 함수로 얻었다. 이로부터 구한 강도 정수를 근거로 하여 응력-변형률-강도의 거동 특성을 화학액의 농도함수로 residual flow procedure(REP)에 연결하였다. RFP와 함께 유한요소법을 이용한 사면안정 해석 프로그램을 개발하여 안전율을 구하였으며 강도정수를 화학용액의 농도함수로 요소방정식에 넣어구한 안전율을 비교하였다. 이로써 화학용액이 흙제방의 안정성에 미치는 영향을 분석하였다.

• Steel and Composite Structures
• /
• 제15권3호
• /
• pp.343-355
• /
• 2013

Shear failure and core concrete crushing at plastic hinge region are the two main failure modes of bridge piers, which can make repair impossible and cause the collapse of bridge. To avoid the two types of failure of pier, a composite pier was proposed, which was formed by embedding high strength concrete filled steel tubular (CFT) column in reinforced concrete (RC) pier. Through cyclic loading tests, the seismic performances of the composite pier were studied. The experimental results show that the CFT column embedded in composite pier can increase the flexural strength, displacement ductility and energy dissipation capacity, and decrease the residual displacement after undergoing large deformation. The analytical analysis is performed to simulate the hysteretic behavior of the composite pier subjected to cyclic loading, and the numerical results agree well with the experimental results. Using the analytical model and time-history analysis method, seismic responses of a continuous girder bridge using composite piers is investigated, and the results show that the bridge using composite piers can resist much stronger earthquake than the bridge using RC piers.

• 소성∙가공
• /
• 제16권7호
• /
• pp.555-560
• /
• 2007

This paper shows some achievements at bending of extruded aluminum profiles during the extrusion process. The conventional process for the production of bent profiles involves a successive extrusion, stretching, and bending of the profiles. Conventional bending methods can not meet demands far precision and cost-effective production in some cases, due to cross sectional deformation, irregular decrease of tube wall thickness and a complication of the process design. An estimation of spring-back required for precision of the bending radius can not always be achieved by the over bending of the profile. Since the profile is hot during the bending process, the spring-back phenomenon can be avoided. This means that an additional bending process is not necessary. Consequently, flexible bending can be achieved with cost reduction and quality improvement. Experimental tests were completed to study the relationship between curvature radius of profile and position of guide on the extrusion for vehicle bumper. A7108 is applied as a billet material in order to increase strength. The overall correlation between the experimental and numerical results is good. It is therefore concluded that the present method provides an efficient means for the constant curvature extrusion process.

• 복합신소재구조학회 논문집
• /
• 제1권2호
• /
• pp.44-50
• /
• 2010

본 연구에서는 노후교량 바닥판 대체용으로 단품(Modular) GFRP 바닥판 구조에 대한 거동분석을 실험을 통행 실시하였다. 그 바닥판의 성능평가로서 축소모형(1/5)의 시험편 3개에 대한 실험적 연구를 수행하였다. 시험편은 박스튜브를 갖는 샌드위치 판이다. 교량바닥판의 구성재료는 유리섬유와 에폭시 레진이다. 모든 시험편에 대한 실험결과로서 최대강도, 강성 및 변형능력으로 나타내었다. 실험적 결과의 타당성을 검증하기 위해 유한요소해석을 하여 비교하였다.