• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.306.1-306
• /
• 2002

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.329-334
• /
• 2008

The purpose of this research is to develop the design, pattern and size system of brief as a measurement garment in order to obtain more precise silhouettes and sizes of the body in 3D measurements. The results of this research are as follows: First, nylon/lycra materials which elasticity is equivalent to 18%(wale) and 27%(course), were selected as a material for briefs to minimize possible error in measurement and deformation of body shape caused by looseness or tightness in its measured parts. And T-back style design was selected, of which briefs neither deform human body nor cause overlapping or excessive tightness when was put on the measurement garment over it. Second, different darts for men and women were adopted into the pattern in consideration for the shape of hip. Third, the waist band of briefs was located between the waistline and abdominal girth line so that it didn't interfere with measurement, and using a wide band of 40mm minimized the tightness of the human body. In addition, the stitch lines and sewing procedure were simplified to minimize the deformation of body shape resulting from inseams and stitch lines. Finally, for the size of briefs, 6 cm intervals were set on the basis of the waist girth and 8 kinds for men and 6 kinds for women were selected in descending order of appearance rate by the interval sections. English T meaning T-back design and numbers representing the waist girth were marked in parallel for the name of size.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.96-102
• /
• 2006

Because of the increasing need to use clayey soil as the backfill in reinforced soil structures and embankment material, nonwoven geotextiles with the drain capability have been receiving much attention. However, there are few studies of the deformation behavior of nonwoven geotextiles at geosynthetics reinforced soil structures in the field because the nonwoven geotextile, which has low tensile stiffness and higher deformability than geogrids and woven geotextiles, is difficult to measure its deformation by strain gauges and to prevent the water from infiltrating. This study proposes a new, more convenient method to measure the deformation behaviour of nonwoven geotextile by using a strain gauge; and examines the availability of the method by conducting laboratory tests and by applying it on two geosynthetics reinforced soil (GRS) walls in the field. A wide-width tensile test conducted under confining pressure of 7kPa showed that the local deformation of nonwoven geotextile measured with strain gauges has a similar pattern to the total deformation measured with LVDT. In the field GRS walls, nonwoven geotextile showed a larger deformation range than the woven geotextile and geogrid; however, the deformation patterns of these three reinforcement materials were similar. The function of strain gauges attached to nonwoven geotextile in the walls works normally for 16 months. Therefore, the method proposed in this study for measuring nonwoven geotextile deformation by using a strain gauge proved useful.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.90-97
• /
• 2001

An electronic speckle pattern interferometry (ESPI) system for measuring tensile properties under micro-tensile testing has been developed. The system consists of an optical system and an image processing system. In the optical system, optical components for measurement of in-plane deformation are arranged on the path of He-Ne laser. In the image processing system, the window-based program for acquiring speckle pattern interferometric image was developed and deformation in a small specimen is continuously evaluated during the test. Using this system, tensile strain of copper foil was measured during tensile testing. Tensile specimen had the thickness and width of 22 and 500 ${\mu}{\textrm}{m}$, respectively. Tensile properties, including the elastic modulus, yielding strength and tensile strength, of the copper were evaluated and also plastic exponent and coefficient in the Ramberg-Osgood relationship were evaluated from the stress-strain curve.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.686-692
• /
• 2013

Today, environmental issues have become a matter of worldwide concern. In particular, automobile industries engage in considerable research and investment to develop high-efficiency and ecofriendly cars. Most ecofriendly cars use natural gas or hydrogen gas instead of fossil fuels. In this regard, low-weight and high-pressure vessels have gradually been developed to increase the driving distance of a car. However, most pressure vessels installed in cars develop many defects over time owing to shocks sustained when the car is being driven. Such defects can cause the explosion of the pressure vessel. Therefore it is important to prevent such explosions due to internal defects. The use of shearography for measuring the internal defects of objects afford many advantages. It is a non-contact and non-destructive method, and it is not limited by the object shape. In this study, the internal defect deformation and strain of an aluminum liner that is used in a CNG bus for the fuel storage tank is measured using shearography. It is important to measure the strain and deformation in order to detect defects and repair the pressure vessel. To verify the accuracy of the shearography measurement method, the measurement results of shearography, out-of-plane ESPI, and FEM are compared quantitatively.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.141-148
• /
• 2019

모바일 기기로 사용되는 전자기판은 여러 가지 다양한 재료로 구성되어 있으며, 제조시나 사용 환경에서 온도가 변하면 각 재료의 열팽창 계수의 차이로 인하여 변형과 응력집중이 발생하게 된다. 그림자 무아레 방법은 비접촉으로 전체 영역에 걸친 면외변위를 측정하는 광학적 방법이지만 고감도 적용을 위해서는 탈봇 현상의 극복이 필요하다. 본 논문에서는 그림자 무아레 기법에서 발생하는 탈봇 현상을 극복하기 위하여 다양한 파장의 LED 광원을 이용하고, 파장의 변화가 탈봇 거리에 미치는 영향에 대해 연구하였다. 위상 이동법을 이용함으로써 10 ㎛/fringe 이내의 측정 감도를 확보할 수 있는 실험방법을 제안하고 이를 평가하였으며, 이 방법을 모바일 회로 기판의 열변형 측정에 적용하였다. 백색광을 사용한 경우에서는 탈봇 현상으로 인하여 측정이 불가능한 영역이 여러 군데 존재하였으나, 파란색 LED 광을 사용한 경우에는 대부분의 영역에서 감도 6.25 ㎛/fringe의 정밀한 무아레 무늬를 얻어낼 수 있음을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제45권8호
• /
• pp.11-16
• /
• 2008

본 논문에서는 먼저 RTP(Rapid Thermal Processor) 장치를 스트레스 측정에 용이한 구조로 제작하고 PC에서 통합 공정관리 시스템을 설계하였다. 다음으로는 Large deformation 이론을 바탕으로 반도체 웨이퍼 표면의 변형검사를 위한 레이져 인터페로미터리를 구성하였다. 궁극적으로 이러한 레이져장치로부터 웨이퍼 표면의 영상을 추출하고 세선화, 블록화 그리고 스트레스 분포도의 순서로 영상처리 하여 스트레스로 인한 웨이퍼 표면의 변형을 검사하였다. 실험을 하기 위해 변형이 이루어지도록 웨이퍼의 후면을 1mm정도 갈아낸 후 약 1000도에서 $3\sim4$회 열처리를 수행하였으며, 열처리를 가한 영상과 가하지 않은 영상을 통하여 웨이퍼 열처리 후 심각한 변형이 이루어졌음을 알 수 있었다.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.189-194
• /
• 2008

본 논문은 광섬유 브래그 격자 센서를 이용한 텐서그리티 구조의 실시간 모니터링을 설명하였다. 텐서그리티 구조는 케이블의 장력만으로 평형을 유지하는 구조시스템이다. 힘의 평형을 이룰 때 케이블 각 부분에 장력은 일정하다 할 수 없다. 그러므로 각 부분의 장력의 계측은 매우 중요하다. 각 부분의 케이블의 장력을 계측하는데 광섬유 브래그 격자 센서가 적합한지를 증명하기 위하여 텐서그리티 시험체를 제작하였다. 광섬유 브래그 격자 센서를 이용하여 장력을 모니터링 하는 시험을 실시하였고, 시험의 결과로 광섬유 브래그 격자 센서는 외력 작용 시에 정확한 계측을 보여주었다. 그러므로 텐서그리티 구조의 케이블에 장력을 계측할 수 있고 실시간 모니터링이 가능하다.

• 한국소음진동공학회논문집
• /
• 제13권2호
• /
• pp.132-143
• /
• 2003

Viscoelastic components for vibration isolation or shock absorption in automobiles, machines and buildings are often subject to a high level of static deformation. From the dynamic design point of view, it is requisite to predict dynamic complex stiffness of viscoelastic components accurately and efficiently. To this end, a systematic procedure for complex modulus measurement of the viscoelastic material under large static deformation is often required in the industrial fields. In this paper, dynamic test conditions and procedures for the viscoelastic material under small oscillatory load superimposed on large static deformation are discussed. Various standard test methods are investigated in order to select an adequate test methodology. The influence of fixed boundary condition in the compression tests upon complex stiffness are investigated and an effective correction technique is proposed. Then the uniaxial tension and compression tests are performed and its results are compared with analysis results from conventional constitutive models.

• 한국측량학회지
• /
• 제22권2호
• /
• pp.127-135
• /
• 2004

근접사진측량에 의한 정밀측정에서는 사용하는 렌즈의 검정, 요구정확도에 따른 촬영계획이 매우 중요하다. 또한 사진측량에 의한 대상물의 절대변위ㆍ변형측량을 위해서는 절대좌표계의 설정이 무엇보다도 중요하다. 본 연구에서는 35mm 측정용 카메라를 이용한 초근접 촬영을 위해 초점거리 21mm의 초광각 렌즈에 대한 렌즈 검정을 실시하였으며, 소규모 영역에 대한 주기적 관측을 통해 절대변화량을 모니터링 할 수 있는 측정시스템을 개발하고, 이 시스템을 일정한 주기로 수중구조물의 표면에 대한 절대변화량 모니터링에 적용함으로서 개발한 시스템의 효율성을 제시하였다.