• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.94-102
• /
• 1996

유한변형문제에서 변형구배텐서를 탄소성 성분으로 분해하기 위한 가산분해와 곱분해방법에 대해서 설명하고, 이 두 방법에서 파생되는 역학량들의 의미와 그 차이점을 보였다. 변형구배에 대한 기존의 곱분해와 가산분해로 얻어지는 변형속도구배는 가산적으로 표현되지 않으며, 소성변형속도구배는 탄성변형의 영향을 받고 있다. 본 연구에서는 공축소성 가정을 도입하고, 수정된 곱분해를 통하여 소성변형속도구배가 탄성변형에 영향을 받지 않는 가산적인 변형속도 구배를 얻었다.

• Journal of Mechanical Science and Technology
• /
• 제20권5호
• /
• pp.621-633
• /
• 2006

To reflect the size effect of material $(1\sim15{\mu}m)$ during plastic deformation of polycrystalline copper, a constitutive equation which includes the strain gradient plasticity theory and intrinsic material length model is coupled with the finite element analysis and applied to plane strain deformation problem. The method of least square has been used to calculate the strain gradient at each element during deformation and the effect of distributed force on the strain gradient is investigated as well. It shows when material size is less than the intrinsic material length $(1.54{\mu}m)$, its deformation behavior is quite different compared with that computed from the conventional plasticity. The generation of strain gradient is greatly suppressed, but it appears again as the material size increases. Results also reveal that the strain gradient leads to deformation hardening. The distributed force plays a role to amplify the strain gradient distribution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.413-417
• /
• 2004

Recent experiments have shown the 'size effects' in micro/nano scale. But the classical plasticity theories can not predict these size dependent deformation behaviors because their constitutive models have no characteristic material length scale. The Mechanism - based Strain Gradient(MSG) plasticity is proposed to analyze the non-uniform deformation behavior in micro/nano scale. The MSG plasticity is a multi-scale analysis connecting macro-scale deformation of the Statistically Stored Dislocation(SSD) and Geometrically Necessary Dislocation(GND) to the meso-scale deformation using the strain gradient. In this research we present a study of nano-indentation by the MSG plasticity. Using W. D. Nix and H. Gao s model, the analytic solution(including depth dependence of hardness) is obtained for the nano indentation , and furthermore it validated by the experiments.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2078-2086
• /
• 2003

As technology advances with development of new materials, it is important to measure the thermal diffusivity of material and to predict the heat transfer in the solid subject to thermal processes. The measurement of thermal properties can be done in a non-contact way using photothermal displacement spectroscopy. In this work, the thermal diffusivity was measured by analyzing the magnitude and phase of deformation gradient. We proposed a new data analysis method based on the real part of deformation gradient as the pump-probe offset value. As the result, compared with the literature value, the measured thermal diffusivities of materials showed about 3 % error.

• Steel and Composite Structures
• /
• 제32권2호
• /
• pp.157-171
• /
• 2019

In this research, the dynamic instability region (DIR) of the sandwich nano-beams are investigated based on nonlocal strain gradient elasticity theory (NSGET) and various higher order shear deformation beam theories (HSDBTs). The sandwich piezoelectric nano-beam is including a homogenous core and face-sheets reinforced with functionally graded (FG) carbon nanotubes (CNTs). In present study, three patterns of CNTs are employed in order to reinforce the top and bottom face-sheets of the beam. In addition, different higher-order shear deformation beam theories such as trigonometric shear deformation beam theory (TSDBT), exponential shear deformation beam theory (ESDBT), hyperbolic shear deformation beam theory (HSDBT), and Aydogdu shear deformation beam theory (ASDBT) are considered to extract the governing equations for different boundary conditions. The beam is subjected to thermal and electrical loads while is resting on Visco-Pasternak foundation. Hamilton principle is used to derive the governing equations of motion based on various shear deformation theories. In order to analysis of the dynamic instability behaviors, the linear governing equations of motion are solved using differential quadrature method (DQM). After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as various shear deformation theories, nonlocal parameter, strain gradient parameter, the volume fraction of the CNTs, various distributions of the CNTs, different boundary conditions, dimensionless geometric parameters, Visco-Pasternak foundation parameters, applied voltage and temperature change on the dynamic instability characteristics of sandwich piezoelectric nano-beam.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.528-535
• /
• 2011

본 논문에서는 변형율 독립 탄-소성 구성방정식을 이용, 전단 변형 하에서의 국부적 소성변형 집중현상이 분석되었다. 또한 변형량 기울기 (strain gradient) 항이 포함된 비구역적 (non-local) 구성방정식이 유도되었으며 이는 다시 이중후방응력 경화 모델로 표현되었다. 더욱이 본 모델은 연속체 파손역학과 조합되었다. 국부적 변형집중 현상은 수치해석을 통해 분석되었으며 변형량 기울기 항이 구성방정식에 포함될 때 본 항의 크기가 증가할수록 전단 밴드의 크기는 감소하는 것으로 밝혀졌다.

• 대한의용생체공학회:의공학회지
• /
• 제16권2호
• /
• pp.149-156
• /
• 1995

동맥전단부를 연구할수있는 새로운 실험방법과 기계역학적 분석방법을 제시하였다. 지금까지동맥역학적 연구는 대부분이 동맥의 길이방향과 원주방향에 대한것이 이였다. 두께방향의 변형은 포아손비라든지 비압축성가정으로 이론적으로 결정되었다. 또한 두께에 걸친 변형의 변화도 무시되었다. 그러나 병리학적인 의미에서 동맥의 두께에 걸친 변형도와 변형의 분포는 중요한 의미를 가진다. 그러므로 본연구에서 제안된 실험방법과 장치는 두께전반에 걸친 변형을 측정할수 있게 했다. 또한 전단부의 부위별 변형도의 관찰이 가능하고 병리적인 동맥경화증에 대한 현상과 역학적현상을 상관시킬 수 있음에 중요한 의미를 들 수 있다.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.372-380
• /
• 2012

The optical method Digital Speckle Correlation Measurement (DSCM) has been extensively applied due its capability to measure the entire displacement field over a body surface. A formula of displacement measurement errors by the gradient-based DSCM method was derived. The errors were found to explicitly relate to the image grayscale errors consisting of sub-pixel interpolation algorithm errors, image noise, and subset deformation mismatch at each point of the subset. A power-law dependence of the standard deviation of displacement measurement errors on the subset size was established when the subset deformation was rigid body translation and random image noise was dominant and it was confirmed by both the numerical and experimental results. In a gradient-based algorithm the basic assumption is rigid body translation of the interrogated subsets, however, this is in contradiction to the real circumstances where strains exist. Numerical and experimental results also indicated that, subset shape function mismatch was dominant when the order of the assumed subset shape function was lower than that of the actual subset deformation field and the power-law dependence clearly broke down. The power-law relationship further leads to a simple criterion for choosing a suitable subset size, image quality, sub-pixel algorithm, and subset shape function for DSCM.

• 소성∙가공
• /
• 제15권8호
• /
• pp.591-596
• /
• 2006

Torsion testing was employed to investigate the deformation and recrystallization behavior of coarse-grained Alloy 718, and the results are compared with the compression testing results. Mechanical testing was conducted on bulk Alloy718 samples within the temperature ranges, $1000^{\circ}C{\sim}1100^{\circ}C$. The strain gradient formed in the torsion specimens resulted in a recrystallization behavior which varied along the radial direction from the center to the surface. The flow curves based on effective stress and effective strain as obtained by Fields and Backofen's isotropic deformation theory and the dynamic recrystallization within the compression tested samples and torsion tested samples are different. The different deformation and recrystallization behavior can be rationalized by the fact that the deformation in the coarse-grained torsion specimens is not uniform and thus the strain gradient within the specimens cannot be analytically predicted by FE simulation. Thus, the extent of recrystallization cannot be properly predicted by the established recrystallization equations based on compression tests.

• 소성∙가공
• /
• 제3권2호
• /
• pp.229-242
• /
• 1994

An approximate procedure based on a combination micro-macroscopic theories of plasticity for predicting the crystallographic texture during the plane strain forming of fcc metals has been developed. This procedure is divided into two steps. Firstly, we extract the history of the deformation gradient at all deformed elements with a elasto-plastic finite element method using isotropic plasticity model. Secondly, we use this deformation gradient history to predict the crystallographic deformation texture based on the Bishop-Hill theory. Renouard and Wintenberger' method is chosen for selecting the active slip systems. The predicted results have been compared with reported experimental results. The calculated results are in good agreement with their results.