• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.62-69
• /
• 2022

EHA (Electro-Hydrostatic Actuator) is more energy efficiency than a centralized hydraulic system. In particular, the EHA used for aircraft has a redundant design in preparation for failure scenario. Also, due to the aircraft's internal space limitation, the actuator's length must be optimized. Therefore, a series configuration of double rod and single rod cylinder is advantageous. However, due to the asymmetry of the cross-sectional area of the piston, the force fighting phenomenon between the two cylinder areas occurs during redundant operation with a general control system. In this paper, the force fighting phenomenon of redundant EHA was simulated. A controller with load compensation and a force control-based position controller as a method to suppress its stimulation

• Composites Research
• /
• v.36 no.1
• /
• pp.16-24
• /
• 2023

This paper presents a multi-scale progressive fatigue damage model incorporating the model for interfacial debonding between fibers and matrix. The micromechanics model for the progressive interface debonding was adopted, which defined the four different interface phases: (1) perfectly bonded fibers; (2) mild imperfect interface; (3) severe imperfect interface; and (4) completely debonded fibers. As the number of cycles increases, the progressive transition from the perfectly bonded state to the completely debonded fiber state occurs. Eshelby's tensor for each imperfect state is calculated by the linear spring model for a damaged interface, and effective elastic properties are obtained using the multi-phase homogenization method. The fatigue damage evolution formulas for fiber, matrix and interface were proposed to demonstrate the fatigue behavior of CFRP laminates under cyclic loading. The material parameters for the fiber/matrix fatigue damage were characterized using the chaotic firefly algorithm. The model was implemented into the UMAT subroutine of ABAQUS, and successfully validated with flat-bar UD laminate specimens ([0]₈,[90]₈, [30]₁₆) of AS4/3501-6 graphite/epoxy composite.

• Journal of Korea Trade
• /
• v.27 no.3
• /
• pp.21-42
• /
• 2023

Purpose - This paper investigates the trade effect of the Korea-China Free Trade Agreement (KCFTA) which coincides with political conflicts between the two countries due to the deployment of the Terminal High Altitude Area Defense (THAAD) in Korea. The two events occurred in the same year and both are likely to affect trade between two countries but in opposite directions. Therefore, it is crucial to distinguish between the trade effects from the KCFTA event and those from the THAAD event to evaluate the true FTA effects. However, this would be difficult when using only annual data. Accordingly, ex post studies to examine the trade effects of KCFTA are lacking in trustworthiness while many ex ante studies that conjecture the positive trade effects neglect the THAAD deployment impact. This paper aims to fill that gap. Design/methodology - Given that the KCFTA and THAAD events occurred in the same year but in different months, we use the monthly data from 2000 to 2019 of Korea's exports to bracket this period. We employ the difference-in-difference (DID) method within a gravity equation specification that uses hi-dimensional fixed effects to address various endogeneity issues and seasonal effects. We identify the net impact of KCFTA ratification from these two near-simultaneous events to quantify the effects of trade liberalization between these two countries. Findings - After isolating the THAAD effects on trade, the analysis creates a positive and statistically significant coefficient estimate of the KCFTA impact. In contrast, failing to isolate the THAAD effect produced a negative and statistically significant coefficient estimate of the KCFTA impact. Our results indicate that KCFTA independently increased Korea's exports to China by 10.2%, but that this increase was fully mitigated by the THAAD event. Further, our results verify that unobserved heterogeneity and multilateral resistance are technically difficult to account for in those estimations as that rely solely upon annual data, as this type of data are inadequate to control for the potential for endogeneity. Originality/value - This paper is one of the first studies to carefully evaluate the net trade effects of the KCFTA on Korea's largest trading partner while isolating the impact of simultaneously occurred political events that may influence trade in opposing directions. Our findings indicate that the lack of prior evidence of positive trade effects of the KCFTA when using annual data may be attributed to a failure to identify the impact of each event separately. This analysis supports using the correct modeling specification to avoid misleading conclusions when evaluating any important international trade policy.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.270-279
• /
• 2023

Purpose: The purpose of this study is to examine the new drugs that recently have shown rapid increase and provide solutions to eradicate them. Method: This study used the relevant preceding studies, statistics, and overseas materials to identify the new drug problems and suggest solutions. Result: Compared to the past, the numbers of criminals detected for the administration, distribution, and production of drugs are rapidly increasing. According to the statistical data on drugs in 2021, the number of drug-related cases decreased compared to the previous year. However, there are concerns because the amount of detected drugs increased more than three times, and the age group of drugrelated criminals are getting younger. Such results are largely affected by the spread of new drugs. In particular, it is deemed to be affected by the spread of new drugs, such as fentanyl, yaba, khat, kratom, etc., as well as the new psychoactive drugs and hemp-related materials. Conclusion: In response to spread of new drugs, this study suggests simplifying the temporary classification of drugs, enforcing control of foreign drug users, strengthening the cooperation with relevant institutions, such as Korea Customs Service and the Ministry of Food and Drug Safety, and intensifying the punishment on the drug users in order to strengthen the countermeasure against the new drugs.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.2
• /
• pp.93-103
• /
• 2023

Warships widely spread numerous chaffs using a blast, which form chaff clouds that create false radar cross-sections to deceive enemy radars. In this study, we established a numerical framework based on a one-way coupling of computational fluid dynamics and discrete element method to simulate the spatiotemporal distribution of chaff clouds for warships in the air. Using the framework, we investigated the effects of wind, initial chaff cartridge angle, and blast pressure on the distribution of chaff clouds. We observed three phases for the chaff cloud diffusion: radial diffusion by the explosion, omnidirectional diffusion by turbulence and collision, and gravity-induced diffusion by the difference in the fall speed. The wind moved the average position of the chaff clouds, and the diffusion due to drag force did not occur. The direction of radial diffusion by the explosion depended on the initial angle of the cartridge, and a more vertical angle led to a wider distribution of the chaffs. As the blast pressure increased, the chaff clouds spread out more widely, but the distribution difference in the direction of gravity was not significant.

• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.157-171
• /
• 2022

Electrical resistivity tomography (ERT) is a traditional and representative geophysical method for determining the resistivity distributions of surrounding soil and rock volumes. Depth resolution profiles and sensitivity distribution sections of the resistivities with respect to various electrode configurations are calculated and investigated using numerical model data. Shallow vertical resolution decreases in the order of Wenner, Schlumberger, and dipole-dipole arrays. A high investigable depth in homogeneous medium is calculated to be 0.11-0.19 times the active electrode spacing, but is counterbalanced by a low vertical resolution. For the application of ERT depth resolution profiles and sensitivity distributions, we provide subsurface structure models for two types of land-creping failure (planar and curved), subvertical fracture, and weathered layer over felsic and mafic igneous rocks. The dipole-dipole configuration appears to be most effective for mapping land-creeping failure planes (especially for curved planes), whereas the Wenner array gives the best resolution of soil horizons and shallow structures in the weathered zone.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.124-133
• /
• 2023

Preservation processing for two combat boots was executed through application of 3-dimensional digital technology and with use of preservation materials providing outstanding reversibility and stability. The aim of this was to establish a method to preserve the relics of fallen Korean War soldiers that had been excavated by the soldiers remains excavation corps of the Ministry of National Defense. It was possible to estimate the foot size of the soldiers who would have worn the combat boots via 3-dimensional digital scanning and modeling of the boots. In this process, the original form of the combat boots was restored through the use of 3D-printed structures. The original form was restored through a process of removing contaminants from the excavated relics and performing a conditioning treatment, and through use of an antique-color treatment after bonding and filling in the sections that had been ripped or deteriorated. Following the aforementioned preservation processes, it was possible to confirm that both of the combat boots had soles and top sections made of rubber, and portions of the top section and ankle section of the boots were made of synthetic rubber. As such, it was confirmed that these were similar to the Shoe Pac(M-1944, 12-inch) winter boots that had been manufactured for the purposes of waterproofing and/or protection against cold, and introduced in 1944. Such results confirmed that it is possible to discover the manufacturing techniques, materials, and uses of relics excavated through application of preservation processing, thereby illustrating the importance of the convergent research of scientific preservation processing and 3-dimensional digital technology.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.222-228
• /
• 2008

On living skin the chances of a successfully developing latent fingerprint are very limited. This is due to the fact that continual perspiration and rapid absorption diffuse into the lipophillic layer on skin. A study was conducted to investigate effectively developing method of latent fingerprints on human skin surfaces and pig skin likely corpse's skin. We used commercial fingerprint powder, black powders, black magnetic powder, fluorescence magnetic powder, Cyanoacrylate fuming (CA) and direct lifting methods (lifting paper, glasses and photo glossy paper). Developing of fresh fingerprints on living skin was achieved with S-powderblack, CA fuming and CA fuming following S-powder, fluorescence powder. The other powder tends to overwhelm the latent print and the background. But, latent fingerprint residue was disappeared with time after deposit on a living surface. In case of pig skin likely corpse's skin, latent fingerprint detection was achieved with CA fuming following S-powder and deposited print during 6 hr at $25^{\circ}C$, 40% relative moisture yielded excellent fingerprints with clear ridge details using 1 min CA fuming. And enhancement of fingerprint detection image using forensic light source was achieved.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.202-202
• /
• 2022

Recently days, soybean production in paddy field is increasing, from 4,422 ha in 2016 to 10,658 ha in 2021 in Korea. It is easy for Phytophthora stem and root rot (PSR) occurring in paddy field condition, when it is poorly drained soils with a high clay content, and temporary flooding and ponding. Therefore PSR resistant soybean cultivar is required. The objective of this study is to identify QTL region and candidate genes relating to PSR resistance of the race in main soybean cultivation area in Korea. 210 soybean materials including cultivars and germplasm were used for inoculation and genome-wide association study (GWAS). Inoculation was conducted using stem-scar method with 2 replications in 2-year for the race 3053 from Kimje and 3617 from Andong. 210 materials were genotyped with Soya SNP 180K chip, and structure analysis and association mapping were conducted with QTLMAX V2. The results of inoculation showed that survival ratio ranged from 0% to 96.7% and mean 9.7% for 3053 and ranged from 0% to 100% and mean 7.6% for 3617. Structure analysis showed linkage disequillibrium (LD) was decayed below r²=0.5 at 335kb of SNP distance. Significant SNPs (LOD>7.0) were identified in Chr 1, 2, 3, 4, 5, 11, 14, 15 for 3053 and Chr 1, 2, 3, 7, 10, 14 for 3617. Especially, LD blocks (AX-90455181;15,056,628bp~AX-90475572;15,298,872bp) in Chr 2 for 3053 and 3067 were duplicated. 29 genes were identified on these genetic regions including Glyma.02gl47000 relating to ribosome recycling factor and defense response to fungus in Soybase.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1075-1084
• /
• 2023

Satellite-derived data is collected by observing the Earth and is used in various fields such as national defense, natural disasters, location-based services, infrastructure, environment, energy, marine, and insurance. This study aims to present the virtuous cycle structure of the satellite information data industry and the business ecosystem model of the industry. As a research method, cases were collected and categorized from the following areas: literature, online, application, and content. The results show that the ecosystem model of the satellite information data industry provides an approach to content services in public and commercial areas, and develops various algorithmic technologies to facilitate content production and services at the level of complex general-purpose technologies. Second, in terms of content typology, satellite information data can be subdivided into monitoring content, urban space monitoring content, and satellite information content. Third, the consumption value of satellite content could be subdivided into informational value, environmental, social and governance (ESG) value, educational value, and content value. In order to expand the global content market, Korea will need to focus on creating an ecosystem for the satellite information industry and discovering differentiated content. It will also need to increase the popularization and accessibility of data to the general public and promote the Korean K-Satellite Information Data Industry ecosystem through government support, policy efforts, and policies such as establishing legal systems, increasing investment, and training human resources.