• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.662-668
• /
• 2016

Defense specification suitability review task means to examine whether to need enactment, amendment or abolition of defense specification, and realistic and efficient review environment are urgently needed by improving system. For the promotion of efficient tasks, the cycle of defense specification suitability review needs to be changed to 5 years for active specifications and 10 years for inactive specifications. To simplify the standards of defense specification suitability review, the distinction between prior management items and general management items should be abolished and the number of review items need to be reduced from ten to three. Also, in order to promote substantial defense specification suitability review, a system improvement is needed to utilize retired professionals from defense acquisition related agencies.

• 품질경영학회지
• /
• 제49권3호
• /
• pp.269-279
• /
• 2021

Purpose: The purpose of this study was to suggest weapon system specifications for requirements of Condition-Based Maintenance(CBM/CBM⁺). Methods: The military documents and case studies with regard to condition-based maintenance were reviewed. Representative Korea defense specifications of weapon system such as an aircraft, a C4ISR etc. were analyzed and investigated the level of requirement for maintainability was. Results: Condition-based maintenance was defined in both U.S. instruction and Korean directive. While deparment of defense(U.S.) provide a guidebook for CBM⁺, detailed instruction was not sufficient for Korean. Ministry of national defense(ROK) define the CBM⁺ by means of IPS element which should be developed along with the system development. The maintainability was barely included in Korean defense specifications, except for BIT(Built-in test) function. As a first step for defining the condition-based maintenance requirement in defense specification, this study suggests a standard form for data needed to acquire according to types of system, fault, failure, and so on. Conclusion: The empirical researches on CMB/CBM⁺ with domestic weapon systems are not enough, and a logic which leads the maintenance strategy to CMB/CBM⁺ is not solved. Through technical researches and institutional improvements including this study, we hope that condition-based maintenance would be fully established in the Korean defense field.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.81-86
• /
• 2014

Systems Engineering application focused on requirement definition and management for SURION System Development Project is described in this paper. To perform the development process effectively based on systems engineering processes; Requirements Definition, Design Review, Configuration Management, Quality Assurance, Data Management, are applied in this project. In this processes, the Stakeholder's Requirements are transferred to Specifications verified with design reviews, prototyping inspections, and integration tests. All engineering data, especially verification plan & results are recorded, and traced to each requirements of system specification in Surion database. Therefore, it could be assured that all requirements of specification are evaluated and verified successfully in Surion Project.

• 한국국방경영분석학회지
• /
• 제33권1호
• /
• pp.135-155
• /
• 2007

성능형 규격이란 재료, 공정 등의 구체적인 사양에 대한 명시가 없이 최종적인 요구성능, 환경 및 연동되는 부분의 호환성 확보에 대한 규제만을 함으로써 우수한 민수기술의 도입을 통하여 경제적이고 높은 신뢰성을 달성하고자 활용되는 규격으로 이미 선진국에서는 많이 작성되어지고 기존의 상세형 규격의 성능형 규격 전환도 활성화되고 있는 실정이다. 그러나 우리나라의 경우 규격 작성시 성능형으로 작성토록 규정화하고 성능형 규격 작성지침을 마련하는 등 성능형 규격 작성의 활성화에 많은 노력을 기울이고 있으나 현재까지의 작성 및 활용 실적을 보면 매우 미흡한 실정이다. 따라서 성능형 규격의 효과적인 작성/전환을 위하여 시장조사 방안, 무기체계개발 또는 부품국산화에 따른 성능형 규격 작성 방안, 성능형 규격 전환 방안, 성능형 규격 전환을 위한 절차와 방법, 성능형 규격과 상세형 규격의 혼합형태 활용을 제시하였다.

• 품질경영학회지
• /
• 제41권3호
• /
• pp.443-456
• /
• 2013

Purpose: Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat boots defects and 40mm ammunition explosion accident. To address these problems, this paper suggests to use so called, Defense Quality Score, which is based on Taguchi loss function and developed in this research. Methods: Current defense specification states only the minimum requirement to produce the military supplies. Therefore, it is not easy to indue the continuous quality improvement of the supplies. This research suggests to use the defense quality score which measures the current status of defense supplies'quality characteristics. Results: We applied the defense quality score concept into the hot pepper sauce and long time stockpiled ammunition. We first categorize the quality characteristics into three categories, then assign the certain amount of score based on the importance of the characteristics. Lastly, we applied the modified Taguchi loss function to calculate the achieved score of the characteristics. The perfect score is 100 and the closer to the score, the better product it indicates. Conclusions: In this research, we developed the modified Taguchi loss function to apply into the korean defense supplies. The loss function is utilized to calculate the achieved level of satisfaction of the supplies based on the defense specifications. The application of defense quality score may help to stimulate the continuous quality improvement and encourage the good will quality competition among the military providers.

• 한국항행학회논문지
• /
• 제22권5호
• /
• pp.351-358
• /
• 2018

본 연구에서는 개발된 모터 조립체의 누설 잡음신호 감쇠 방안을 시험을 통해 제안한다. 개발된 장치는 항공기 외부에 장착되어 안테나를 회전시키기 위한 장치로서 전자기 간섭 측면에서 MIL-STD-461F의 RE102 요구규격을 충족해야한다. RE102 시험결과를 통해 장치의 누설 잡음신호가 전원 및 제어 케이블을 통한 외부 유입과 모터 회전에 의해 발생됨을 확인하였다. 그리고 회전을 위해 내 외부의 물리적 차폐가 어려운 부분에서 잡음신호가 누설됨을 확인하였다. 누설 잡음신호에 대한 감쇠를 위해 장치 동작을 고려한 전기적 접지 보강, 전기적 차폐 구조를 적용하여 시험을 수행했고 규격 충족 여부를 확인하였다. 최종적으로 잡음누설 경로에 맞물리는 형태를 갖는 원형 주름 초크 구조와 전도성 그리스를 함께 적용하여 요구규격을 충족함을 확인하였다.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.53-64
• /
• 1995

A study was made to characterize the microstructures and mechanical properties of the base metal and the heat-affected zone(HAZ) in Cu-bearing HSLA-100 steel. The Gleeble thermal/mechanical simulator was used to simulated the weld HAZ. The relationship between microstructure and toughness of HAZ was studied by impact test, O. M, SEM, TEM, and DSC. The toughness requirement of military specification value was met in all test temperatures for the base metal. The decrease of HAZ toughness comparing to base plate is ascribed to the coarsed-grain and the formation of bainite. Obliquely sectioned Charpy specimens show that secondary crack propagate easily along bainite lath. Improved toughness(240J) at HAZ of $Tp_2=950^{\circ}C$ is due to the fine grain, and reasonable toughness(160~00J) in the intercritical reheated HZA is achieved by the addition of small amount of carbon which affects the formation of "M-A". Cu precipitated during ageing for increasing the strength of base metal is dissolved during single thermal cycle to $1,350^{\circ}C$ and is precipitated little on cooling and heating during subsequent weld thermal cycle. Thus, the decrease of toughness does not occur owing to the precipitation of Cu.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.249-259
• /
• 2010

국방 모델링 및 시뮬레이션 분야에서 사용되는 다양한 기관, 다양한 출처의 합성환경 자료들은 현재 분산된 환경에서 각각의 원시 데이터베이스를 활용하여 운용, 관리되고 있다. 그러나 HLA/RTI 기술을 통한 모의 체계간의 연동에서 이러한 다양한 합성환경 데이터를 효율적으로 관리하고 교환하기 위해서는 원시 데이터베이스간의 데이터 교환 역할을 수행할 수 있는 중립 합성환경 모델이 필요하다. 이러한 목적으로 DMSO의 지원을 통해 개발된 SEDRIS(Synthetic Environment Data Representation and Interchange Specification)는 손실 없는 데이터의 표현, 교환과 상호운용성을 보장한다. 본 논문에서는 SEDRIS를 국내 차세대 국방 모델링 및 시뮬레이션 환경에서 활용하기 위하여 수행된 기초 연구와 검증을 위한 가시화, 테스트베드를 통한 데이터 교환 실험에 대한 수행 사례와 그 결과를 소개하고, 표준화된 SEDRIS 사용 방안을 제안하고자 한다.

• Composites Research
• /
• 제31권3호
• /
• pp.104-110
• /
• 2018

본 연구에서 수직축 풍력 발전기의 복합재 블레이드 및 타워에 대한 구조 설계 및 해석 방안을 제시하였다. 본 연구에서 수직축 블레이드의 설계 및 제작 수행 후 풍력 발전기 타워의 구조 설계를 수행하였다. 먼저 블레이드와 타워의 설계 요구 조건 및 사양이 정립되었다. 타워 구조 설계 이후 유한 요소 해석을 통하여 타워의 구조 해석을 수행하였다. 적용된 하중에서 응력, 변형, 고유 진동수 해석이 수행되었다. 구조 해석을 통해 타워 형상의 개선 설계 방안을 제시하였다. 최종 설계된 타워 구조는 구조 해석을 통해 안전한 것으로 확인되었다.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.51-58
• /
• 2016

In this paper, we present some results on No-failure accelerated life test of aerial vehicle for reliability demonstration. The design of general accelerated life test consists of the three phases: 1) Estimating normal life test time of a single product from Weibull distribution model; 2) Determining the acceleration factor (AF) by utilizing the relation between the life of mechanical components and the applied torque; 3) Calculating the accelerated life test time, which comes from dividing the estimated normal life test time into AF. Then, we applied the calculated life test time to the real reliability test of the flap actuating system, while considering the requirement specification for mechanical components and operating environment of the actuation system. Real experimental processes and results are presented to validate the theory.