• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.155-155
• /
• 2022

Low head, ogee spillways is popularly used to defense against floods as well as to provide water for irrigation. Spillway is also used to assess compliance with water quality regulations by controlling amount of discharge to the downstream of a channel. For the purpose of water resource management and/or environmental aspects as explained above, the flow discharge through spillways need to be correctly rated as a function of geometry and hydraulic variables. Typically, four flow conditions are encountered during the operation of spillway: (a) uncontrolled free flow (UF); (b) uncontrolled submerged flow (US); controlled free flow (CF); and controlled submerged flow (CS), and each condition has a unique rating equation. However, one of the tricky part of the spillway operation is finding correct flow type over the spillway because structures can operate under both submerged and free flow conditions, and the types are continuously changing over time depending on the amount of discharge, head water and tail water elevation. Quite obviously, if the wrong rating curve relationship is applied because of misjudgment of the flow type due to a transition, a serious error can occur. Thus, an hydraulic model study of one of spillway structure located in South Florida was conducted for the purpose of developing transition relationships. In this presentation, US to UF transition is highlighted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.102-109
• /
• 2019

This paper describes the design of the circuit card assembly to eliminate the communication error on a servo control unit installed in the automated resupply vehicle K56. K56 is a weapon system that automates the supply and loading of ammunition on the K-55A1 self-propelled artillery. As the core item responsible for ammunition movement control, the servo control unit is required to have good communication stability and reliability, but the conventional unit has recognized a problem that communication error intermittently occurs, resulting in an emergency stop phenomenon. We analyzed the communication signal of the servo control unit and identified the failure cause of the circuit card assembly to solve this problem. In addition, the signal interference in data/address line of the circuit card assembly was confirmed through analysis of the failure cause, and redesigned to avoid the interference, such as adjustment of the distance between communication lines and position change. Finally, the proposed cause analysis and redesign were verified through the component of servo control unit and attachment test on K56. We expected these study results to be used as reference for the design of other similar items.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1125-1132
• /
• 2023

The importance of networks is gradually expanding in the battlefield environment. As time goes by, the types of tactical data links used in the Korean JTDLS are increasing, and the military's weapon systems equipped with tactical data link systems are increasing. Thorough quality verification is required to provide stable software to the wider battlefield. This study examines how to prepare an environment in which various simulation tests to verify the stability of the Korean JTDLS project can be conducted as diverse as possible using minimal physical space and Hardware resources. Through this, it is possible to improve the completeness of the project and secure the stability of the program, and it is intended to contribute to securing higher stability and reliability by securing maximum test capabilities in a limited test environment even in Linux based system project of a similar environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.681-691
• /
• 2017

In the clutter environment, it is necessary to update the target tracking filter by detecting the target signal among many measured value data obtained via the radar system, the track does not diverge, and tracking performance is maintained. The method of associating the measurement most relevant to the target track among numerous measurement values is referred to as data association. PSNF and PSNF-m are data association methods of SN-series. In this paper, we provide an IPSNF-m(Integrated Probabilistic Strongest Neighbor Filter-m) algorithm with a track management method based on the track existence probability in PSNF-m algorithm. This algorithm considers not only the presence of the target but also the case where the target is present but not detected. Calculating the probability of each caseenables efficient management. In order to verify the performance of the proposed IPSNF-m, the track existence probability of the IPSNF algorithm applying the track management technique to PSNF, which is known to have similar performance to PSNF-m, is derived. Through simulation in the same environment, we compare and analyze the proposed algorithm with RMSE, Confirmed True Track, and Track Existence Probability that show better performance in terms of track retention and estimation than the existing PSNF-m and IPSNF algorithms.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.335-344
• /
• 2014

The safety case program has been prepared for the development of the disposal facility of low- and intermediate-level radioactive waste in Korea. For the development of the radioactive waste disposal facility, this program can be applied for the safety demonstration of the facility and for the safety judgment of development step based on the international standards and domestic development environment. Systematic safety approach of this program includes the safety strategies such as optimization, robustness, demonstrability and defense-in-depth principle which are based on the safety principle and objectives. From the quality of assessment basis, safety arguments focused on the uncertainty management and the confidence building can assure the disposal safety during the step-wise safety assessment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.357-362
• /
• 2020

The TMFT, a sub-system of TINC, provides voice calls, data transmission and reception, and multimedia services to individual users. At the time of development in 2011, the power circuit of the TMFT was designed to electrical power supply to each device via a charger IC. However, the newly improved power supply circuit allows power to be supplied to each device through the PMIC without configuring the charger IC separately. In this paper, the power circuit design structure of TMFT applied in the development stage and the improved power circuit design structure were compared. And we verified through experiments whether the improved power circuit can be applied to TMFT. The experimental method was verified by directly comparing the current consumption test, charge time comparison test, and rising temperature test during charging each of before and after improvement terminals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1744-1751
• /
• 2011

The concept of the advanced concept technology demonstration (ACTD) has previously been introduced in USA in order to make it possible to rapidly transfer advanced technologies developed in commercial sectors to develop weapon systems in the defense area. Since then in Korea several ACTD programs have been developed and being carried out However, there are few program management methods suitable for the characteristics of the ACTD programs, which requires stringent management of the program requirements and risks due to the radically shortened development time. In this paper such a problem has been addressed and as a solution approach the quality function deployment (QFD) method has been adopted, which is being served as a successful model in various areas such as manufacturing. The QFD method is used in our study to improve communication between various stakeholders involved in the ACTD programs and also to reduce risks related to requirements. Specifically we have developed the ACTD standard templates based on the QFD method and discussed how to use the developed templates. Finally, the application of the study result is demonstrated through the ACTD program of flight information demonstration system and also specific ways are suggested to use the standard templates, to manage requirements, and to reduce risks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.76-84
• /
• 2021

The quality assurance activities can detect the factors that affect the quality based on risk identification in the course of mass production. Risk identification is conducted with risk analysis, and the risk analysis method for the rotorcraft landing system is selected by failure mode effects analysis (FMEA). FMEA is a method that detects the factors that can affect the product quality by combining severity, occurrence, and detectability. The results of FMEA were prioritized using the risk priority number. On the other hand, these methods have certain shortcomings because the severity, occurrence, detectability are weighted equally. Dempster-Shafer evidence theory can conduct uncertainty analysis for the opinions with personal reflections and subjectivity. Based on the theory, the belief function and the plausibility function can be formed. Moreover, the functions can be utilized to evaluate the belief rate and credibility. The system is exposed to impact during take-off and landing. Therefore, experts should manage failure modes in the course of mass production. In this paper, FMEA based on the Dempster-Shafer evidence theory is discussed to perform risk analysis regarding the failure mode of the rotorcraft landing system. The failure priority was evaluated depending on the factor values. The results were derived using belief and plausibility function graphs.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.147-153
• /
• 2011

In this paper, we present a new video management technique using forward timeline to efficiently store and delete the videos on a local server. The proposed method is based on capturing the changing preference of the videos according to recentness, frequency, and playback length of the requested videos. For this purpose, we utilize the forward timeline which represents the time area within a number of predefined intervals. The local server periodically measures time popularity and request segment of all videos. Based on the measured data, time popularity and request segment, the local server calculates the mean time popularity and mean request segment of a video using forward timeline. Using mean time popularity and mean request segment of video, we estimate the ranking and allocated storage space of a video. The ranking represents the priority of deletion when the storage area of local server is running out of space and the allocated storage space means the maximum size of storage space to be allocated to a video. In addition, we propose an efficient storage space partitioning technique in order to stably store videos and present a time based free-up storage space technique using the expected variation of video data in order for avoiding the overflow on a local server in advance. The simulation results show that the proposed method performs better than other methods in terms of hit rate and number of deletion. Therefore, our video management technique for local server provides the lowest user start-up latency and the highest bandwidth saving significantly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.14-22
• /
• 2016

Because fuses have many parts, human error can occur during visual inspections. This paper proposes an automatic ammunition test algorithm for preventing human error during an inspection. The automatic ammunition test algorithm consists of the following three steps. First, the image input and preprocessing step is where an inspection image is rotated using an image rotation algorithm and the image is converted to a binary image. Second, the inspection step of arming determines if the ammunition is armed using Masked Template Matching algorithm, etc. Third, the inspection step of the parts determines if the parts are omitted using an image searching algorithm, etc. The arming or parts omission of the fuse are detected efficiently using the ammunition automatic test algorithm. The ammunition automatic test algorithm is expected to help improve the safety and reliability of 40 mm grenade fuse.