• Journal of Aerospace System Engineering
• /
• v.11 no.4
• /
• pp.15-21
• /
• 2017

In this study, the surface heat transfer coefficient of the 3D model of a thruster regulator in the high temperature and high pressure environment was estimated using the commercial CFD code. The thermal barrier coating (TBC) on the surface of the thruster regulator was modeled and the effect of the thickness of the TBC on the temperature of the thruster regulator was investigated. The thickness of the TBC was varied from $100{\mu}m$ to $500{\mu}m$. Results showed that the temperature of the surface and the inside the thruster regulator was lower for the thicker TBC case.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1029-1035
• /
• 2020

The detector suffers from pulse pileup by overlapping of the signals when it was used in high radiation fields. The pulse pileup deteriorates the energy spectrum and causes count losses due to random co-incidences, which might not resolve within the resolving time of the detection system. In this study, it is aimed to propose a new pulse pileup correction method. The proposed method is to correct the start point of the pileup pulse. The parameters are obtained from the fitted exponential curve using the peak point of the previous pulse and the start point of the pileup pulse. The amplitude at the corrected start point of the pileup pulse can be estimated by the peak time of the pileup pulse. The system is composed of a NaI (Tl) scintillation crystal, a photomultiplier tube, and an oscilloscope. A 61 μCi ¹³⁷Cs check-source was placed at a distance of 3 cm, 5 cm, and 10 cm, respectively. The gamma energy spectra for the radioisotope of ¹³⁷Cs were obtained to verify the proposed method. As a result, the correction of the pulse pileup through the proposed method shows a remarkable improvement of FWHM at 662 keV by 29, 39, and 7%, respectively.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.71-79
• /
• 2019

This research proposes an automatic generation system of aimpoints with considering 3D target shapes and CEP(circular error probability) values after determining a target and an azimuth value. In the past, users decided aimpoints manually based on experience or just chose a middle point of the 3D model. Futhermore, it was not possible to select a proper position with consideration of azimuth because users should decide aimpoints before the azimuth value was determined. To solve this problem, this research provides a automatic system to compute proper aimpoints with 3D target shapes, azimuth values and CEP. This article contains the explanation of 3 steps for generating aimpoints automatically: first, generating a reference plane and candidate entry points, then computing scores of each entry points and finally determining an aimpoint from the entry point with the highest score. Users can easily determine a final aimpoint with high probability of success using this system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.975-985
• /
• 2018

The drones have been developed for military purposes and are now used in many fields such as logistics, communications, agriculture, disaster, defense and media. As the range of use of drones increases, cases of abuse of drones are increasing. It is necessary to develop anti-drone technology to detect the position of unwanted drones using the physical phenomena that occur when the drones fly. In this paper, we estimate the DOA(direction of arrival) of the drone by using the acoustic signal generated when the drone is flying. In addition, the dynamics model of the drones was applied to the unscented kalman filter to improve the microphone array detection performance and reduce the error of the position estimation. Through simulation, the drone detection performance was predicted and verified through experiments.

• Journal of Arbitration Studies
• /
• v.29 no.2
• /
• pp.107-132
• /
• 2019

The arbitration procedure, which is a private trial, does not have a separate enforcement agency. Therefore, unless a party consents to the arbitration award and voluntarily fulfills the award, its execution is accomplished through the implementation of the national court. In particular, the decision in the foreign arbitration procedure will be refused or rejected for the arbitration award in case the proceedings of the law and procedure on which the judgment is based are caused by inconsistency with the domestic law or procedural defect. However, all foreign arbitration awards generally do not have to go through the approval process, and it will come into force with the arbitration award. In the case of Germany in the revision of the German Civil Procedure Act of 1996, the main provisions of the New York Convention concerning the ratification and enforcement of arbitration proceedings are reflected. Germany provides for the arbitration procedures in the arbitration proceedings of Book 10 of the Civil Procedure Act. Particularly, with Article 1061 in Book 10 Section 8 below, the approval and enforcement of foreign arbitrators shall be governed. Article 1061 has been referred to as "The New York Convention on the Recognition and Enforcement of Foreign Jurisdictions," Article 5 (1). The main reasons for approval and enforcement rejection are: (1) Reason for the acceptance or refusal of enforcement by request of the parties: Reason for failure of subjective arbitration ability, invalidation of arbitration agreement, collapse of attack or defense method, dispute not included in arbitration agreement, (2) Reasons for the approval and enforcement of arbitration considered by the competent authority of the arbitrator: violation of objective arbitration ability, violation of public order, but not based on the default of German statute.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.865-889
• /
• 2019

The need for cyber resilience is increasingly important in our technology-dependent society where computing devices and data have been, and will continue to be, the target of cyber-attackers, particularly advanced persistent threat (APT) and nation-state/sponsored actors. APT and nation-state/sponsored actors tend to be more sophisticated, having access to significantly more resources and time to facilitate their attacks, which in most cases are not financially driven (unlike typical cyber-criminals). For example, such threat actors often utilize a broad range of attack vectors, cyber and/or physical, and constantly evolve their attack tactics. Thus, having up-to-date and detailed information of APT's tactics, techniques, and procedures (TTPs) facilitates the design of effective defense strategies as the focus of this paper. Specifically, we posit the importance of taxonomies in categorizing cyber-attacks. Note, however, that existing information about APT attack campaigns is fragmented across practitioner, government (including intelligence/classified), and academic publications, and existing taxonomies generally have a narrow scope (e.g., to a limited number of APT campaigns). Therefore, in this paper, we leverage the Cyber Kill Chain (CKC) model to "decompose" any complex attack and identify the relevant characteristics of such attacks. We then comprehensively analyze more than 40 APT campaigns disclosed before 2018 to build our taxonomy. Such taxonomy can facilitate incident response and cyber threat hunting by aiding in understanding of the potential attacks to organizations as well as which attacks may surface. In addition, the taxonomy can allow national security and intelligence agencies and businesses to share their analysis of ongoing, sensitive APT campaigns without the need to disclose detailed information about the campaigns. It can also notify future security policies and mitigation strategy formulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.573-575
• /
• 2019

Recently, augmented reality (AR) technology has been widely used in a variety of fields such as defense, medical, education, and entertainment. In the augmented reality environment, a user can interact a virtual object by the user 's specific behaviors. Also, it is necessary to use a technique to automatically interacts among the generated virtual objects. In this paper, we propose an authoring model to apply augmented reality environments based on quantum computing inspired entanglement and overlapping phenomenon. For example, it is possible to allow the user to automatically increase and decrease the number of the object with the characteristics of the virtual object without user intervention. As a tested platform for this purpose, this paper provide an augmented reality eco-system environment with automatic interaction among virtual animals.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.289-299
• /
• 2019

Attitude control modeling and simulation (M&S) can be extensively applied in overall development process, from simple algorithm design to on-board software verification. This paper introduces CMG-based attitude control M&S software, which consists of 6-DOF modeling (CMG and space environments modeling), and attitude control algorithm. The M&S software is divided into three modules, from an inner CMG motor control module to an outer earth observation mission module. While an application of this developed software is currently limited to the initial-phase attitude controller development, its application area can be extended to the later-phases by considering sophisticated model information in future.

• Journal of Ginseng Research
• /
• v.43 no.2
• /
• pp.179-185
• /
• 2019

Background: Oxidative stress induces the production of reactive oxygen species (ROS), which play important causative roles in various pathological conditions. Black ginseng (BG), a type of steam-processed ginseng, has drawn significant attention due to its biological activity, and is more potent than white ginseng (WG) or red ginseng (RG). Methods: We evaluated the protective effects of BG extract (BGE) against oxidative stress-induced cellular damage, in comparison with WG extract (WGE) and RG extract (RGE) in a cell culture model. Ethanolic extracts of WG, RG, and BG were used to evaluate ginsenoside profiles, total polyphenols, flavonoid contents, and antioxidant activity. Using AML-12 cells treated with $H_2O_2$, the protective effects of WGE, RGE, and BGE on cellular redox status, DNA, protein, lipid damage, and apoptosis levels were investigated. Results: BGE exhibited significantly enhanced antioxidant potential, as well as total flavonoid and polyphenol contents. ATP levels were significantly higher in BGE-treated cells than in control; ROS generation and glutathione disulfide levels were lower but glutathione (GSH) and NADPH levels were higher in BGE-treated cells than in other groups. Pretreatment with BGE inhibited apoptosis and therefore protected cells from oxidative stress-induced cellular damage, probably through ROS scavenging. Conclusion: Collectively, our results demonstrate that BGE protects AML-12 cells from oxidative stress-induced cellular damages more effectively than WGE or RGE, through ROS scavenging, maintenance of redox status, and activation of the antioxidant defense system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.739-748
• /
• 2021

This paper discusses the prediction and validation of design loads of satellite components using modal mass acceleration curve (Modal MAC). To calculate the acceleration upper bound of the satellite components subjected to the launch environment by the Modal MAC, the parameters of SpaceX Falcon 9 launch vehicle were used, and the acceleration upper bound curve in the modal domain was derived. After that, the maximum acceleration loads applied to the satellite components were predicted by combining Modal MAC with the spacecraft interface loads of the satellite/launch vehicle and modal information of the satellite. In addition, the accuracy of the Modal MAC was validated through comparison with the results of the coupled loads analysis using a simple satellite and launch vehicle model.