• Convergence Security Journal
• /
• v.5 no.4
• /
• pp.41-48
• /
• 2005

Objective of this study is to design and implement security system based on intrusion tolerance technology for the improvement of dependability in defense system. In order to do so, I identify and extract core technologies through the research and analysis into characteristics, structures, main functions, and technologies of intrusion tolerance architecture. And I accomplish a design of security system through the redundant system based on these core technologies. To implement and verify intrusion tolerance system, I chose 'wargame system' as a subjected system, and accomplished 'Wargame Intrusion Tolerance System' and verified security required functions through a performance test. By applying showed security system into the development of application software based on intrusion tolerance, systematic and efficient system could be developed. Also applying 'WITDS' can solve the current security problems, and this will be basic model for design of security architecture in the federation system after.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.35-44
• /
• 2020

The purpose of this study is to elaborate the request for proposal (RFP) for the localization parts development support project of core parts carried out by the Defense Agency for Technology and Quality. The RFP is the most important document throughout the localization parts project, including project announcement and developer selection, design and test of the development product, final evaluation, and standardization of the project. However, if the RFP is not established at the beginning of the project, there is an increased risk of business failure due to frequent changes by various reasons. In this study, we recognized the necessity of elaboration of RFP and applied the AHP method for quantitative elaboration. Eight requirements of the RFP related to the mechanical/electrical performance of localized development products and three elaboration methods for each requirement were designed in a hierarchical structure, and each weight was calculated by applying the 5-point scale AHP method. The AHP survey was conducted with 20 developers participating in the localization parts project, and the consistency ratio of the AHP survey result was less than 0.1. The elaboration method with the highest value among the calculated weights is classified, and the analysis results and future research directions of the elaboration method are presented.

• Convergence Security Journal
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2020

Recently, the fourth industrial revolution technology has not only changed everyday life greatly through technological development, but has also become a major keyword in the establishment of defense policy. In particular, Internet of Things, cloud, big data, mobile and cybersecurity technologies, called ICBMS, were selected as core leading technologies in defense information policy along with artificial intelligence. Amid the growing importance of the fourth industrial revolution technology, research is being carried out to develop the C4I system, which is currently operated separately by the Joint Chiefs of Staff and each military, including the KJCCS, ATCIS, KNCCS and AFCCS, into an integrated system in preparation for future warfare. This is to solve the problem of reduced interoperability for joint operations, such as information exchange, by operating the C4I system for each domain. In addition, systems such as the establishment of an integrated C4I system and the U.S. military's Risk Management Framework (RMF) are essential for efficient control and safe operation of weapons systems as they are being developed into super-connected and super-intelligent systems. Therefore, in this paper, the intelligent cyber threat detection, management of users' access to information, and intelligent management and visualization of cyber threat are presented in the future C4I system based on big data/cloud.

• Journal of the Korea Society for Simulation
• /
• v.33 no.3
• /
• pp.13-26
• /
• 2024

The CBRN(Chemical, Biological, Radiological, and Nuclear) hazard prediction model is a system that supports commanders in making better decisions by creating contamination distribution and damage prediction areas based on the weapons used, terrain, and weather information in the events of biochemical and radiological accidents. NBC_RAMS(Nuclear, Biological and Chemical Reporting And Modeling S/W System) developed by ADD (Agency for Defense Development) is used not only supporting for decision making plan for various military operations and exercises but also for post analyzing CBRN related events. With the NBC_RAMS's core engine, we introduced a CBR hazard assessment scenario analysis system that can generate contaminant distribution prediction results reflecting various CBR scenarios, and described how to apply it in specific purposes in terms of input information, meteorological data, land data with land coverage and DEM, and building data with pologon form. As a practical use case, a technology development case is addressed that tracks the origin location of contaminant source with artificial intelligence and a technology that selects the optimal location of a CBR detection sensor with score data by analyzing large amounts of data generated using the CBRN scenario analysis system. Through this system, it is possible to generate AI-specialized CBRN related to training and analysis data and support planning of operation and exercise by predicting battle field.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.98-102
• /
• 2012

These days, Uncooled IR Systems are more popular in the area of defense and aerospace than before. Uncooled IR Systems are widely used as core technology for making unmanned systems and detecting enemy objects during the day and night in the distance. Recently, researches on TEC-less IRFPA have been increased to minimize the power consumption and to make a smaller system than before. For this, it needs to find adequate NUC(Non-Uniformity Correction) coefficients as FPA(Focal Plane Array) temperature changes. In this paper, we propose a new NUC coefficient estimating technique, DCCE-LI(Dynamic Calibration Coefficients Estimation with Linear Interpolation), for TEC-less IRFPA. It is based on a linear interpolation method and it can estimate NUC coefficients in real-time. So, by testing and evaluating it with some IR images, we conclude that the quality of IR images using proposed method is better than applying static coefficients.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.47-57
• /
• 2022

UAVs have been deployed various missions such as deception, reconnaissance and attack since they have been applied in battlefield and achieved missions successfully instead of man. In the past, it is impossible for UAVs to conduct autonomous missions or cooperative mission between manned aircraft due to the limitation of the technology. However, theses missions are possible owing to the advance in communication and AI Technology. In this research, we identified the possible cooperative missions between manned and unmanned team based on air-to-air mission. We studied cooperative manned and unmanned tactics about fighter sweep mission which is the core and basic operation among various air-to-air missions. We also developed cooperative tactics of manned and unmanned team by classifying nonstealth and stealth confrontational tactics. Hereafter, we verified the validity of the suggested tactics using computer simulations.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.257-270
• /
• 2021

Since African swine fever (ASF) spread to East Asia, a fatal crisis has occurred in the global pig industry, because Asia is dominant in pig production. Although some studies conducted bibliometric analysis on ASF, few studies compared research networks, and identified subthemes by major keywords. To fill this gap, this study identified the knowledge structure network of the research, its influence, and core research themes by utilizing the bibliometric analysis of 337 ASF-related journal articles over 50 years from 1970 to 2020 on the Web of Science. The result indicated that papers are mainly published in the fields of veterinary science, virology, microbiology, infectious disease and applied microbiology, and in particular, the fields of veterinary science and virology showed unrivaled weights as they account for 73.40%. With regard to cooperative relationships, European countries such as the UK, Germany, Italy, and Denmark, centered on Spain, are actively contributing to the ASF research. China, France, Thailand, Japan, Vietnam, and South Korea are leading research cooperation, centering on the United States. In the early stage of the studies, major keywords appeared to be related to outbreaks, quarantine and diagnosis, and in the middle stage, the keywords were expanded to a wide range of pig diseases. Recently, the keywords are becoming more diverse towards antibodies, cross-border transmission and disease monitoring. Based on data on major keywords related to ASF, this study proposed discussions and implications for activating ASF research including genotype, protein, vaccine, diagnosis, defense against infection and epidemiological investigation.

• Journal of the Korea Society for Simulation
• /
• v.31 no.3
• /
• pp.1-10
• /
• 2022

Defense fields widely operate unmanned systems to lower vulnerability and enhance combat effectiveness. In the navy, swarm unmanned surface vehicles(USVs) form a cluster within communication range, share situational awareness information among the USVs, and cooperate with them to conduct military missions. This paper proposes an interface system, i.e., Interface Adapter System(IAS), to achieve inter-USV and intra-USV interoperability. We focus on the mission planning subsystem(MPS) for interoperability, which is the core subsystem of the USV to decide courses of action such as automatic path generation and weapon assignments. The central role of the proposed system is to exchange interface data between MPSs and other subsystems in real-time. To this end, we analyzed the operational requirements of the MPS and identified interface messages. Then we developed the IAS using the distributed real-time middleware. As experiments, we conducted several integration tests at swarm USVs simulation environment and measured delay time and loss ratio of interface messages. We expect that the proposed IAS successfully provides bridge roles between the mission planning system and other subsystems.

• Maritime Security
• /
• v.4 no.1
• /
• pp.115-138
• /
• 2022

The Korean military is preparing for successful manpower reduction using advanced science and technology, in addition to carrying out the initiative of the Defense Innovation 4.0. Accordingly, studies on core technologies related to defense reform have been conducted both internally and externally in the military, and the corresponding results have also been applied. Nevertheless, compared to the development of such technologies, it is considered necessary to have more preparation for the policies related to the operation of the newly introduced equipment. As for the placement of personnel and the organization of time in service (TIS) with respect to the operation of surveillance equipment, there has been a tendency to sustain the conventional practice. Therefore, this study intends to suggest the schemes for facilitating policy improvements in the operation of manpower and security regulations in the field of information for the purpose of introducing a successful next-generation coastal guard system. To do this, the approach of this study was focused on the policies for the operation of the guard system. This is in contrast to previous studies that centered on its equipment and technologies. In addition, how to efficiently operate the guard system was also studied in view of cognitive science by deriving the most efficient time for a person to execute surveillance through the monitor based on the previous studies.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.13-19
• /
• 2012

Recently, as the importance of the interior noise in a ship cabin has risen, ship builders have becomeconcerned about the use of noise reduction panels to reduce cabin noise. The results of previous researches have been based on analytical and experimental methods using simple sandwich panels. However, panel structures are becoming more complex to improve the transmission loss. Thus, researches that analyze the transmission loss of a panel are reaching the limit of study. This paper reports on research that was performed to determine the sound transmission characteristics of multi-complex panels applicable to high value-added vessels. It presents comparisons between analytical methods and experimental results by using a mini-reverberant chamber with components of sound attenuation panels, including the core and surface materials. The sound transmission loss of multi-complex panels are also analyzed in terms of the influences of the inside perforate plates and air gap thickness on the attenuation. Finally, the multi-complex panel with the highest noise attenuation is proposed based on the analysis results and experimental results in mini-reverberant chamber, which wereverified using a real-size reverberant chamber.