• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.754-762
• /
• 2019

The transfer case for special truck are usually produced by only a few specialized companies. The special technical data are not unveiled. In order to complete the development successfully, it is necessary to carry out the compatibility tests such as the running test on the vehicle, which is the test condition of the military vehicle. In this research, transfer case the core-component of the '230 mm K-MLRS' has been developed with the reverse engineering and the prototype is developed through structural analysis. The transfer case developed through this research is currently used in the '230 mm K-MLRS'. The development process In this research are useful in the development of similar products.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.380-386
• /
• 2015

Guaranteeing quality of service over a multihop wireless network is difficult because end-to-end (ETE) delay is accumulated at each hop in a multihop flow. Recently, research has been conducted on network coding (NC) schemes as an alternative mechanism to significantly increase the utilization of valuable resources in multihop wireless networks. This paper proposes a new section-based joint NC and scheduling scheme that can reduce ETE delay and enhance resource efficiency in a multihop wireless network. Next, this paper derives the average ETE delay of the proposed scheme and simulates a TDMA network where the proposed scheme is deployed. Finally, this paper compares the performance of the proposed scheme with that of the conventional sequential scheduling scheme. From the performance analysis and simulation results, the proposed scheme gives more delay-and energy-efficient slot assignments even if the NC operation is applied, resulting in a use of fewer network resources and a reduction in ETE delay.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.275-282
• /
• 2015

Recently, telemetry systems are used to test and evaluate of ammunition. When a transmitting signal from a small transmitter mounted inside the ammunition is sent out, the receiving equipments get real-time RF data. This paper relates to the development of a small high-G endurable transmitter and a portable receiving equipment. The system was tested and confirmed 00 km communication range.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.123-127
• /
• 1997

Various recrystallization techniques has been applied to control morphology and size of NTO(3-nitro-1, 2, 4-triazole-5-one) crystals. With cooling method, it was found that the size of NTO at aqueous solution was controlled in the range of 5 to 500 $\mu\textrm{m}$. The spherical or cubic shapes of particles were obtained by adjusting operating conditions. Hexagonal and cubic shaped crystals of NTO were also obtained by sonication and evaporative method using aqueous solution of NTO. Their particle sizes were ranged 20 to 30 $\mu\textrm{m}$. In gas anti-solvent method with NTO/DMF and NTO/DMSO solutions, cubic type of NTO was obtained and the range of their sizes was 0.5-2$\mu\textrm{m}$.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.36.4-36.4
• /
• 2008

• Carbon letters
• /
• v.13 no.2
• /
• pp.109-114
• /
• 2012

A nuclear, biological, chemical (NBC) canister was indigenously developed using active carbon impregnated with ammoniacal salts of copper (II), chromium (VI) and silver (I), and high efficiency particulate aerosol filter media. The NBC canister was evaluated against carbon tetra chloride ($CCl_4$) vapours, which were used as a simulant for persistent chemical warfare agents under dynamic conditions for testing breakthrough times of canisters of gas masks in the National Approval Test of Respirators. The effects of $CCl_4$ concentration, test flow rate, temperature, and relative humidity (RH) on the breakthrough time of the NBC canister against $CCl_4$ vapour were also studied. The impregnated carbon that filled the NBC canister was characterized for surface area and pore volume by $N_2$ adsorption-desorption isotherm at liquid nitrogen temperature. The study clearly indicated that the NBC canister provides adequate protection against $CCl_4$ vapours. The breakthrough time decreased with the increase of the $CCl_4$ concentration and flow rate. The variation in temperature and RH did not significantly affect the breakthrough behaviour of the NBC canister at high vapour concentration of $CCl_4$, whereas the breakthrough time of the NBC canister was reduced by an increase of RH at low $CCl_4$ vapour concentration.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.789-796
• /
• 2016

In the Core Technology R&D of the defence area, the development of the related core element technology could be the foundation to develop advanced weapon system in the future. But it might make various problems if you can not accurately define the TRL of the element technology. In other words, if the technology is not sufficiently mature and then the project starts, it might require an increase in the development period and additional cost. Finally the system will be in an incomplete state and result in user dissatisfaction and the project failure. Therefore it is a very important task to properly assess the TRL for a successful project. In this study, We propose the method for risk management of core technology R&D project of the defence area using the QFD process with degree of difficulty and technology readiness level. It is also presented the process to determine the risk level using TRL and Degree of difficulty. Finally We apply this method to UGV system for verifying the result of this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.96-102
• /
• 2015

Traditional propellants emit toxic gases such as carbon dioxide and hydrogen chloride during combustion which are harmful to the environment. This study established a synthetic process of a high nitrogen containing derivative of tetrazine, 3,3-Azobis(6-Amino-1,2,4,5-Tetrazine) (DAAT), which can be applied as solid fuels for a solution to environmental concerns. Also, this paper described the detailed process and the analytic results of properties, which were not mentioned in previous reports. The compound was characterized by NMR, IR spectroscopy, and thermal, impact, and friction stability were measured. In addition, the heats of formation (${\Delta}H_f$) and detonation properties (pressure and velocity) of DAAT were calculated using Gaussian 09 and EXPLO5 programs.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.579-586
• /
• 2017

The defense industry has become a global industry, and military technology is actively being traded between countries to increase their military capabilities. The Republic of Korea has been ranked one of the top 10 countries for exports of military technology. To maintain competitive advantages in the global defense industry, it is essential to protect key technologies employed by exported weapon systems. Various techniques have been developed for protection of confidential technologies in weapon systems, and the U.S. DoD has been leading the development of the protection techniques. This paper reviews current anti-tampering techniques that prevent leakage of key technology from weapon exportation or pillage. Based on the protection techniques employed by the U.S. DoD Anti-Tamper Executive Agent, this paper suggests novel design methods for protection of confidential technologies. The proposed design methods were tested on an actual weapon system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.106-123
• /
• 2019

Demand for performance analysis is increasing for efficient use of limited budgets such as improving investment efficiency and strategic budget allocation in accordance with the continuous increase demand of R&D budget for developing advanced weapon systems in the future battlefields. In accordance with the Act on the Performance Evaluation and Performance Management of the National R&D Projects established in March 2006, the performance analysis has been conducted for the systematic management and utilization of the R&D project performance. It was recognized as a project to achieve self-defense through strengthening the weapons system development capability, however, efficiency evaluation of Defense R&D projects was not much emphasized. Research on the efficiency analysis of defense R&D projects has been conducted in recent years, but most studies focused on corporate efficiency and productivity of defense companies. In this study, we analyzed the three-stage performance of defence R&D projects based on the logical model using the data envelope analysis(DEA) model. We also analyzed performance analysis from various perspectives through R&D type, technology classification and performance model. This study is expected to help defense department improve defense R&D projects and make decision.