• Journal of Korean Institute of Industrial Engineers
• /
• v.10 no.1
• /
• pp.11-16
• /
• 1984

An economic model is developed for determining optimal locations of screening inspection stations in a multistage production system. The effect of screening inspection on the production rate is explicitly considered, and a fixed cost for maintaining an inspection station is assumed. The product is allowed to have multiple defects, each of which may be inspected at any inspection station after the defect-generating operation. The problem is formulated as a mixed 0-1 linear program which offers the advantage of versatility in handling various system constraints.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2020

Large-scale industrial facility structures continue to deteriorate due to the effects of operating and environmental conditions. The problems of these industrial facilities are potentially causing economic losses, environmental pollution, casualties, and national losses. Accordingly, in order to prevent disaster accidents of large structures in advance, the necessity of diagnosing structures using non-destructive inspection techniques is being highlighted. The defect occurrence, location and defect type of the structure are important parameters for predicting the remaining life of the structure, so continuous defect observation is very important. Recently, many researchers have been actively researching real-time monitoring technology to solve these problems. Structure Health Monitoring Inspection is a technology that can identify and respond to the occurrence of defects in real time, but there is a limit to check the degree of defects and the direction of growth of defects. In order to compensate for the shortcomings of these technologies, the importance of defect imaging techniques is emerging, and in order to find defects in large structures, a method of inspecting a wide range using guided ultrasonic is effective. The work presented here introduces a calculation for the shape factor for evaluation of the damaged area, as well as a variable β parameter technique to correct a damaged shape. Also, we perform research in modeling simulation and an experiment for comparison with a suggested inspection method and verify its validity. The curved structure image obtained by the advanced RAPID algorithm showed a good match between the defect area and the shape.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.6
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.1-11
• /
• 1999

The aim of this study is to construct a machine vision monitoring system for an automatic visual inspection of weld joint in steel structure. An image processing algorithm for a visual weld defects detection on weld bead is developed using the intensity image. An optic system for getting four intensity images was set as a fixed camera position and four different illumination directions. The input images were thresholded and segmented after a suitable preprocessing and the features of each region were defined and calculated. The features were used in the detection and the classification of the visual weld defects. It is confirmed that the developed algorithm can detect weld defects that could not be detected by previously developed techniques. The recognized results were evaluated and compared to expert inspectors' results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.311-316
• /
• 2010

Defects positioning of underground gas pipelines using MFL(magnetic flux leakage) inspection which is one of non-destructive evaluation techniques is proposed in this paper. MFL signals acquired from MFL PIG(pipeline inspection gauge) have nonlinearity and distortion caused by various external disturbances. SQI(self quotient image), a compensation technique for nonlinearity and distortion of MFL signal, is used to correct positioning of pipeline defects. Through the experiments using artificial defects carved in the KOGAS pipeline simulation facility, it is found that the performance of proposed defect detection is greatly improved compared to that of the conventional DCT(discrete cosine transform) coefficients based detection.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.8
• /
• pp.742-747
• /
• 2015

The quality of steel plate products is determined by the number of defects and the process problems are estimated by shapes of defects. Therefore pinholes defects of cold rolled steel have to be controlled. In order to improve productivity and quality of products, within each production process, the product is inspected by an adequate inspection system individually in the lines of steelworks. Among a number of inspection systems, we focus on the pinholes detection system. In this paper, we propose an embedded system using FPGA which can detect pinholes defects. The proposed system is smaller and more flexible than a traditional system based on expensive frame grabbers and PC. In order to detect consecutive defects, FPGAs acquire two dimensional image and process the image in real time by using correlation of lines. The proposed pinholes detection algorithm decreases arithmetic operations of image processing and also we designed the hardware to shorten the data path between logics due to decreasing propagation delay. The experimental results show that the proposed embedded system detects the reliable number of pinholes in real time.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.17-21
• /
• 2012

The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.701-704
• /
• 2006

The catenaries must guarantee the constant electricity to the trains, so that the safety and the estimate of fatigue degree and the inspection of abrasion degree should be done rapidly. This thesis proposes the system that can manage the performance/failure of the catenaries using the image process as the solution for the weak points of the existing inspection such as the decrease of immediateness and the lack of constancy in the human resources. This study simulates the ALD using VHSV (Virture HSV) which is the unreal HSV images, not getting the real HSV in ages to the image processing technique that repeats the erosion and the expansion of the images as the methods that can monitor the slight/critical defects of the catenaries as dealing with the result of the catenaries inspection images. The final ALD (Abnormal Line Detection) system is designed based on this simulation. I have demonstrated it with the VHSV (Virture HSV) virtual images as the materials of the test and inspected it through testing the defects of the catenaries for the thesis.

• Smart Structures and Systems
• /
• v.13 no.6
• /
• pp.1041-1063
• /
• 2014

This work introduces a two-module robotic pipe inspection system with ultrasonic NDE device to evaluate the integrity of pipe structures. The proposed robotic platform has high mobility. The two module mobile robot platform overcomes pipe obstacle structures such as elbow, or T-branch joints by cooperative maneuvers. Also, it can climb up the straight pipeline at a fast speed due to the wheel driven mechanism. For inspection of pipe structure, SH-waves generated by EMAT are applied with additional signal processing methods. A wavelet transform is implemented to extract a meaningful and specific signal from the superposed SH-wave signals. Intensity ratio which is normalized the defect signals intensity by the maximum intensity of directly transmitted signals in the wavelet transforms spectrum is applied to evaluate defects quantitatively. It is experimentally verified that the robotic ultrasonic inspection system with EMAT is capable of non-destructive inspection and evaluation of defects in pipe structure successfully by applying signal processing method based on wavelet transform.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.619-625
• /
• 2015

There is a large interest to find reliable and automatic methods for crack detection and quantification in the railway bogie frame. The non-destructive inspection of railway bogie frame has been performed by ultrasonic and magnetic particle testing in general inspection. The magnetic particle method has been utilized in the defect inspection of the bogie frame but the grinding process is required before inspection and the dust is developed resulting from the processing. The objective of this paper is to apply the inspection method of bogie frame using infra-red thermography. The infra-red thermography system using the excitation of eddy current was performed for the defect evaluation of weld specimen inserted artificial defects. The result shows that the infra-red thermography method can detect the surface and inner defects in weld specimen for bogie frame.