• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.698-702
• /
• 2001

In this paper, to solve the defect of stand-alone type power system in a remote area, a hybrid power system with photovoltaic/wind/diesel generators is proposed. A hybrid power system has a power-balanced controller to equilibrate generation power with a given load demand and which is composed of common DC power system. To execute a power-balanced control, a hybrid power system is assumed that all of power generators have the characteristics of an equivalent current-source and load sharing control technique must be needed at the same time. So this paper describes the algorithm of interactive technique for design of a hybrid power system.

• 비파괴검사학회지
• /
• 제32권6호
• /
• pp.696-702
• /
• 2012

In this study, a noncontact laser ultrasonic system is proposed for rail defect detection. An Nd-Yag pulse laser is used for generation of ultrasonic waves, and the corresponding ultrasonic responses are measured by a laser Doppler vibrometer. For the detection of rail surface damages, the shape of the excitation laser beam is transformed into a line. On the other hand, a point source laser beam is used for the inspection of defects inside a rail head. Then, the interactions of propagating ultrasonic waves with defects are examined using actual rail specimens. Amplitude attenuation was mainly observed for a surface crack, and reflections were most noticeable from an internal damage. Finally, opportunities and challenges associated with real-time rail inspection from a high-speed train are discussed.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.539-542
• /
• 2011

Thin-film transistors (TFTs) are fabricated using an amorphous indium gallium zinc oxide (a-IGZO) channel layer by rf-magnetron sputtering. Oxygen partial pressure significantly changed the transfer characteristics of a-IGZO TFTs. Measurements performed on a-IGZO TFT show the change of threshold voltage in the transistor channel layer and electrical properties with varying $O_2$ ratios. The device performance is significantly affected by adjusting the $O_2$ ratio. This ratio is closely related with the modulation generation by reducing the localized trapping carriers and defect centers at the interface or in the channel layer.

• Interaction and multiscale mechanics
• /
• 제4권2호
• /
• pp.139-153
• /
• 2011

In this paper we develop a fully anisotropic pressure and temperature dependent model to investigate the effect of the microstructure on the shock response of ${\beta}$-HMX molecular single and polycrystals. This micromechanics-based model can account for crystal orientation as well as crystallographic twinning and slip during deformation and has been calibrated using existing gas gun data. We observe that due to the high degree of anisotropy of these polycrystals, certain orientations are more favorable for plastic deformation - and therefore defect and dislocation generation - than others. Loading along these directions results in highly localized deformation and temperature fields. This observation confirms that most of the temperature rise during high rates of loading is due to plastic deformation or dislocation pile up at microscale and not due to volumetric changes.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.91-97
• /
• 2002

One of the most important things in mobile phone service is Hand-Off (H/O). Meantime soft H/O and softer H/O have been used between the same generations (2G↔2G) and there is little problem. With user's needs and the development of communication technology, the system with different generation coexists and pilot beacon and time-periodic beacon are used for H/O between generations (2.5G↔2G) to start service, but it is not economic and efficient. To improve such problems, ENHHO developed in April 2001 has recently used. Unfortunately, this method also has the defect of momentary cutoff of communication information during the procedure of H/O in case of more than 5 pilot signals. Accordingly, we suggest algorithm to improve the problem of ENHHO and examines its propriety by analyzing the results of field survey using the algorithm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.461.2-461.2
• /
• 2014

양자점은 밴드갭을 조절할 수 있거나 multiple exciton generation등 과 같은여러가지 장점을 갖고 있어 양자점 감응형 태양전지에 대한 많은 연구가 진행되어왔다. 하지만 아직까지 이론적인 에너지 전환 효율에 비하여 낮은 효율을 보여주고 있다. 이러한 낮은 효율은 양자점과 전해질 계면에서의 defect나 surface state로 인한 전자-정공의 재결합으로 설명할 수 있다. 본 연구에서는 CdSe 양자점 합성법 중의 하나인 Chemical Bath Deposition의 전구체 농도조절을 통하여 고품질의 CdSe양자점을 합성하였다. 특정 농도에서 CdSe 양자점 표면에 생성되는 SeO2층을 억제하여 CdSe양자점/전해질 계면에서의 전하 재결합 저항을 높였고 가장 높은 에너지 전환 효율을 보여주었다.

• KSBB Journal
• /
• 제23권1호
• /
• pp.8-17
• /
• 2008

There are many different approaches to healing of acute and chronic ulcer and large skin defect, such as burn. Currently available wound covers fall into two categories. Permanent covering, such as autografts, and temporary ones, such as allograft including de-epidermized cadaver skin, bioartificial skin, xenografts, and synthetic dressings. Autologous skin grafting in the form of split- or full-thickness skin is still the good standard. Following on from developments in the 1980s involving the use of cultured keratinocyte grafts in wound healing, the last decade has been great progress in the fabrication of composite bioartificial skin grafts. However, two bottleneck on producing cultured bioartificial skin, whether of the simple epithelial cell sheet type, or the more complex composite type, continue to be the generation of sufficient keratinocytes cheaply and quickly and develop biocompatible dermal scaffolds. This article covers the development, clinical application, and current research directions associated with bioartificial skin.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1116-1122
• /
• 2005

A finite element method was used to simulate the wave propagation of laser-generated ultrasound and its interaction with surface breaking cracks in an elastic material. Thermoelastic laser line source on the material surface was approximated as a shear dipole and loaded as nodal forces in the plane-strain finite element (FE) model. The shear dipole- FE model was tested for the generation of ultrasound on the surface with no defect. The model was found to generate the Rayleigh surface wave. The model was then extended to examine the interaction of laser generated ultrasound with surface-breaking cracks of various depths. The crack-scattered waves were monitored to size the crack depth. The proposed model clearly reproduced the experimentally observed features that can be used to characterize the presence of surface-breaking cracks.

• 한국수정란이식학회지
• /
• 제7권1호
• /
• pp.49-55
• /
• 1992

Animal experiments need numerous kinds of animal which are suitable for every research. About 300 mouse strains are developed up to the present, but they do not give satisfaction to every researchers. So we must build up the methods of breading animals which are newly developed and of maintenance of characteristics which were developed before. To maintain experimental animal is not only proceeding the generation but also increasing the animal populations, it needs geneticai control. Genetic factors which influence to reproduction are very important to maintain colony. These factors include lethal gene, chromosomal abberation, sterility gene, etc.. With the recent development of transgenic technology, scientists now can deliberately creat numerous specific animal models. To know how to manage the colony which has genetic defect on reproduction and transgenic mice is one of the key to study in vitro fertilization.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.650-655
• /
• 2011

Analysis of two-dimensional Rayleigh wave scattering pattern by a surface defect is studied through modified boundary element method. BEM proposed in this paper has special treatment at each end of boundary which should have the Rayleigh wave go away without any generation of virtual reflections. It is shown that treatment for truncated boundary which is used to model two-dimensional Rayleigh waves' behavior in an elastic half-space is successfully implemented. To check numerical results' accuracy, time domain IFFT signal of the displacements is presented. Improvement on getting rid of unwanted influence of truncated boundary induced by 2-D Rayleigh waves on a flat surface of an elastic half-infinite medium is shown. As a final goal, the numerical results of Rayleigh wave scattering trend are plotted and they are compared with theoretical curves to prove its accuracy.