• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.137-139
• /
• 2007

In optical disk drives, a conventional control method in the presence of surface defect is holding the previous tracking control command. It is known that the method has a long settling time. This paper proposes a new control method which reduces the settling time. An optical head generally has coupled dynamics between focusing and tracking servo system. We present how to compensate the coupled dynamics so that reduced settling time is achieved. It is verified by experiments that the proposed method brings an improved performance in the presence of surface defect as well as in the normal operating condition.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.627-632
• /
• 2016

In this paper, we propose a new vision-based defect inspection system for the surface of hot slabs. To minimize the influence of self-emission from slab surfaces with high temperature, an optic method based on blue LED light and a blue pass filter is proposed. Because the slab surface is partially covered with scales, which are unavoidable oxidized substances caused during manufacturing, it is difficult to distinguish between vertical cracks and scale. In order to resolve this problem and to improve the detection performance, the use of a Gabor filter and dynamic programming are proposed. Finally, the effectiveness of the proposed method is shown by means of experiments conducted on images of hot slabs that were obtained from an actual slab production line.

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.158-164
• /
• 2005

Kusukawa and Ohta presented the $CS_{CQ-r}$ chart to monitor the process defect $rate{\lambda}$ in high-yield processes that is derived from the count of defects. The $CS_{CQ-r}$ chart is more sensitive to $monitor{\lambda}$ than the CQ (Cumulative Quantity) chart proposed by Chan et al.. As a more superior chart in high-yield processes, we propose a Synthetic chart that is the integration of the CQ_-r chart and the $CS_{CQ-r}$chart. The quality characteristic of both charts is the number of units y required to observe r $({\geq}2)$ defects. It is assumed that this quantity is an Erlang random variable from the property that the quality characteristic of the CQ chart follows the exponential distribution. In use of the proposed Synthetic chart, the process is initially judged as either in-control or out-of-control by using the $CS_{CQ-r}$chart. If the process was not judged as in-control by the $CS_{CQ-r}$chart, the process is successively judged by using the $CQ_{-r}$chart to confirm the judgment of the $CS_{CQ-r}$chart. Through comparisons of ARL (Average Run Length), the proposed Synthetic chart is more superior to monitor the process defect rate in high-yield processes to the stand-alone $CS_{CQ-r}$ chart.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.1
• /
• pp.13-17
• /
• 2013

Purpose: This study evaluated the capability of bone formation of silk fibroin particles coated with hydroxyapatites (HA/SF), as bone graft material when put into the calvarial defect of rats. Methods: Twenty Sprague Dawley rats were used for this study and round shaped defects were formed in the center of parietal bones (diameter: 8.0 mm). The defect was filled with (1) HA/SF (experimental group), or (2) left as a vacant space (control group). The animals were sacrificed at 4 or 8 weeks, postoperatively. The specimens were decalcified and stained with Masson's trichrome for histomorphometric analysis. Results: The average of new bone formation was $33.18{\pm}3.10%$ in the experimental group and $20.49{\pm}5.79%$ in the control group at 4 weeks postoperatively. That was $42.52{\pm}7.74%$ in the experimental group and $25.50{\pm}7.31%$ in the control group at 8 weeks postoperatively. The difference between the groups was significantly higher at both 4 weeks and 8 weeks postoperatively (P<0.05). Conclusion: The rat calvarial defect was successfully repaired by HA/SF graft. The HA/SF graft showed more new bone formation compared with the unfilled control.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.223-228
• /
• 2005

In oprical disk drives, surface defects on a disk distort tracking error signal and disturb a precision tracking control.. A conventional method against disk defect is held the tracking control signal when a defective portion is detected. However, if the defective portion is getting longer, objective lens will get away from following track. In order to keep the postion of spot from following track, the servo system must predict tracking error and control the object lens in the defective portion. A tracking control system for optical disk drives was proposed recently based on both Coprime Factorization(CF) and Zero Phase Erro. Tracking(ZPET) control. The system was proposed for overcome the limit of previously tracking error. But there were no research about the method against the defective portion. This paper proposes a new and simple ZPET construct. as a new method against the defective portion. From experimental results, we have proved that proposed method improves the performance against the defective portion, decreases the uncertainty of a model, and requires less memory than the previously proposed method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.259-264
• /
• 2009

High level quality control is required for mobile TFT-LCD modules which are frequently used for fine observation. However, quantitative quality control is difficult. Defect inspection using naked eyes makes irregular inspection results. This paper developed desk type defect inspection equipment for mobile TFT-LCD modules using the same inspection criterion with that of naked eyes. From experiments using this equipments, possibilities of standardization in defect inspection equipment for mobile TFT-LCD modules are presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.98-103
• /
• 2000

This paper suggests a method to recognize the various defect patterns of a cold mill strip using a binary decision tree automatically constructed by a genetic algorithm(GA). In classifying complex patterns with high similarity like the defect patterns of a cold mill stirp, the selection of an optimal feature set and an appropriate recognizer is important to achieve high recognition rate. In this paper a GA is used to select a subset of the suitable features at each node in the binary decision tree. The feature subset with maximum fitness is chosen and the patterns are classified into two classes using a linear decision function. This process is repeated at each node until all the patterns are classified into individual classes. In this way, the classifier using the binary decision tree is constructed automatically. After constructing the binary decision tree, the final recognizer is accomplished by having neural network learning sits of standard patterns at each node. In this paper, the classifier using the binary decision tree is applied to the recognition of defect patterns of a cold mill strip, and the experimental results are given to demonstrate the usefulness of the proposed scheme.

• Archives of Reconstructive Microsurgery
• /
• v.13 no.2
• /
• pp.93-100
• /
• 2004

This study was designed to investigate the optimal period of pedicles implantation in the prefabricated periosteofascial flap with a vascular tissue transfer. The flap prefabrication was prepared with a transposition of left occipital pedicles on the calvarial fascia of male Sprague-Dawley rats. Thirty flaps were divided into five groups of six flaps, including control group (group I) of the conventional periosteofascial flap based on the lateral border of the rat calvarium. The prefabricated flap was elevated as an $1{\times}1cm$ sized island flap based on the implanted pedicle at 1, 2, 3, and 4 weeks after the pedicles transfer in groups II, III, IV, and V, respectively. After the completion of creating a critical-sized calvarial defect and implanting with hydroxyapatite granules, the flap was sutured back for covering the defect and kept isolated from surrounding tissues. Six weeks after flap repositioning, the osseous changes of the defect were examined with simple radiographic findings, radiodensitometric analysis, and histological studies. By simple radiographic findings, specimens of the control, groups IV and V showed homogeneous radioopacity within the defect. But in groups II and III, focal radiolucency was observed in the defect. In the radiodensitometric analysis, the control group and the group V showed significant increased radiodensites statistically. Histologically, the implanted hydroxyapatite was absorbed partly in the defect in groups II, III, and IV. In the defects of the control group and the group V, the implanted hydroxyapatite was kept in its volume and the deposition of the bone cells was observed sparsely. In conclusion, the prefabricated periosteofascial flap can be created with a vascular tissue transfer and the pedicles should be implanted at least for 4 weeks to bring out positive osseous changes in the calvarial defect.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.4
• /
• pp.275-278
• /
• 1998

Recently, the clinical applications of the autogenous cancellous bone from the proximal tibial metaphysis show satisfactory results in the repair of maxillofacial bony defect or deformity. The proximal tibia has the potential to yield viable cancellous bone with a minimum of morbidity. The purpose of this study was to investigate the regeneration of a full thickness proximal tibial bone defect with covering or uncovering of cortical bone. The follow-up periods were 4, 8, and 12 weeks. Bone defect of right side was uncovered and left side was covered with cortical bone. In the experimental group (uncovered cortical bone) at 12 weeks, the inside of defect was filled to normal marrow tissue. The cortical bone defect was united of inner, outer callus at 4, 8 weeks in both study group. At 12 weeks, the cortical bone defect was remodeled and invaded by osteoclast (giant cell) in experimental group. In the experimental specimen at 12 weeks, the regenerating tissue of bone defect was not differ from the control group.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.259-263
• /
• 2006

The applicability of UPT (Ultrasound Pulse Thermography) for real-time defect detection of the ceramic heating plate is described. The ceramic heating plate with superior insulation and high radiation is used to control the water temperature in underwater environment. The underwater temperature control system can be damaged owing to the short circuit, which resulted from the defect of the ceramic heating plate. A high power ultrasonic energy with pulse duration of 280 ms was injected into the ceramic heating plate in the vertical direction. The ultrasound excited vibration energy sent into the component propagate inside the sample until they were converted to the heat in the vicinity of the defect. Therefore, an injection of the ultrasound pulse wave which results in heat generation, turns the defect into a local thermal wave transmitter. Its local emission is monitored and recorded via the thermal infrared camera at the surface which is processed by image recording system. Measurements were Performed on 4 kinds of samples, composed of 3 intact plates and the defect plate. The observed thermal image revealed two area of crack in the defective ceramic heating plate.