• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.299-307
• /
• 2005

The 180 km/h Korean Tilting Train(TTX) which is now developing as a part of the Korean National R&D project, was elaborately designed. As the tilting trains run curve track with the $30\%$ higher speed than normal trains, the higher centrifugal and dynamic force are expected. Furthermore the complex tilting system increase the probability of failure. Therefore it is very important for tilting train to ensure safety against derailment under the various kind of failed condition in the middle of running as well as normal operating condition. The TTX train have the relatively high roll stiffness to improve the lateral ride comfort and to limit the roll displacement on the curve. But the higher roll stiffness increase the risk of derailment on the twisted track. This paper describes the study to review the safety against derailment caused by the wheel unloading on the severely twisted track. The worst combination of maximum cant change with maximum twist defect was established by numerical simulation. And also it was assumed that the air bag deflated and still the train run its speed limit. Those kind of assumption might be the worst case from the view point of wheel unloading derailment on the twisted track. The dynamic simulation was done by means of VAMPIRE S/W and non-linear transient analysis. We found that derailment quotients Q/P was only slightly influenced by track twist but the wheel unloading was greatly influenced. And we ascertained that the higher roll stiffness the higher wheel unloading. In case of air bag deflated situation, the wheel unloading reached up to $100\%$ which means the wheel lift or jumped. Therefore it was concluded that the design need to be improved to ensure the safety against derailment on the maximum twisted track in case of air bag deflated and tilting train's speed limit.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.119-130
• /
• 2007

Statement of problem: A few dry lubricants were applied to abutment screws for the improvement of joint stability. Purpose: The purpose of this study was to evaluate the surface change and fit of TiN-Coated abutment screw through the examination of tested screws in the field emission scanning electron microscope(FE-SEM;Netherland, Phillips co., model:XL 30 SFEG) after repeated closing and opening. Materials and method: Titanium(3i/implant Innovations Inc, USA) and Gold-Tite abutment screws(3i/implant Innovations Inc, USA) were selected for Group A and C respectively. TiN coated titanium abutment screws were also divided into two groups, Group B and D. Abutment screws of each group and the fit of abutment screw/implant fixture/abutment were observed on FE-SEM after repeated closing and opening test respectively. Results: 1. The abutment screws of TiN coated groups(Group B and D) showed more remarkable wear resistance in the threads of the screw than those of the other group(Group A and C). 2. There were more severe wear and defect of TiN coating in Group D tightened to 32 Ncm than Group B to 20 Ncm. 3. There was no difference in the fit of abutment screw/fixture/abutment among four groups, Group A, Group B, Group C and Group D. Conclusion: Under the conditions of this study, it is suggested that TiN coating of abutment screw be clinically acceptable and be expected to reduce the risk of abutment screw loosening. TiN coating of abutment screw showed good resistance against wear and the adequate fit of abutment screw/implant fixture/abutment.

• Clinical and Experimental Pediatrics
• /
• v.61 no.6
• /
• pp.200-204
• /
• 2018

Atopic dermatitis (AD) is a chronic inflammatory skin disease in children. Patients with AD experience a high rate of colonization of the skin surface by Staphylococcus aureus. Because of a skin barrier defect, there is a potential risk of staphylococcal invasive infection in patients with AD. Here, we present 2 cases of breast abscess caused by S. aureus in 2 adolescent girls with severe AD. Methicillin-sensitive S. aureus was identified from the breast abscess material. They were treated with appropriate antibiotics, however surgical drainage of the abscess was needed in case 1. Identical strains were found from the breast abscess material as well as the lesional and the nonlesional skin of the patients through matrix-assisted laser desorption/ionization time-of-flight analysis. We characterized the differential abundance of Firmicutes phylum in patients' skin in microbiota analysis. In particular, S. aureus, a member of Firmicutes, differed significantly between the lesional and the normal-appearing skin. Our cases demonstrate the potential severity of bacterial deep tissue infection in AD and the dysbiosis of skin microbiota may be involved in inflammation in AD.

• Archives of Reconstructive Microsurgery
• /
• v.22 no.1
• /
• pp.33-37
• /
• 2013

Purpose: The concept and development of perforator free flaps have led to significant advances in microsurgery. Ongoing developments in perforator free flap surgery are aimed at reducing complications and improving surgical outcomes. The aim of this study was to evaluate the effectiveness and application of supermicrosurgery in free flap surgery. Materials and Methods: A total of 267 patients with soft tissue defects of the lower extremity due to various etiologies from January, 2007 to January, 2013. The patients received either an anterolateral thigh free flap (n=83), a superficial circumflex iliac artery free flap (n=152), an upper medial thigh free flap (n=19), or a superior gluteal artery perforator free flap (n=13). Microanastomosis was performed using a perforator-to-perforator technique, either end-to-end or end-to-side. Results: The mean postoperative follow up period was eight months (range: one to 16 months) and flap loss occurred in 11 cases out of 267. All cases of flap loss occurred within two weeks of surgery due to either arterial insufficiency (n=5) or venous congestion (n=6). Conclusion: Supermicrosurgery enables the selection of the most efficient perforator for microanastomosis at the defect site. It also reduces the time required for dissection of recipient vessels, and reduces the possibility of injury to major vessels. Microsurgery using a vessel of less than 1 mm has been reported to increase the risk of flap failure; however, using the most advanced surgical tools and developing experience in the technique can produce success rates similar to those found in the literature.

• Archives of Plastic Surgery
• /
• v.47 no.2
• /
• pp.194-197
• /
• 2020

Anterior neck burns represent a major reconstructive challenge due to severe sequalae including restriction in movement and poor aesthetic outcomes. Common treatment options include skin grafting with/without dermal matrices, and loco-regional and distant free flap transfers with/without prior tissue expansion. Such variation in technique is largely influenced by the extent of burn injury requiring resurfacing. In order to optimize like-for-like reconstruction of the anterior neck, use of wide, thin and long flaps such as the anterolateral thigh (ALT) perforator flap have been reported with promising results. Of note, some patients have a tendency towards severe scar contractures, which may be contributed by the greater extent of inflammation during wound healing. We report our experience at 4 years' followup after secondary reconstruction of severe, anterior neck burn contractures in two patients by harvesting the ALT flap with a butterfly design. This technique provides adequate wound resurfacing of the burned neck and surrounding areas, and provides good neck extensibility by addressing both anterior and lateral aspects of the scar defect simultaneously. Such a flap design reduces tension on wound edges and thus, the risk of contracture recurrence in what remains a particularly challenging type of burn reconstruction.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.61-81
• /
• 2004

What is the most important in articles of food is hygienic safety. Because food Is the most common thing in our everyday life, however, the importance of its hygienic safety and other many problems caused by food may be easily neglected. What is more, food is can be dangerous as much as it is directly related to human life and accidents from the same cause may have different effects on the victims according to physical and environmental differences of individuals. Thus PL action for food requires more thorough prevention and measure. Korea has been enforcing 'the Product Liability Act' since the 1/sup 1st/ of July 2002. Product Liability (PL) is liability of the manufacturer or the seller of a product to compensate for the death or injury of consumers or the loss of properties caused by the defect of the product. This study surveyed consumers' response to and the effects of the enforcement of the Product Liability Act, investigated how consumers perceived the importance of food safety and the risk of defective food based on PL standards and their experience in damage by food through a questionnaire survey, and analyzed collected data through empirical analyses (reliability analysis, factorial analysis, regression analysis and ANOVA t-test) using SPSS 10.0. Based on the results of analysis, the researcher proposed strategies for coping with the Product Liability Act in the food industry.

• Clinical and Experimental Pediatrics
• /
• v.55 no.10
• /
• pp.377-382
• /
• 2012

Purpose: This single-center study aimed to assess the clinical features and surgical approaches and outcomes of complete transposition of the great arteries (TGA). Methods: TGA patients who had undergone surgical correction at the Kyungpook National University Hospital from January 2000 to December 2010, were retrospectively evaluated for patient characteristics, clinical manifestation, preoperative management, intraoperative findings, postoperative progress, and follow-up status. Results: Twenty-eight patients (17 boys and 11 girls, mean age=$10.6{\pm}21.5$ days) were included and were categorized as follows: group I, TGA with intact ventricular septum (n=13); group II, TGA with ventricular septal defect (VSD, n=12); and group III, TGA/VSD with pulmonary stenosis (n=3). Group I underwent the most intensive preoperative management (balloon atrial septostomy and prostaglandin E1 medication). Group II showed the highest incidence of heart failure (P<0.05). Usual and unusual coronary anatomy patterns were observed in 20 (71%) and 8 patients, respectively. Arterial and half-turned truncal switch operations were performed in 25 and 3 patients (Group III), respectively. Postoperative complications included cardiac arrhythmias (8 patients), central nervous system complications (3 patients), acute renal failure (1 patient), infections (3 patients), and cardiac tamponade (1 patient), and no statistically significant difference was observed between the groups. Group II showed the mildest aortic regurgitation on follow-up echocardiograms (P<0.05). One patient underwent reoperation, and 1 died. The overall mortality rate was 4%. Conclusion: Our study showed favorable results in all the groups and no significant difference in postoperative complication, reoperation, and mortality among the groups. However, our results were inadequate to evaluate the risk factors for reoperation and mortality owing to the small number of patients and short follow-up duration.

• Genomics & Informatics
• /
• v.14 no.3
• /
• pp.104-111
• /
• 2016

Zika virus (ZIKV) is a mosquito borne pathogen, belongs to Flaviviridae family having a positive-sense single-stranded RNA genome, currently known for causing large epidemics in Brazil. Its infection can cause microcephaly, a serious birth defect during pregnancy. The recent outbreak of ZIKV in February 2016 in Brazil realized it as a major health risk, demands an enhanced surveillance and a need to develop novel drugs against ZIKV. Amodiaquine, prochlorperazine, quinacrine, and berberine are few promising drugs approved by Food and Drug Administration against dengue virus which also belong to Flaviviridae family. In this study, we performed molecular docking analysis of these drugs against nonstructural 3 (NS3) protein of ZIKV. The protease activity of NS3 is necessary for viral replication and its prohibition could be considered as a strategy for treatment of ZIKV infection. Amongst these four drugs, berberine has shown highest binding affinity of -5.8 kcal/mol and it is binding around the active site region of the receptor. Based on the properties of berberine, more similar compounds were retrieved from ZINC database and a structure-based virtual screening was carried out by AutoDock Vina in PyRx 0.8. Best 10 novel drug-like compounds were identified and amongst them ZINC53047591 (2-(benzylsulfanyl)-3-cyclohexyl-3H-spiro[benzo[h]quinazoline-5,1'-cyclopentan]-4(6H)-one) was found to interact with NS3 protein with binding energy of -7.1 kcal/mol and formed H-bonds with Ser135 and Asn152 amino acid residues. Observations made in this study may extend an assuring platform for developing anti-viral competitive inhibitors against ZIKV infection.

• Korean Journal of Cleft Lip And Palate
• /
• v.11 no.2
• /
• pp.49-58
• /
• 2008

The development of fetal surgery has led to promising options for many congenital malformations, such as congenital diaphragmatic hernia (CDH), obstructive uropathy, twin-to-twin transfusion syndrome (TTTS), and sacrococcygeal teratoma. However, preterm labor (PTL) and premature rupture of membranes continue to be uniquitous risks for both mother and fetus. To reduce maternal morbidity and the risk of prematurity, minimal access techniques were developed and are increasingly employed recently. Lift-threatening diseases as well as severely disabling but not life-threatening conditions are potentially amenable to treatment. Recently, improvement of video-endoscopic technology has boosted the development of operative techniques for feto-endoscopic surgery, which has been demonstrated to be less invasive than the open approach. Fetal surgery for repair of cleft lip and palate, a congenital anomaly which is not life threatening, is inappropriate until such time that the benefits are shown to outweigh the risks of both the procedure itself and preterm delivery. Further animal studies will be needed before intrauterine surgery for humans should be considered. For the better understanding of recent techniques and complications associated with fetal intervention of congenital facial defect patients, we reviewed recent related articles about the current knowledge and new perspectives of experimental fetal fetal surgery in the cleft lip and palate defects.

• Journal of Energy Engineering
• /
• v.22 no.3
• /
• pp.294-301
• /
• 2013

The accidents related to boilers are caused by defects with high risk which can lead to the explosion of the equipment. The number of boiler accidents from 1979 to 2006 is 100 andthe casualties totaled 379, and the scale of accidents has been growing larger every year. The analysis has found that the number of accidents caused by carelessness in management is 59, 72% of total 82 cases and 18by low level of water. The analysis of accidents in foreign countries showed a similar result. From the past till today most of the accidents have been resulted from bad handlingand maintenance. The analysis of accidents for the inspected boilers also showed that the major cause of the accidents was bad handling and maintenance of automatic controllers, safety devices, etc. And in the large-scale explosive accidents, the number one cause of them was the low level of water.