• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제15권1호
• /
• pp.5-16
• /
• 1979

At the holding of live anchovies which will be used as bait for the skipjack fishing, it is necessary to transrer the holding creel to the holding ground from the long distanted fishing ground. Usually, the creel made with net webbing and shaped like pound, was towed with a tow rope fastened to the front fringe or it, when two serious problems were found. The one was that the leading flap or the webbing of creel was drifted backward by the drag and caused to decrease the volume of the creel and made anchovies mortal. The other was that much time were spent to tow creels for long distance with slow speed, whereas to tow fast made anchovies worn out and caused them mortal. To prevent these defect, the authors carried out a model experiment in a circular flowing tank with a 1/15 scale model creel by four different arrangement of towing, and found out two suitable method, then these two methods were experimented in the sea with full rigged creel, and found the most suitable method out. To decrease the interior current speed of the creel even if it was towed fast, the apron which made by the same webbing of the creel body was enclosed the leading flap of creel, when the interior current speed showed the 35 to 40 percent of towing speed, whereas it showed 50 to 55 percent without apron.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권3호
• /
• pp.52-60
• /
• 2018

In the automobile industry, in order to increase the fuel efficiency and conform to the safety regulations, it is necessary to make the vehicles as light as possible. Therefore, it is crucial to manufacture dual phase steels, complex phases steels, MS steels, TRIP steels, and TWIP from high strength steels with a tensile strength of 700Mpa or more. In order to apply ultra-high tensile strength steel to the body, the welding process is essential. Resistance spot welding, which is advantageous in terms of its cost, is used in more than 80% of cases in body welding. It is generally accepted that ultra-high tensile strength steel has poor weldability, because its alloy element content is increased to improve its strength. In the case of the resistance spot welding of ultra-high tensile steel, it has been reported that the proper welding condition area is reduced and interfacial fracture and partial interfacial fracture occur in the weld zone. Therefore, research into the welding quality judgment that can predict the defect and quality in real time is being actively conducted. In this study, the dynamic resistance of the weld was monitored using the secondary circuit process variables detected during resistance spot welding, and the factors necessary for the determination of the welding quality were extracted from the dynamic resistance pattern. The correlations between the extracted factors and the weld quality were analyzed and a regression analysis was carried out using highly correlated pendulums. Based on this research, a regression model that can be applied to the field was proposed.

• Investigative Magnetic Resonance Imaging
• /
• 제1권1호
• /
• pp.154-161
• /
• 1997

Purpose: Traumatic rupture of the diaphragm is not easy to diagnose and often delayed. Delayed diagnosis of diaphragmatic rupture accompanied by higher chances of strangulation of herniated viscera which may result in higher morbility and mortality. The purpose of this study was to evaluate diagnostic accuracy of spiral CT, MRI and US for the diagnosis of diaphragmatic rupture in an animal model. Materials and Methods: Small, medium, and large sized transabdominal diaphragmatic ruptures were surgically made in experimental rabbits and then followed up with spiral CT, MR!, and US at 1 day, 3 day, and 1 week after operation. Results: US was superior to MR! or spiral CT in diagnosis of diaphragmatic rupture(P(0.05). The sensitivity and specificity were 94.4% and 92.9% for US, 54.0% and 85.7% for MRI, and 46.0% and 78.6% for spiral CT, respectively. The size of laceration was not related to diagnostic sensitivity in US. Sensitivity of MRI and spiral CT increased as the size of laceration were larger, but no statistical significance was present(P>0.05). All experimental animals developed pleural effusion or hemothorax one day after operation. In acute phase, US and MRI were more sensitive than spiral CT in detecting diaphragmatic rupture. Spiral CT was more sensitive than US and MRI in delayed phase but without statistical significance(P>0.05). In the experimental rabbits with accompanying visceral hernia through the diaphragmatic defect, diagnostic accuracy was found equally high among three image modalities(P>0.05). Conclusion: This study indicates that US is the most accurate diagnostic method in detecting injury to the diaphragm in a rabbit model. The findings obtained in this experimental study can be applied to the diaphragmatic rupture of human being.

• Childhood Kidney Diseases
• /
• 제13권2호
• /
• pp.153-160
• /
• 2009

Purpose : The intestinal mucosal defect has been known as one of the pathogenicmechanisms of IgA nephropathy. Oral antigens usually induce the activation of Th2 cells and mast cells. These cells secrete cytokines IL-4, IL-5 and TGF-$\beta$, which increase IgA production. Although ketotifen (benzocycloheptathiophene) is an H1 antagonist and a mast cell membrane stabilizer, it could protect the gastrointestinal membrane through inhibiting the production of IL-4, IL-5, PGE2, and LTB4, and decreasing the activity of nitric oxide synthease. Therefore, we have investigated if ketotifen may protect the development of IgA nephropathy with an oral antigen. Methods : ICR mice were used as an animal model orally with Poliovax only [ketotifen (-)], the other group was given oral ketotifen [ketotifen (+)] in addition to Poliovax. Results : Mesangial IgA deposition developed in 11 out of the 18 mice in the ketotifen (-) group, while in three out of the nine mice in ketotifen (+) group. The mesangial change developed in 16 out of the 18 mice in the ketotifen (-) group, while in five out of the nine mice in the ketotifen (+) group. Serum IL-4 and IL-5 levels were not significantly lower in the latter group than in the former. Conclusion : According to the statistical results from the above, ketotifen therapy would be beneficial to reducing mesangial changes in IgA nephropathy.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.9-12
• /
• 2008

The semi-rigid joint is the shape of middle that can supplement the defect of pin joints and accept the good point of rigid joints. Recently, a study on the pin joints is activated in the country, but because the study on semi-rigid joints is not many, this study tried to prove with producing test model of three shape. The test models are rigid joint HI-R, semi-rigid joint HI-S, pin joint HI-P. As a result of the test, respectively HI-R, HI-S, HI-P appeared shear failure of joint, flexure failure of the top fixing, flexure failure of the lower part slipping stair slab, and the maximum strength is measured to 51.74, 51.4, 24.63kN, the stiffness is appeared 1.58, 1.19, 0.37 respectively, The yield strength is respectively kept 44.5, 47.3, 24kN, and ductility ratio is appeared to 3.31, 2.32, 1.54, when is based on KBC code, sag of the acting service load is appeared that HI-P model is over the standard. When is based on distribution of bars strain ratio, HI-S seems similar behavior incipiently, but after the yield, the semi-rigid joint was able to be judged better than pin joint because of the stress allotment of joint internal elements.

• Journal of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.406-412
• /
• 1987

The electrical conductivities of ${\alpha}-Fe_2O_3$ containing 2.5 and 5.0mol% of cadmium were measured from 300 to $900^{\circ}C$ under oxygen pressures of 10$^{-7}$ to 10$^{-1}$ atmosphere. Plots of log ${\sigma}$ vs. 10$^3$/T show the extrinsic conductivity at oxygen pressure higher than $5{\times}10$^{-2}$atm. The transition points appear at about 550$^{\circ}$C and the activation energies are 1.34 eV for the intrinsic region and 0.50 eV for the extrinsic region on 5mol% Cd-doped ${\alpha}-Fe_2O_3$. The extrinsic conductivity disappears at oxygen partial pressures lower than $5{\times}10$^{-2}$ atm, and the intrinsic conductivity predominates. The electrical conductivities decrease with increasing mol% of cadmium doped. The predominant defect of ${\alpha}-Fe_2O_3$ doped with Cd is believed to be Fe${2+}$ interstitial for the intrinsic, however, oxygen vacancy predominates for the extrinsic region. The electrical conduction mechanisms are proposed and the conduction band model is suggested for the extrinsic region.

• Journal of Periodontal and Implant Science
• /
• 제48권5호
• /
• pp.305-316
• /
• 2018

Purpose: The aim of the present study was to evaluate the biocompatibility and barrier function of mussel adhesive protein (MAP)-loaded collagen membranes in guided bone regeneration (GBR). Methods: Eight male New Zealand white rabbits were used. Four circular defects (diameter: 8 mm) were created in the calvarium of each animal. The defects were randomly assigned to 1) a negative control group, 2) a cyanoacrylate (CA)-loaded collagen membrane group (the CA group), 3) a MAP-loaded collagen membrane group (the MAP group), and 4) a group that received a polycaprolactone block with MAP-loaded collagen membrane (the MAP-PCL group). Specimens were harvested at 2 weeks (n=4) and 8 weeks (n=4) postoperatively for observational histology and histometric analysis. Results: In the histologic analysis, MAP was completely absorbed without any byproducts. In contrast, some of the CA adhesive remained, showing an inflammatory reaction, at 8 weeks. In the MAP-PCL group, the MAP-loaded collagen membranes served as a barrier membrane despite their fast degradation in GBR. No significant difference was found in the amount of new bone between the MAP-PCL and MAP groups ($1.82{\pm}0.86mm^2$ and $2.60{\pm}0.65mm^2$, respectively). Conclusions: The MAP-loaded collagen membrane functioned efficiently in this rabbit calvarial GBR model, with excellent biocompatibility. Further research is needed to assess clinical applications in defect types that are more challenging for GBR than those used in the current model.

• Archives of Plastic Surgery
• /
• 제34권3호
• /
• pp.279-284
• /
• 2007

Purpose: The vein graft was considered as a useful conduit for nerve defect. But the problem is that it might be collapsed in long vein graft state. A new experimental model using vein graft filled with hyaluronic acid was considered. Methods: Thirty rats were used for the experimental animal. In group I, one side of the femoral nerve was exposed and a segment was removed about 15mm. The neural gap was connected with nerve graft. In group II, the nerve gap was connected with vein graft only. In group III, the nerve gap was connected with vein graft filled with hyaluronic acid. A walking track analysis was made periodically for 2 months and NCV(nerve conduction velocity) was executed at the end of the experiment. And morphologic studies were also done for all groups Results: In a walking track analysis, the toe-spread was widen and the foot-length was lengthened. The recovery of the toe-spread and foot length was checked 2 weeks interval, periodically for two months. The SFI (sciatic function index) was $-52.5{\pm}8.2$ in group I, $-68.1{\pm}4$ in group II, $-55.3{\pm}7.9$ in group III. In electrophysiological study, NCV(nerve conduction velocity) was $26.71{\pm}3.11m/s$ in group I, $17.94{\pm}4.35m/s$ in group II, $25.69{\pm}2.81m/s$ in group III. The functional recovery in group I and III was superior to that the group II statistically(p < 0.05) Under electromicroscopic study, the number of the myelinated axons were $1419.1{\pm}240$ in group I, $921.7{\pm}176.8$ in group II, $1322.2{\pm}318$ in group III. The number of the myelinated axons were much more in group I and III than group II statistically (p<0.05). Conclusion: This study suggested that the vein graft filled with hyaluronic acid is more effective than vein graft only for the conduit of the nerve gap. It was thought that the technique could be used in clinical cases with nerve defects as an alternative method to classical nerve grafts.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제13권5호
• /
• pp.121-133
• /
• 2013

Defect-free transfer service on the Next-generation wireless network extensive roaming mobile node (MN) to provide efficient mobility management has become very important. MIPv6(Mobility IPv6) is one of mobility management scheme proposed by IETF(Internet Engineering Task Force), and IPv6-based mobility management techniques have been developed in various forms. One of each management techniques, IPv6-based mobility management techniques for PMIPv6 (MIPv6) system to improve the performance of a variety of F-PMIPv6 (Fast Handover for Proxy MIPv6) is proposed. However, the F-PMIPv6 is cannot be excellent than PMIPv6 in all scenarios. Therefor, to select a proper mobility management scheme between PMIPv6 and F-PMIPv6 becomes an interesting issue, for its potenrials in enhancing the capacity and scalability of the system. In this paper, we develop an analytical model to analyze the applicability of PMIPv6 and F-PMIPv6. Based on this model, we design an Secure Smart Mobility Support(SSM) scheme that selects the better alternative between PMIPv6 and F-PMIPv6 for a user according to its changing mobility and service characteristics. When F-PMIPv6 is adopted, SSM chooses the best mobility anchor point and regional size to optimize the system performance. Numerical results illustrate the impact of some key parameters on the applicability of PMIPv6 and F-PMIPv6. Finally, SSM has proven even better result than PMIPv6 and F-PMIPv6.

• Journal of the Korean Wood Science and Technology
• /
• 제33권1호통권129호
• /
• pp.7-16
• /
• 2005

This study was carried out to evaluate the structural property of double shear bolted connections in Korean Larch. For the main member, sawn lumber and Glulam were used in which thickness of lumber is 39 mm, 89 mm, 139 mm, 189 mm and Glulam 80 mm, 140 mm, 170 mm. For the side member, sawn lumber and steel plate were used in which thickness of lumber is the same of the main member and steel plate is 6mm. And connections were jointed by M12, M16, M20 bolts which were usually used for wood constructions in Korea. Directions of loading to connections were perpendicular and parallel to grain of main and side member. First, through the dowel bearing test, the dowel bearing strength was evaluated and through the bolt bending tests, the bolt bending strength was evaluated. And then experiments for the connection were performed. Obtained results from experiments were compared with calculated values by EYM and analyzed. Strength of double shear bolted connections in Korean Larch was similar or higher than calculated value by EYM. Especially when the side member was made by the sawn lumber, it was similar to the calculated value. In failure mode, the mode was effected by the knot and the dry defect. In the thin main member, it was shown mode I and as the thickness of the main member was thicker, it was changed into mode III.