• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1013-1016
• /
• 2004

High level radioactive wastes, such as spent fuels generated from nuclear power plant, will be disposed in a deep geological repository. To maintain the integrity of the disposal canister and to carry out the process effectively, the emplacement process for the canister system in borehole of disposal tunnel should be well defined. In this study, the concept of the disposal canister emplacement process for deep geological disposal was established. To do this, the spent fuel arisings and disposal rate were reviewed. Also, not only design requirements, such canister and disposal depth but also preliminary repository layout concept were reviewed. Based on the requirements and the other bases, the canister emplacement process in the borehole of the disposal tunnel was established. The established concept of the disposal canister emplacement process will be improved continuously with the future studies. And this concept can be effectively used in implementing the reference repository system of our own case.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2819-2827
• /
• 2022

The disposal area of a deep geological repository (DGR) for the disposal of spent nuclear fuels (SNFs) is estimated considering the spacing between deposition holes and between disposal tunnels, as determined by a thermal analysis using the decay heat of a reference SNF. Given the relatively large amount of decay heat of the reference SNF, the disposal area of the DGR is found to be overestimated. Therefore, we develop a computer program using MATLAB, termed ACom (Assembly Combination), to combine SNFs when stored in canisters such that the decay heat per canister is evenly distributed. The stability of ACom was checked and the overall distribution of the decay heat per canister was analyzed. Finally, ACom was applied to disposal scenarios suggested in the conceptual design of a DGR for SNFs, and it was confirmed that the decay heat per canister could be evenly distributed and that the maximum decay heat of the canister could be much lower than that of a canister estimated using a reference SNF. ACom can be used to improve the disposal efficiency by reducing the disposal area of a DGR for SNFs by ensuringg a relatively even distribution of decay heat per canister.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4474-4480
• /
• 2022

Deep geological disposal using a multibarrier system is a promising solution for treating high-level radioactive (HLRW) waste. The HLRW canister represents the first barrier for the migration of radionuclides into the biosphere, therefore, the corrosion behavior of canister materials is of significance. In this study, the electrochemical behaviors of SS316L, Ti-Gr.2, Alloy 22, and Cu in naturally aerated KAERI underground research tunnel (KURT) groundwater solutions were examined. The corrosion potential, current, and impedance spectra of the test materials were recorded using electrochemical methods. According to polarization and impedance measurements, Cu exhibits relatively higher corrosion rates and a lower corrosion resistance ability than those exhibited by the other materials in the given groundwater condition. In the anodic dissolution tests, SS316L exposed to the groundwater solution exhibited the most uniform corrosion, as indicated by its surface roughness. This phenomenon could be attributed to the extremely low concentration of chloride ions in KURT groundwater.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4032-4038
• /
• 2023

Cu, which exhibits excellent corrosion resistance in underground environments, has been investigated as a canister material for use in the deep geological disposal of spent nuclear fuels. In this study, the technical viability of atmospheric plasma spraying for producing Cu-coated canisters was investigated. A high-purity Cu film (millimeter scale) was deposited onto a stainless-steel substrate using a plasma gun with a shroud structure. Potentiodynamic polarization studies revealed that the Cu film exhibited a sufficiently low corrosion rate in the groundwater electrolyte. In addition, no pitting corrosion was observed on the Cu film surface after accelerated corrosion studies. A prototype cylindrical Cu film was fabricated on a 1/20 scale on a stainless-steel tube to demonstrate the scalability of atmospheric plasma spraying in producing Cu-coated canisters.

• 방사성폐기물학회지
• /
• 제5권3호
• /
• pp.229-238
• /
• 2007

본 논문에서는 고준위폐기물 처분용기를 지하 심지층에 처분하기 위하여 요구되는 구조설계 요구조건과 구조안전성 평가 기준을 도출하였다. 고준위폐기물은 높은 열과 많은 방사능을 방출하기 때문에 고준위폐기물을 넣어 보관하는 처분용기는 그 취급에 많은 주의가 요구된다. 이를 위하여 고준위폐기물 처분용기는 장기간(보통 10,000년 동안) 안전한 장소에 보관되어야 한다. 보통 이 보관 장소는 지하 500m에 위치한다. 지하 깊은 화강암에 고준위폐기물을 보관하도록 설계되는 처분용기는 내부주철삽입물과 이를 감싸고 있는 부식에 강한 와곽쉘, 위 덮개와 아래 덮개로 구성되는 구조로 되어 있으며 지하수압과 벤토나이트 버퍼의 팽윤압을 받는다. 따라서 고준위폐기물 처분용기는 심지층에 보관 시 이들 외력들을 견디도록 설계되어야 한다. 만약에 발생 가능한 모든 하중조합을 고려한 처분용기 설계가 되지 않으면 심지층에 위험한 고준위폐기물 처분 시에 처분용기에 소성변형이나 크랙 또 좌굴같은 구조적 결함이 발생할 수 있다. 따라서 심지층에 처분용기를 처분 시에 처분용기에 발생하는 구조적 문제들이 발생하지 않게 하기 위하여 여러 가지 구조해석이 수행되어야 한다. 이러한 구조해석 수행에 앞서 처분용기 설계 타당성을 평가하기 위한 기준이 필요하다. 또한 평가기준에 영향을 미치는 설계요구조건(설계변수)이 명확히 검토되어야 한다. 따라서 본 논문에서는 처분용기의 구조설계 요구조건(설계변수)과 구조 안전성 평가기준을 도출하고자 한다.

• 방사성폐기물학회지
• /
• 제20권4호
• /
• pp.501-510
• /
• 2022

The nuclear criticality analyses considering burnup credit were performed for a spent nuclear fuel (SNF) disposal cell consisting of bentonite buffer and two different types of SNF disposal canister: the KBS-3 canister and small standardized transportation, aging and disposal (STAD) canister. Firstly, the KBS-3 & STAD canister containing four SNFs of the initial enrichment of 4.0wt% ²³⁵U and discharge burnup of 45,000 MWD/MTU were modelled. The k_eff values for the cooling times of 40, 50, and 60 years of SNFs were calculated to be 0.79108, 0.78803, and 0.78484 & 0.76149, 0.75683, and 0.75444, respectively. Secondly, the KBS-3 & STAD canister with four SNFs of 4.5wt% and 55,000 MWD/MTU were modelled. The k_eff values for the cooling times of 40, 50, and 60 years were 0.78067, 0.77581, and 0.77335 & 0.75024, 0.74647, and 0.74420, respectively. Therefore, all cases met the performance criterion with respect to the k_eff value, 0.95. The STAD canister had the lower k_eff values than KBS-3. The neutron absorber plates in the STAD canister significantly affected the reduction in k_eff values although the distance among the SNFs in the STAD canister was considerably shorter than that in the KBS-3 canister.

• 자원환경지질
• /
• 제56권4호
• /
• pp.421-433
• /
• 2023

원자력발전소의 사용후핵연료(Spent Nuclear Fuel: SNF)에 대한 최종처분은 지하 심부의 지질학적 저장소에서 이루어진다. 사용후핵연료를 감싸는 금속처분용기는 주철과 구리 등으로 제작되어 방사성핵종을 장기간 격리할 예정이며, 공학적방벽과 천연방벽으로 구성된 다중방벽처분시스템에 의해 보호를 받도록 설계된다. 지하 심부의 환경(심층처분환경)은 점차 무산소의 환원환경으로 바뀌게 되며, 이러한 환경에서 구리처분용기의 부식을 일으킬 수 있는 유력한 물질 중 하나는 황화물이다. 황화물에 의한 응력균열부식은 구리처분용기의 안정성을 크게 저하시켜 처분장의 장기안전성에 큰 영향을 미칠 수 있다. 심층처분환경에는 황산염이 다양한 형태로 존재 또는 유입될 수 있으며, 황산염환원미생물에 의해 황화물로 전환되어 구리처분용기의 부식에 기여할 수 있다. 완충재와 뒤채움재의 유력한 후보물질인 벤토나이트에는 주로 석고(CaSO₄)와 같은 산화형태의 황산염 광물이 포함되어 있다. 심층처분환경 내에 미생물이 생장할 만한 공간이 있고 유기 탄소 등 전자공여체가 충분히 공급된다면 미생물 활동에 의해 황산염이 황화물로 환원될 수 있다. 하지만 근계영역에서 생성된 황화물과 지권으로부터 유입되는 황화물 중 대부분은 완충재에 의해 차단되어 극히 일부만이 처분용기에 도달할 것이다. 처분환경에서 존재가능한 황화철 광물 중 하나인 황철석은 용해과정에서 황산염을 발생시켜 구리처분용기의 부식에 기여할 수 있다. 하지만 황철석의 극히 낮은 용해도로 인해 산화 생성물의 양은 매우 적을 것이고 포화된 벤토나이트의 낮은 수리전도도로 인해 처분용기로 산화 생성물의 이동은 제한될 것이다. 우리는 심층처분환경에서 황산염의 존재와 환원 그리고 황화물과 황철석의 형성 및 거동 특성 등에 관한 주요 연구 사례 등을 종합적으로 분석, 정리하였고, 고준위방사성폐기물 처분장의 장기안전성에 대한 황산염과 황화물의 영향을 이해하고자 하였다.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1540-1554
• /
• 2023

To use nuclear energy sustainably, spent nuclear fuel, classified as high-level radioactive waste and inevitably discharged after electricity generation by nuclear power plants, must be managed safely and isolated from the human environment. In Korea, the land area is limited and the amount of high-level radioactive waste, including spent nuclear fuels to be disposed, is relatively large. Thus, it is particularly necessary to maximize disposal efficiency. In this study, a high-efficiency deep geological repository concept was developed to enhance disposal efficiency. To this end, design strategies and requirements for a high-efficiency deep geological repository system were established, and engineered barrier modules with a disposal canister for pressurized water reactor (PWR)-type and pressurized heavy water reactor type Canada deuterium uranium (CANDU) plants were developed. Thermal and structural stability assessments were conducted for the repository system; it was confirmed that the system was suitable for the established strategies and requirements. In addition, the results of the nuclear safety assessment showed that the radiological safety of the new system met the Korean safety standards for disposal of high-level radioactive waste in terms of radiological dose. To evaluate disposal efficiency in terms of the disposal area, the layout of the developed disposal areas was assessed in terms of thermal limits. The estimated disposal areas were 2.51 km² and 1.82 km² (existing repository system: 4.57 km²) and the excavated host rock volumes were 2.7 Mm³ and 2.0 Mm³ (existing repository system: 4.5 Mm³) for thermal limits of 100 ℃ and 130 ℃, respectively. These results indicated that the area and the excavated volume of the new repository system were reduced by 40-60% compared to the existing repository system. In addition, methods to further improve the efficiency were derived for the disposal area for deep geological disposal of spent nuclear fuel. The results of this study are expected to be useful in establishing a national high-level radioactive waste management policy, and for the design of a commercial deep geological repository system for spent nuclear fuels.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.470-473
• /
• 2005

Spent nuclear fuels are regarded as a high level radioactive waste and they will be disposed in a deep geological repository. To maintain the safety of the repository for hundreds of thousands of years, the spent fuels are encapsulated in a disposal canister and the canister containing spent fuels should have the structural integrity and the corrosion resistance below the several hundreds meters from the ground surface. In this study, the concept of the spent fuel encapsulation process and the process equipment fur deep geological disposal were established. To do this, the design requirements, such as the functions and the spent fuel accumulations, were reviewed. Also, the design principles and the bases were established. Based on the requirements and the bases, the encapsulation process and the equipment from spent fuel receiving process to transferring canister into the underground repository including hot cell processes was established. The established concept of the spent fuel encapsulation process and the process equipment will be improved continuously with the future studies. And this concept can be effectively used in implementing the reference repository system of our own case.

• 방사성폐기물학회지
• /
• 제6권3호
• /
• pp.217-224
• /
• 2008

사용후핵연료 심지층처분에 있어서 처분용기의 건전성 확보는 내부에 적재되어 있는 사용후핵연료로부터 방사성물질이 누출되는 것을 방지하고 격리하여 처분장의 안전성을 보증하기 위한 필수적인 인자이다. 이러한 처분용기는 심지층 처분의 목적인 방사성 독성이 인간 및 자연환경에 영향을 미치지 않도록 장기간 동안 격리하고 누출을 지연시키기 위한 공학적 방벽의 중요한 요소 중의 하나이다. 심지층 처분장 설계시 주요한 요건은 처분시스템의 안전성을 유지를 위하여 처분용기에 적재되어 있는 폐기물로부터 발생된 붕괴열로 인하여 완충재의 온도가 100$^{\circ}C$를 넘지 않도록 하는 것이다. 또한, 처분용기는 지하 심부 500 m 깊이에서의 수압과 완충재의 팽윤압 등 하중에 구조적 건전성을 유지하여야 한다. 본 연구에서는 직접 처분대상으로 고려하고 있는 중수로(CANDU) 사용후핵연료에 대한 처분용기의 개선된 개념을 설정하고, 심지층 처분환경에서의 열적 및 구조적 안정성을 분석하였다. 열적 안정성 해석결과 처분터널 및 처분공 간격이 40 m, 3 m 인 경우 처분 후 37년이 경과한 후에 처분용기 표면온도가 최고 온도에 도달하며, 이때 온도는 88.9$^{\circ}C$로서 처분장 온도제한 요건(100$^{\circ}C$)에 만족하였다. 또한, 정상적인 경우와 극 상황에 따른 하중에 대한 처분용기 구조해석 결과 안전율은 각각 2.9와 1.33 으로 나타나 심한 지층 처분환경에서 처분용기는 구조적 건정성을 유지하는 것으로 판단되었다.