• 한국정밀공학회지
• /
• 제28권4호
• /
• pp.463-473
• /
• 2011

The warm shrink fitting process is generally used to assemble automobile transmission parts (shaft/gear). But the fitting process can cause the dimensions of addendum and dedendum of the gear to change with respect to the fitting interference and the profile of the gear. As a result, there may be additional noise and vibration between gears. To address these problems, we analyzed the warm shrink fitting process according to process parameters; the fitting interference between the outer diameter of the shaft and the inner diameter of the gear, the inner diameter of the gear, addendum and dedendum of the gear, the heating temperature. In this study, a closed form equation for predicting the amount of deformation of addendum and dedendum in the R-direction was proposed. And the FEA method to analyze the cooling process was proposed for thermal-structural-thermal coupled field analysis of the warm shrink fitting process (heating-fitting-cooling process).

• 한국안전학회지
• /
• 제12권4호
• /
• pp.39-46
• /
• 1997

This study describes a computer aided design system on involute gear for power transmition. Input data for gear design are pressure angle $20^{\circ}$, transmitted power, gear volume, gear ratio, addendum ratio of rack, dedendum ratio of rack, edge radius of rack, allowable contact stress and allowable bending stress etc. Bending strength contact strength and scoring are considered as the design constraints. Method of optimization developed this study. The developed gear design system can design the optimized gear that minimize the number of pinion teeth with face tooth.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.572-578
• /
• 1985

본 논문에서는 인벌류우트와 원고치형의 단점을 보완하고 양자의 장점을 취한 치형을 얻기위하여 피치점 부근에서는 인벌류우트치형으로 이끝부분에서는 원호로 하 고 이뿌리부분에서는 상대방 기어의 원호부분과 맞물릴 수 있는 곡선으로 하는 치형을 합성하고, 이 합성치형의 유효치형을 가공할 수 있는 랙치형을 이론적인 방법으로 구 하였다. 그리고, 이 합성치형의 유효치형에 대한 이끝과 이뿌리 두께의 변화와 물림 률을 검토하였다.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.118-124
• /
• 2016

In this paper, the model to develop the forming process for turbine seal is suggested. And numerical approach for the shape design of the turbine seal is examined. Because of the thin thickness of the turbine seal, the seal is easily fractured in the manufacturing process. The main factors of the seal manufacturing consist of addendum angle and dedendum angle, fillet on the addendum face, number of the gear teeth, sheet initial location and gear initial location, rake and vertical clearance. The structure and shape of seal are modeled using the commercial 3D mechanical design program, CATIA(V5/R20). Also, rolling process to manufacture the turbine seal is analyzed using DEFORM$^{TM}$-3D(V11), commercial forming analysis software and runs under PC workstation. This study focused on the shape design of turbine seal. Through this research, the main factors to make the turbine seal for airplane turbine engine can be obtained. This study results are reflected to the shape design for turbine seal.

• Tribology and Lubricants
• /
• 제11권5호
• /
• pp.136-143
• /
• 1995

The effect of additive chemistry on the serface fatigue of gears was investigated using the FZG gear tester and fluids based on an API GL-5 grade oil. Surface fatigue lives were determined as a function of load and additive chemistry. At 1.52 GPa, the removal of the primary extreme pressure additive (EP) from the fully formulated gear oil decreased the fatigue life of gears slightly (4%), however, the removal of the primary antiwear additive (AW) decreased the fatigue life of gears significantly (83%). At 1.86 GPa, the removal of the EP additive from the fully formulated gear oil decresed the gear fatigue life 27%, however, the removal of the primary AW additive decreased the fatigue life of gears significantly (75%). Micropitting was the dominant surface morphology in the dedendum of gears tested With two oils at load stage: one using the complete additive package, and a second where the EP additive has been removed. However, spalling is the primary failure mode of gears tested without an AW additive independent of whether an EP agent was present. Surface analysis of pinion gears showed the formation of a mixed phosphate/phosphite-oxide layer on the surface of gears tested with fluids containing an AW. Formation of this layer seems to be key to long fatigue life.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.296-303
• /
• 1987

본 논문에서는 동력전달용 기어에 주로 쓰이는 물림률 1.3 이상일 때, 치면접 촉응력과 공칭굽힘응력이 작게되는 풀림각 1˚로 고정하여 잇수 30∼100개 압력각 14˚∼30˚의 범위에서 최소 원호반경식과 치형 조건을 만족하는 최대 원호반경식에 대하여 고찰하였다.

• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.198-204
• /
• 1987

본 논문에서는 전보에서 창성된 인벌류우트-원호합성치형기어에 있어서 Hertz 식에 의하여 치면접촉응력을 구하고 유한요소법에 의하여 이뿌리응력을 계산하였다. 그리고 같은 제원의 표준 인벌류우트 치형기어와 비교하였다.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.1-10
• /
• 1993

본 연구에서는 치차의 소음은 근본적으로 치형에 관계된 것으로 생각하여 치 차소음을 감소시키기 위해 제시한 방법에 적합한 치형, 즉 물림률을 증가시킬 수 있고 동시에 치형수정의 효과를 나타내며, 미끄럼률.치면접촉응력.이뿌리응력이 작은 인벌 류트-사이클로이드 하벙치형을 유효치형으로 하여 저소음 치차의 치형을 치차의 소음 을 감소시키기에 적절한 치형설계조건을 설정하여 설계한다. 설계한 합성치형치차의 소음저감성능을 확인하기 위해 치형을 생성시키는 컴퓨터프로그램의 치형데이터를 이 용하여 합성치형치차, 인벌류트치차, 그리고 사이클로이드치차를 NC Wire Cutting Ma- chine으로 가공하고 각 치차에 대해 소음측정실험을 하여 소음레벨을 비교검토한다.