• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.1
• /
• pp.27-33
• /
• 2016

A numerical analysis on deck wetness is carried out for a large caisson directly wet-towed by tugs in irregular waves. A constant panel method is used for linear analysis in frequency domain and a statistical post-processing for the deck wetness is presented. Hydrodynamic coefficients obtained from the frequency domain computation are imported for time domain analysis which enables complete modeling for towing equipment, environment, etc. Both frequency and time domain computations over two sea states are performed and comparison is made. In the time domain analysis, towing systems of various arrangements of tugs are investigated from short-term prediction for the largest deck wetness and the number of occurrences of deck wetness.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.41-46
• /
• 2010

This paper deals with the problem of developing a new decision procedure for the freeboard of a coastal chemical tanker going on the coast. The decision procedure is mainly constructed with the algorithm of estimating statistically the time period that deck wetness will last on the deck of the ship. Deck wetness is one of the most important safety factors for sailing of a coaster. It generally means the situation in which the amplitude of the relative motion between the deck and the surface of the wave exceeds the freeboard. Therefore, in this paper, we proposed that the time during which the amplitude remains above the level of the freeboard should be appraised on the basis of statistical theory. A series of numerical calculations were executed for four different coastal chemical tankers (199G/T Type II, III & 499G/T Type II, III). It was demonstrated that the present decision procedure of freeboard is practical for planning the type of coaster sailing in the sea.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.8-14
• /
• 2004

As the number of offshore structure is glowing in deep waters, there have been increased damages of it. These floating structures in offshore locations exposed to harsh environmental conditions. In recent years, there has been a slowing attention around damages on bow and deck on FPSO caused by waves in steep storm condition. This paper describes a study of the water on deck due to the dynamic behavior of a FPSO with turret mooring system. The nonlinear motions of the FPSO are simulated under external forces due to wave, current, wind, and mooring forces in the time domain. The direct integration method is employed to estimate low frequency drift wave forces. The current forces are calculated by using slow motion maneuvering equations in the horizontal plane. The coefficients of a model for wind forces are calculated from Isherwood's experimental data and the variation of wind speed is estimated by wind spectrum according to the guidelines of API-RP2A.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.47-52
• /
• 2010

In this paper, the shapes of windsurfing boards are proposed for the promotion of their public utilization. Initially, we investigated the principal dimensions of 1,500 windsurfing boards that were produced in the last six years to categorize the characteristics of the boards. Then, model tests were performed in a circulating water channel to determine the resistance characteristics and the flow phenomena, including the wetness of the decks. After analyzing the principal dimensions and the results of the tests of existing windsurfing boards, we proposed four public board shapes that resulted from changing the shapes of the nose and rail and protecting the deck of free-ride boards from wetness. Finally, we predicted the performance of the four proposed windsurfing boards.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.1 no.1
• /
• pp.37-44
• /
• 1993

Deck wetness phenomenon has long been considered as one of the factors that degrade the performance of a ship In waves. In rough weather, the frequent skipping of water may give rise to the capsizing of the ship. Therefore an appropriate above water bow shape design is an important asset to a ship of which successful performance in rough weather is a prerequisite such as a warship. In this paper an experimental technique for estimation of deck-wetness frequency is presented. The results of the model tests are compared with those of computations using Ochi's formula. Finally the applicability of Ochi's formula is discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.71-80
• /
• 1992

The Seakeeping committee of Korea Towing Tank Conference executed the cooperative experimental study on deck wetting phenomena using S-175 contatiner model ships. Two members, Korea Research Institute of Ships and Ocean Engineering(KRISO) and Hyundai Maritime Research Institute(HMRI) participated in the study. This study was initiated by the ITTC(International Towing Tank Conference) Seakeeping Committee as the cooperative study of the 19th ITTC aiming at the establishement of the model test procedure on the deck wetting phenomena. Special emphasis was made on the determination of reliable record length for experimental measurement on rarely occurring events(such as deck wetness, slamming etc). Comparisons were made on both the test results and the test procedrues in this research. The measured frequencies of deck wetting show remarkable deviations between the runs. This fart implies that sufficiently long record length is required in the deck wetness measurement compared to the conventional ship motion tests. Careful considerations were made on the physical interpretation of the deck wetting phenomena, the correlation between the measured relative motion at stemhead and the measured deck wetness, and the estimation of deck wetting frequencies by Poisson process.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.45-49
• /
• 2001

The length and the breadth or a very large floating airport are determined by airplane types and airport facilities. However, the depth affect not only the structural strength but also the functional requirement such as a possibility of taking off and landing. The optimization problem for determining the depth is to select a design so that the cost is minimized. In this paper, a general arrangement and a method to decide the depth are proposed. Strength, functional requirement, and possibility of occurrence of deck wetness and slamming are considered in order to determine the depth of structure. Hydrodynamic forces of the diffraction and radiatin problems are predicted by applying the source-dipole distribution method, and the structural responses are obtained by the finite element method.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.31-39
• /
• 1990

Deck wetness phonomena has long been considered as one of the factors that degrade the performance of a ship in waves. In rough weather, the frequent shipping of water may give rise to the capsizing of the ship. Therefore an appropriate above water bow design is an improtant assert to a ship of which successful performance in rough weather is a prerequisite such as a warship. In this paper the experimental technique for estimation of deck wetness frequency is presented. The results of the model tests are compared with those of calculation using Ochi's formula. Finally the applicability of Ochi's formula is discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.867-873
• /
• 2011

The transportation of a truss-spar hull from a transport barge of 6000 ton topside module on the spar hull is investigated in the present study. Two possible routes from a fabrication yard in Teeside, England to the Gulf of Mexico are considered in the paper. The results of motion responses of the transport barge obtained from a spectral analysis and the limiting criteria of sea fastening, deck wetness and lateral acceleration are compared and the route selection is discussed. Long-crested waves and short-crested seas as well as the joint probabilities of significant wave heights and wave periods in different sea areas are considered. Generally speaking, the results for long-crested seas are higher than those for short-crested waves.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.6 no.1
• /
• pp.35-45
• /
• 2000

The slipway, which is one of stern construction, is necessary for stern trawler to let fishing implements, such as fishing net, otter board and warp, go out effectively. It may be doubtable whether there is any possibility for deckwetness to occur because the slipway is obliquely in contact with sea surface. The author discusses any possibility for deckwetness through slipway of stern trawler in wind and waves. A 350 G/T class, ocean-going stern trawler is adopted for the present study. The stem trawler is particularly assumed to drift with fishing implements hung down the slipway due to internal or external accident during fishing operation in real sea. The author considers two factors as possibility for deckwetness to occur through slipway. One is mooring effect of fishing implements hung down the slipway under wind pressure, and the other is relative ship motion in vertical direction in waves. Through the numerical calculation, the author clarifies that there is thin possibility for deckwetness to occur from above two points of view.