• 대한토목학회논문집
• /
• 제30권1A호
• /
• pp.71-80
• /
• 2010

교량 바닥판은 차량하중 및 환경 등의 영향을 직접 받는 부재여서 열화손상에 취약하므로 이에 대한 적절한 보수 및 보강이 필요하다. 그러므로 교량 바닥판의 유지관리를 최소화하고 교량의 설계수명까지의 공용을 위해서는 현재의 바닥판 성능을 개선한 고강도, 고내구성의 바닥판 개발이 필요하다. 따라서 본 연구에서는 기존의 철근콘크리트 바닥판의 문제점을 보완하여 새롭게 개발된 강-콘크리트 합성바닥판의 피로성능을 평가하기 위하여 정적실험을 실시하고, 이를 토대로 피로하중을 선정하고 일정진폭 반복하중 하에서 피로실험을 실시하였다. 이로부터 합성바닥판의 주요 구조상세의 S-N 곡선을 작성하고, 이를 피로설계기준과 비교, 평가하여 피로거동 특성을 규명하고 피로설계지침을 제시하였다. 그 결과 본 연구에서 제안된 합성바닥판의 각 구조상세인 절곡강판 상부플랜지 및 절곡강판 중간부, 전단연결재 및 절곡강판 하부플랜지는 모두 충분한 피로강도를 확보하고 있는 것을 알 수 있었다.

• 대한조선학회지
• /
• 제13권4호
• /
• pp.19-24
• /
• 1976

Some method of analysis of rectangular plates under distributed load of various intensity with all edges built in are presented in. Analysis of many structures such as bottom, side shell, and deck plate of ship hull, and flat slab, deck systems of bridges is a problem of plate with continuous supports or clamped edges. When the four edges of rectangular plate is simply supported, the double fourier series solution developed by Navier can represent an exact result of this problem. If two opposite edges are simply supported, Levy's method is available to give an "exact" solution. When the loading condition and boundary condition of a plate does not fall into these cases, no simple analytic method seems to be feasible. Analysis of a plate under distributed loads of various intensity with all edges built in is carried out by applying Navier solution and Levy's method as well as "Principle of Superposition" In discussing this problem we start with the solution of the problem for a simply supported rectangular plate and superpose on the deflection of such a plate the deflections of the plate by slopes distributed along the all edges. These slopes we adjust in such a manner as to satisfy the condition of no rotation at the boundary of the clamped plate. This method can be applied for the cases of plates under irregularly distributed loads of various intensity with two opposite edges simply supported and the other two edges clamped and all edges simply supported and this method can also be used to solve the influence values of deflection, moment and etc. at arbitrary position of plates under the live load.

• 한국기계연구소 소보
• /
• 통권16호
• /
• pp.127-136
• /
• 1986

Recently deck crane of multi purpose cargo vessel (MPCV) is designed to posi¬tion in side instead of in the center line of the upper deck with a view to reduce the transportation cost and shipbuilding cost by shortening the length of ship. In this paper, the crane post was at first designed according to the crane maker’s specification and parent ship and the structure is analysed with Finite Ele¬ment Method. Through the careful reviews on the result of analysis, the final design of crane post was modified. The crane post is designed as a cylindrical in upper part and hexagonal in lower part instead of cylindrical on the whole as before. The connecting part of crane post is designed with the form of mixture of the cylinderical and hexagonal. Since the center of cylindrical and hexagonal section are not on the same line, it is expected to have the stress concentration. So, in order to attenuate the concentrated stress on the connecting part, the upper and lower parts was stiffened by inserting plate to enlarge the area of welding. The structure of deck part includes the tank side floor which is depend on the lower structure of the crane post that would support the force of the crane post by placing with 1.5 frame interval of the vertical plate.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.11-18
• /
• 2008

본 논문은 하중재하시 강상판교의 방수층과 교면포장에서 발생하는 거동을 유한요소해석을 통하여 분석하였다. 포장표면에 연직방향으로 작용하는 차량하중과 수평방향으로 작용하는 차량의 제동하중의 크기에 따른 포장체와 방수시트에 발생되는 응력을 산정하였다. 그리고 강상판 두께 및 강성. 포장층 두께, 차량제동하중, 온도 등의 변수가 포장체의 응력변화에 어떠한 영향을 미치는지에 대하여 분석하였다. 방수층의 전단응력은 강상판의 두께가 얇아지고 강성이 감소할수록 증가하였으며, 강상판의 두께가 150mm이상의 경우와 탄성계수가 $2{\times}10^{5}MPa$이상의 경우에는 그 영향이 미비하였다 또한 교면 포장의 두께가 얇아지고 온도가 낮아질수록 방수층의 전단응력이 증가하였다. 포장체 하부에서 발생하는 인장변형률은 고온에서 최대가 되었으며 두께가 증가할수록 감소하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.41-50
• /
• 2012

강재의 품질향상으로 강교에 있어서 재료자체의 파괴보다는 반복하중에 의한 피로균열 문제가 더욱 중요한 요소가 되었다. 재료의 항복으로 인한 교량의 붕괴 등의 사례는 거의 보고되고 있지 않지만 용접부에 발생하는 피로균열에 대한 사례는 매우 많이 보고되고 있다. 종리브와 횡리브, 데크 플레이트로 구성된 직교이방성 강바닥판의 피로응력은 강바닥판을 구성하는 요소들의 구성 형태 및 물성과 밀접한 관련이 있다. 본 논문에서는 Pelikan-Esslinger method와 signed Von-Mises 등가응력 개념을 활용하여 직교이방성 강바닥판의 피로응력을 산정하는 방법을 제시하고, 직교이방성 강바닥판 구성요소들의 구성형태와 물성을 변화시켜 피로응력에 미치는 영향을 분석하였다. 직교이방성 강바닥판의 피로응력과 구성요소의 상관관계 경향을 분석함으로써 설계 및 유지보수 시에 더 효율적인 대안을 찾는데 도움이 될 수 있을 것이다.

• 건설안전기술
• /
• 통권50호
• /
• pp.84-96
• /
• 2009

Road is typically constructed along ridge area of mountain because of topographical and economic reasons. Therefore, road may face lots of open cut slope which can easily cause rock falling. This study evaluates the structural safety of newly developed falling rock protection system which has a roof deck plate. The structural performance under self-weight, snow load and load from failing rock was investigated using a finite element numerical analysis method. From the analysis results, the H-beam space was limited not to exceed 2.2m. The deck plate was also safe under the examined loading condition. A hinge and connection in the system were investigated through detailed modelling and analysis. The results showed that the hinge was safe enough and that the connection should strengthened with appropriate stiffeners.

• Wind and Structures
• /
• 제6권4호
• /
• pp.263-278
• /
• 2003

This study investigates the effects of a bridge deck's width-to-depth (B/H) ratio and turbulence on buffeting response and flutter critical wind speed of long-span bridges by conducting section model tests. A streamlined box section and a plate girder section, each with four B/H ratios, were tested in smooth and turbulent flows. The results show that for the box girders, the response increases with the B/H ratio, especially in the vertical direction. For the plate girders, the vertical response also increases with the B/H ratio. However, the torsional response decreases as the B/H ratio increases. Increasing the B/H ratio and intensity of turbulence tends to improve the bridge's aerodynamic stability. Experimental results obtained from the section model tests agree reasonably with the calculated results obtained from a numerical analysis.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.47-53
• /
• 2009

Road is typically constructed along ridge area of mountain because of topographical and economic reasons. Therefore, road may face lots of open cut slope which can easily cause rock falling. This study evaluates the structural safety of newly developed falling rock protection system which has a roof deck plate. The structural performance under self-weight, snow load and load from falling rock was investigated using a finite element numerical analysis method. From the analysis results, the H-beam space was limited not to exceed 2.2m. The deck plate was also safe under the examined loading condition. A hinge and connection in the system were investigated through detailed numerical modelling and analysis. The results showed that the hinge was safe enough and that the connection should strengthened with appropriate stiffeners.

• 수산해양교육연구
• /
• 제12권1호
• /
• pp.22-82
• /
• 2000

The ship hull construction materials of fishing boat has changed in order that wooden, steel, and fiber glass reinforced plastic(FRP). The fishing boat made from FRP has increased every year because that materials has proved excellent of the characteries for fishing boats construction members. Recently, FRP tend towards evasion for the pollution of air enviroment. Therefore. the materials of fishing boat construction must be exchanged by another one. Aluminium alloys must be recommended for fishing boats construction mateials because that is light weight and corrosion resisting in the sea water. Regulation of the standard of ship hull construction for aluminium alloys fishing boats did not enact laws in the interior now. Therefore, this regulation was studied by the following items. that is Rudder, Bottom construction, Side hull plate construction, Deck plate construction, piller. Water tight bulkhead, Deep tank, Fish tank, Stern construction, Superstructure, Deck house construction, Hatch, Engine room opening, Hatch opening, Bulwark, Welding and Rivet etc. A study on the regulation will be contributed to enact laws for fishing boat construction of aluminium alloys.

• 대한건축학회논문집:구조계
• /
• 제35권6호
• /
• pp.101-109
• /
• 2019

The purpose of this study is to improve a general Top-Down construction process for superstructure construction period reduction. In a general Top-Down construction sequence, the ground floor slab is set up first. Subsequently, 1st basement level construction including core walls is constructed. Initiation of the ground level superstructure gets waited until then. In this study, removable deck plate installation on the bottom of the core walls of ground level is preceding the concrete casting, therefore, ground level superstructure construction is able to get started earlier. Up to first typical floor concrete casting, total of seventy-two working(calendar) days will be resulted in a reduction from the total construction periods.