토마토 'Tabor' 품종의 파렛트 단위 MAP 적용 연구 (Development of pallet-scale modified atmosphere packaging for 'Tabor' tomatoes)
-
- 한국식품저장유통학회지
- /
- 제23권5호
- /
- pp.614-622
- /
- 2016
본 연구에서는 수출용 토마토의 파렛트 단위 MAP를 통한 저장 및 유통 가능성을 분석하고 미생물 생육 및 토마토의 품질에 미치는 영향을 분석하고자 하였다. Turning 단계에서 수확된 Tabor 토마토를 박스 포장한 후 제작된 MAP 파렛트에 적층하고 나일론 필름을 이용하여 포장하여 혼합기체를 주입하여 초기 기체조성(5%
Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.
(U-Th)/He 연령측정법은 자연상에 존재하는
순환관개는 농업유역내 하천수를 상류의 농경지로 재투입시켜 관개용수로써 활용하고 기 사용된 용수는 직접유출 또는 기저유출의 형태로 하천으로 회귀되는 관개방식이다. 순환관개는 용수 및 양분 확보 측면에서 장점이 크지만 순환관개 후 발생하는 회귀수는 과투입된 양분을 함유하고 있어 하천 수질에 악영향을 미칠 것으로 예상된다. 따라서 순환관개에 따른 하천 수질변화에 대한 정량적 분석은 효율적인 농업용수 공급과 수질관리대책 수립을 위해 반드시 필요하다. 유역내 수문 및 오염물질의 순환, 그리고 하천수질에 대한 정량적 영향을 통합적으로 분석하기 위하여 유역모델이 주로 활용되고 있으나 대부분의 유역모델들은 순환관개에 의한 수질 영향을 모의할 수 있는 기능을 제공하고 있지 않다. 이에 본 연구에서는 HSPF(Hydrological Simulation Program-Fortran) 유역모델과 다중 저류지 모델(Multi-reservoir model)을 연계하여 순환관개 시스템 운영에 따른 하천수질 영향을 분석하고자 하였다. 연구 대상 지역은 경상남도 창녕군 계성천 유역내 순환관개를 시행하고 있는 관곡천 소유역으로 농업활동에 의한 오염물질 배출이 주된 지역이다. 먼저 계성천 및 관곡천을 대상으로 구축된 HSPF모델을 활용하여 관개지역에서의 배출수(직접유출 및 기저유출) 및 하천수에 대한 연간 유량 및 수질 변화 시계열 자료를 생성하고 이를 토대로 자체 구축한 다중저류조 모델을 보정한 후 순환관개 모의에 사용하였다. 다중 저류지 모델에서 관곡천 유역을 관개지역과 관곡천 등 두 개의 하위시스템으로 구성하고 순환관개에 따른 하위시스템내 반응(식물흡수, 흡탈착, 및 소멸) 및 하위시스템 간 물 및 물질(질소 및 인)전달 관계를 모의할 수 있도록 하였다. 최종적으로 순환관개 운영 유무에 따라 총 3개의 시나리오를 구성하여 연간 순환관개용수량 변화에 따른 관곡천 수질영향을 분석하였다.
초분은 살이 다 썩어 없어질 때까지 관에 넣은 시신을 짚으로 싸두는 초가 형태의 임시 무덤을 말한다. 모든 살이 다 없어지고 나면, 초분은 해체되고, 뼈만 추려 다시 묻는다. 이러한 방식의 초분은 따라서 처음 시신의 살을 처리하기 위한 임시 매장과 이후 남은 부분(뼈나 재)을 영구히 매장 하는 이중장제에 속한다. 초분은 사람이 잘 가지 않고, 집에서도 떨어져 있지만, 유족이 가서 돌볼 수 있는 곳을 택해 만들어지는데, 심리학적으로 이것은 지속적인 관심을 쏟을 수 있으면서도 고요히 격리될 수 있는 곳, 다시 말해 심리적인 재생이 일어나는 장소이다. 초분을 두는 기간, 일차장의 기간을 정하는데 가장 중요한 점은 뼈만 남길 때까지 기다려야 하는 기간이 얼마나 되는지, 그리하여 초분을 해체하였을 때 완전한 뼈 상태를 확인할 수 있는지와 관련된 것이다. 여기서 초분이 부패와 뼈로의 환원을 목표로 하고 있음을 알 수 있다. 부패와 새로운 생명의 탄생은 연금술 문헌에서 보듯 동시에 일어난다. 부패의 최종 목적은 육신을 영적 상태로 만들고, 그리하여 죽은 자를 다른 삶으로 들어갈 수 있게 만들어 주는 것이다. 그러기 위해서는 아주 불안정한 상태에서, 부패를 견뎌내고, 썩는 냄새가 모두 사라지는 것을 기다려야 한다. 썩히는 것은 그리하여 육화된 세계, 몸을 용해시켜 없애고, 그 핵심, 열매만을 남기는 것을 목표로 한다. 부패의 과정은 자기 스스로의 오염되고 끔찍한 측면을 받아들이는 태도이며, 무력하고 수동적인 자세를 취함으로써, 새로운 생명이 오게하는 것이다. 원형적인 세계, 무의식은 우리가 접근하려 할 때, 종종 위협적이고 공격적인, 더러운 무엇으로 경험된다. 개성화 과정에서, 우리가 우리 정신의 이 끔찍하고 오염된 부분들을 볼 수 있는 용기를 낼 때만이, 무의식은 우리에게 새로운 영적 각성과 새로운 삶의 감각이라는 축복을 주는데, 이것이 부패가 의미하는 것이다. 뼈와 골격은 생명의 부술 수 없는, 소멸되지 않는 본질적인 요소를 상징한다. 뼈는 재생을 위한 최소 단위이자, 재생의 바탕이 되며, 여기서 새로운 생명이 자라나게 된다. 뼈의 상태로 환원은 생명의 바로 그 원천으로 돌아감을, 자궁으로 다시 들어가 심리적으로 자신의 자아중심성을 버리고, 자기가 개성화의 전 과정을 이끌도록 허용하는 것이다. 앞으로의 발달을 위해, 골격 상태로의 환원의 어려운 과정을 겪는 것은, 자아의 죽음의 선언이며, 그 목적은 자신을 썩기 쉽고 덧없는 살과 피, 육신에서 해방시키고, 전체로서의 영적인 갱신, 생명의 불멸의 요소를 얻기 위함이다. 초분은 또한 식물의 순환에서 해마다 보이는 부패와 생명의 부활을 보여준다. 초분에서는 이러한 식물의 순환의 상징이 다른 일반적인 한국 전통 상장례에서보다 명확하고 강하게 드러나는데, 죽음에도 살아남는 생명의 부분을 식물의 상징을 통해 경험하게 한다. 초분과 관련된 식물은 죽음 후의 생명의 지속성, 심리적으로 말해, 자기의 존재를 말한다. 초분에서 드러나는 풍부한 식물의 이미지들은, 모든 것이 사라진 죽음의 상태 너머에 존재하는 생명의 존재와 관련되어 있으며, 심리학적으로 우리의 삶에 정신에 끝없는 에너지를 공급하는 영원히 존재하며 의식을 다시 태어나게 하고 새롭게 하는 자기의 존재를 이야기한다.
Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1
PET/CT 검사에서 발생하는 환자의 움직임은 감쇠보정의 불일치를 초래하여 정량평가에 영향을 주게 되어 결과의 정확도를 저하시키게 된다. 본 연구에서는 PET/CT 3D 영상촬영에서 투과촬영 후 방출촬영의 위치변화에 따른 감쇠보정 불일치 시 감쇠보정 위치 변화 방법을 이용한 영상재구성법의 유용성에 대하여 평가하였다. GE Discovery STE16 장비에 스티로폼(
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70