• 제목/요약/키워드: Decay Length

검색결과 98건 처리시간 0.033초

선택적인 다공질 실리콘 에칭법을 이용한 압저항형 실리콘 가속도센서의 제조 (Fabrication of Piezoresistive Silicon Acceleration Sensor Using Selectively Porous Silicon Etching Method)

  • 심준환;김동기;조찬섭;태흥식;함성호;이종현
    • 센서학회지
    • /
    • 제5권5호
    • /
    • pp.21-29
    • /
    • 1996
  • (111), $n/n^{+}/n$ 3층 구조의 실리콘 기판을 HF 용액 내에서 양극반응시켜 선택확산된 $n^{+}$ 층에 다공질 실리콘층(Porous Silicon Layer : PSL)을 형성한 후, 이를 5% NaOH 수용액에서 식각하여 미세구조를 제조하는 다공질 실리콘 식각법을 이용한 실리콘 미세구조의 제조법으로 8개의 빔을 갖는 압저항형 실리콘 가속도센서를 제조하였다. 제조된 가속도센서의 매스 패드(mass pad)의 반경, 빔 길이, 빔 폭, 그리고 빔 두께는 각각 $700\;{\mu}m$, $50;{\mu}m$, $100\;{\mu}m$, $7\;{\mu}m$ 였다. 자동차의 응용을 위하여 50g 범위의 가속도를 측정할 수 있도록 진동질량은 2 mg으로 제조하였다. 이때, 진동질량을 부가하는 방법은 Pb/Sn/Ag 솔더 페이스트를 매스 패드에 디스펜싱한 후, 3-zone reflow 장치를 사용하여 열처리하였다. 제조된 가속도센서의 충격응답에 대한 감쇠시간은 약 30 ms로 나타났으며, 가산회로로 합한 출력의 감도는 2.9 mV/g이며, 비선형특성은 full scale 출력에서 2%이하로 측정되었다. 그리고 각 브릿지의 편차는 ${\pm}5%$ 미만으로 나타났다. 또한 측정된 타축감도는 약 4% 이하로 나타났으며, 시뮬레이션 결과로 부터 얻은 센서의 공진주파수는 2.15 KHz이었다.

  • PDF

Armillaria 속균을 이용한 천마의 생산 (Production of Gastrodia elata Tuber using Armillaria spp.)

  • 성재모;정범식;양근주;이현경
    • 한국균학회지
    • /
    • 제23권1호통권72호
    • /
    • pp.61-70
    • /
    • 1995
  • Armillaria 속균은 천마를 생산하는데 아주 중요한 균이다. 한국에서는 천마재배지의 골목과 이병수목 그리고 그 곳에서 발생한 자실체로부터 72균주가 분리 되었다. 이들 분리균에 대한 정확한 biological species를 분류하기 위하여 tester를 이용하여 교배시험을 한 결과 A. mellea가 2균주로 이들 균주는 천마재배포장에서 분리 된 균주이며 이제까지 채집한 자실체에서 분리된 균주에서는 A. mellea가 없었다. A. tabescens는 7균주로 치악산에서는 신나무, 속초에서는 해송의 그루터기와 강원대 연습림의 참나무에서 형성된 자실체에서 분리되었으며 A. ostoyae는 24균주로 주로 본 병원균에 침입을 받아 죽은 10년생 전후의 잣나무의 지표면 부위에 형성된 자실체에서 분리되었다. A. gallica는 39균주로 주로 참나무 등 14 종류의 기주식물 그루터기에 형성된 자실체에서 분리되었다. Armillaria 속균들은 배양적 특성에 따라서 4가지 Group 들로 분리되었으며 Group II인 KNU-A110(A. gallica)은 다른 Group들에 비해 균사의 생장과 균사속 형성이 대단히 왕성하였고 천마의 생산에도 우수한 것으로 판별되었다. 이 균들은 식물조직에 있는 mycelial fan과 천마 사이를 균사속에 의하여 연결하고 있다. 또한 재배 방법에 있어서는 종균접착법이 가장 좋았다. 천마는 강원도 내의 13개 지역에서 발견되었다. 천마는 줄기의 색에 의하여 3가지 종류로 구별되었으며 줄기색이 brownish orange와 greyish yellow는 G. elata로 판별되었고 줄기색이 greyish green 인 것은 G. gracilis로 판별되었다. 천마는 주로 5월 중순에서 6월 중순 사이에 낙엽이 덮여진 부식토층의 남향 경사지에서 채집되었다. 자마는 성숙한 천마가 싹이나고 썩으며 생산되든지 다른 자마로부터 출아로 생산되었다. 자마는 균사속으로부터 영양분을 얻어서 자라게 되며 자마가 성숙한 천마가 되기까지는 약 3년이 소요된다.

  • PDF

다목적함수 최적화 기법을 이용한 우주발사체의 포고억제기 설계 (Pogo Suppressor Design of a Space Launch Vehicle using Multiple-Objective Optimization Approach)

  • 윤남경;유정욱;박국진;신상준
    • 한국추진공학회지
    • /
    • 제25권1호
    • /
    • pp.1-11
    • /
    • 2021
  • 포고 현상은 액체추진 로켓에서 발생하는 축방향의 동적 불안정 진동이다. 동체의 고유진동수와 추진제 공급계의 주파수가 가까와 지면 전체 시스템이 불안정 현상을 보인다. 포고 현상을 예측하기 위해 1단의 추진제 (산화제 및 연료) 탱크는 쉘 요소로, 나머지 구성 요소인 엔진 및 상단은 mass-spring으로 모델링하여 구조해석을 수행하였다. 추진제 공급계의 압력 및 유량 섭동예측에는 transmission line model이 사용되었다. 본 논문에서는 이와 같이 수행된 구조 및 유체 모델링을 통합하여 폐루프 전달함수를 구성하였다. 포고 억제기는 수동적인 방법으로 압력 섭동을 흡수하는 분 기관 및 accumulator로 구성되며 추진제 공급계 중간에 위치한다. 발사체의 비행과정 동안 포고현상을 억제하는 설계 최적화를 위한 설계변수로는 분기관 및 accumulator의 직경 및 길이로 설정하였다. 목적함수로는 포고 억제기의 질량, 그리고 추진제 질량에 따른 폐루프 전달함수의 에너지 최소화로 설정하여 다목적함수 최적화를 수행하였다.

소나무와 잣나무 원목에서 변재변색 발생 (Development of Fungal Sapstain in Logs of Japanese Red Pine and Korean Pine)

  • 김규혁;김재진;나종범
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권2호
    • /
    • pp.128-133
    • /
    • 2002
  • 본 연구는 동절기(1월 중순)에 벌채된 후 목재집하장으로 운반되어 야적장에 저목 중인 소나무와 잣나무 원목을 대상으로 변재변색의 발생시기와 변색 특성을 조사하기 위하여 수행되었다. 벌채 후 3, 4, 5, 6, 8개월 경과시 변색 평가를 실시하였는데, 매 평가시 원목 3개를 임의로 선정하여 원목당 수축방향에 대해 일정 간격으로 7~9개의 두께 3 cm 원판을 채취하여 변색 원인균을 분리한 후 변재변색의 방사방향 최대 침투깊이와 % 변색율을 측정하였다. 변재변색은 전적으로 충형변색이었으며, 주요 변색원인균인 Ophiostomatoid 균을 매개하는 수피천공충은 소나무좀으로 확인되었다. 소나무와 잣나무 원목은 5월 이전까지는 변재변색의 위험없이 저목할 수 있으나 5월 이후부터는 원목의 변재변색이 급속하게 증가하였다. 변색의 정도는 소나무보다 잣나무에서 심하였으며, 장마철 저목 중에 소나무 원목에서 개떡버섯과 치마버섯의 자실체를 다수 관찰할 수 있었다. 본 연구를 통해 밝혀진 결과들은 앞으로 동절기에 벌채되어 저목 중인 소나무와 잣나무 원목에 발생하는 변재변색을 예방하기 위한 제반 조치를 취하는데 매우 중요한 자료로 사용될 것이다.

임간초지 개발에 관한 연구 II. 임간혼파초지에서 3요소 시비수준이 목초의 생육과 수량에 미치는 영향 (( Studies on the Grassland Development in the Forest II. Effect of fertilizer ievel on qrowth and dry matter yield of grass-clover mixtures grown under pine trees)

  • 한영춘;박문수;서성
    • 한국초지조사료학회지
    • /
    • 제5권2호
    • /
    • pp.136-142
    • /
    • 1985
  • 임목(林木)과 초사료생산(草飼料生産)이라는 측면에서 임간초지개발(林間草地開發)은 우리 나라에서 중요한 과제라 할 수 있다. 본(本) 시험(試驗)은 임간혼파초지(林間混播草地)에서 생산성향상(生産性向上)과 이용기간연장(利用期間延長)을 위한 적정시비수준(適正施肥水準)을 구명(究明)하고자 수령((樹齡) $10{\sim}15$년간(年間) 소나무지대(차광정도(遮光程度) $40{\sim}50%$)에서 질소, 인산, 칼리비료의 수준을 달리한 13가지 시비수준(施肥水準)을 난괴법으로 배치하여 목초의 생육특성, 엽록소함량, 재생과 건물수량 등을 조사하였다. 1984년(年) 수원 근교 임간지에서 수행된 시험(試驗)의 결과(結果)를 요약(要約)하면 다음과 같다. 1. 초고(草高)와 목초피복율(牧草被覆率)은 대체로 표준비 이상의 질소시비구에서 높았으며, 3 요소 무비구와 질소무비구에서 가장 부족(不足)하였고, 최종예취후 나지율(裸地率) 질소수준이 낮을 때 높았다. 2 엽신(葉身)의 엽록색도(葉綠色度)와 엽록소함량(葉綠素含量)은 질소수준이 표준비 이상인 구에서 높았으며 3요소 무비구와 질소무비구에서 가장 낮았다. 엽부패도(葉腐敗度)와 초형(草型)은 질소수준이 높을 때 불량(不良)해지는 경향을 보였다. 3 1차(次) 예취후(刈取後) 목초(牧草)의 시기별(時期別) 재생력(再生力)은 표준비이상의 질소시용구에서 양호(良好)하였으며, 3요소무비구와 질소무비구는 재생초장(再生草長)과 재생건물중(再生乾物重) 증가속도가 가장 불량(不良)하였다.4. 목초(牧草)의 건물수량(乾物收量)은 질소수준이 표준비 이상인 구에서 많았으며 3 요소무비구와 질소무비구에서 가장 적었다(P<0.05). 본 시험에서 표준비구, 3요소 50% 증비구 및 질소 50% 증비구에서 높은 수량(收量)을 기대할 수 있었으며 세 처리간 유의차는 없었다. 5 목초(牧草)의 생육(生育), 재생(再生) 및 수량(收量)은 3요소 비료중 질소시용에 의해 가장 큰 영향을 받았으며 인산과 칼리비료의 영향은 작았다. 본(本) 시험(試驗)에서 수량(收量)위주로 볼 때 임간초지(林間草地)의 적정시비수준(適正施肥水準)은 자연광조건(自然光條件)의 일반초지(一般草地)와 마찬가지로 표준비($N-P_2O_5-K_2O=28-20-24kg/10a$)시용인 것으로 나타났으나 경제성을 고려할 때 10a당 질소는 $20{\sim}28kg$, 인산 $10{\sim}15kg$, 칼리 $12{\sim}18kg$이 적합하다고 생각된다.

  • PDF

돌나물 수집계통의 수확후 저장온도에 따른 품질변이 (Variation of Fresh Shoot Quality by Storage Temperature after Harvesting in Local Strain of Sedum sarmentosum)

  • 김효진;배종향;이승엽
    • 생물환경조절학회지
    • /
    • 제16권3호
    • /
    • pp.240-246
    • /
    • 2007
  • 돌나물의 수확후 저장온도가 저장성에 미치는 영향을 분석하기 위하여 저장온도에 따른 생체중, 색상차, 엽록소 함량, 수분함량, 외관상 변화 등을 조사하였다. 생체중은 저장온도에 따라 8.7-25.3%의 감소를 보였으며, 저장온도가 높을수록 생체중 감소율도 높았다. 계통에 따른 생체중 감소는 포항지방종이 가장 컷으며, 완주 지방종의 변화가 비교적 적었다. 외관상 품질은 $20^{\circ}C$에서 4일경, $10^{\circ}C$에서 6일경, $5^{\circ}C$에서 8일경부터 하위 잎에 변색이 나타나기 시작하였으며, 시간이 지남에 따라 서서히 부패하기 시작하였다 SPAD 값으로 비교한 엽록소 함량은 $20^{\circ}C$$10^{\circ}C$에서는 4일과 6일 후부터 급격한 감소를 보였으나, $5^{\circ}C$에서는 변화가 적었다. 잎의 색도 변화에서 명도를 나타내는 L값과 녹색-적색을 나타내는 a값은 저장온도가 높을수록 저장일 수에 따라 유의하게 증가하였다. 저장 후 10일째에 변색이나 부패한 돌나물의 비율은 저장온도가 높을수록 증가하였으며, 이는 수확시의 수분함량과 유의한 상관 관계를 보였다(P=0.01). 계통간에는 완주 지방종이 비교적 저장성이 높았으며, 군산, 완도, 포항 순으로 부패율이 높았다. 따라서 돌나물을 스치로폼 접시에 랩포장 할 경우, $5^{\circ}C$에서는 수확 후 8일까지 상품성을 유지한 상태로 저장이 가능하였다.

한우에서 전장의 유전체 정보를 활용한 연관불평형 및 유효집단크기 추정에 관한 연구 (Estimation of Linkage Disequilibrium and Effective Population Size using Whole Genome Single Nucleotide Polymorphisms in Hanwoo)

  • 조충일;이준호;이득환
    • 생명과학회지
    • /
    • 제22권3호
    • /
    • pp.366-372
    • /
    • 2012
  • 본 연구는 한우 유전체 전장에 존재하는 고밀도 단일염기다형을 DNA chip을 이용하여 각각의 유전자형을 구명하고, 동일염색체 내에 존재하는 각 표지인자쌍의 연관불평형을 성 염색체를 제외한 모든 상염색체에서 추정하여 물리적 거리별 연관불평형의 정도를 확인하고 이러한 결과를 이용하여 한우 집단의 유효집단 크기를 추정하기 위하여 실시하였다. 한우개량사업소에서 2005년부터 2008년까지 후대검정에 공시된 후보종모우 및 후대 검정우 288두에 대해 혈액을 채취하고 Bovine SNP 50 DNA Chip을 이용하여 유전자형을 분석하였으며, 총 51,582 표지인자 중 결측률이 10% 이상인 표지인자 1개 및 다형성이 없는 표지인자 10,730개에 대해 사전제거를 실시하고 남은 40,851개의 SNP표지인자를 본 분석에 활용하였다. 연구 결과, 성 염색체를 제외한 상 염색체의 총 SNP표지인자의 길이는 2,541.6 Mb였으며, 염색체별 평균 SNP표지인자간 거리는 0.55에서 0.74로 분포하였으며, EM알고리즘을 이용하여 염색체별 연관불평형을 추정해 보았을 때, 기존의 보고된 연구와 유사하게 표지인자간 거리가 짧을수록 높게 나타나는 지수형태의 그래프를 나타냈으며, SNP표지인자간 거리에 따른 $r^2$를 보면, 0 Mb에서 0.1 Mb일 때 0.136, 0.1-0.2 Mb에서 0.06로 나타났다. Luo (1998)의 연구결과를 한우에 적용시켰을 때, 전체분산의 5%이상 설명하는 양적형질좌위 발굴을 위해서 약 2,000두의 표현형 자료가 필요할 것으로 사료되었다. 또한 한우의 세대별 유효집단 크기에 대해 추정해 본 결과, 현재 한우의 유효집단크기는 84두로 추정되었고, 지금으로부터 약 50세대 이전의 유효집단 크기는 1,150두로 추정되었다. 가축에서 인공수정이 도입(1960년대)된 이 후 개량의 가속화로 인해 한우의 유효집단 크기가 급격히 감소한 것으로 사료되었다.

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF