• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.51-54
• /
• 2003

Three kinds of experiments were conducted to test existing methods and develop an effective methodology for the remediation of DNAPL trapped in vertical dead-end fractures. A water-flushing method failed to remove TCE from vertical dead-end fractures where no fluid flow occurs. A water-flushing experiment implies that existing remediation methods, utilizing water-based remedial fluid such as surfactant-enhanced method, have difficulty in removing DNAPL trapped from the vertical downward dead-end fractures, because of no water flow through dead-end fractures, capillary, and gravity forces. Fluid denser than TCE was injected into the fracture network, but did not displace TCE from the vertical dead-end fractures. Base(B on the analysis of the experiments, the increase in the density of the dense fluid and the addition of surfactant to the dense fluid were suggested, and this composite dense fluid with surfactant effectively removed TCE from the vertical dead-end fractures.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.187-196
• /
• 2012

Recently, for the purpose of constructing artificial ecosystem, the public aquarium and experimental mesocosm systems are receiving attention. To design and establish an aquarium and mesocosm system, there is need of several materials for simulating the environment, such as sediments, rocks, and plants. Expecially for sessile mollusks, there must be proper materials to which sessile invertebrates can adhere. Nowadays, many aquariums and mesocosm systems are using dead coral skeletons for sessile mollusks. This study was proceeded to have data on the effect of dead coral skeletons on water qualities with the experiment on the environmental factors. For this purpose, I made glass tank for experiment, chose two types of dead coral skeletons imported from the Indonesia and observed the change of water qualities and decomposition efficiency of TAN (total ammonia-nitrogen), nitrite ($NO_2{^-}$) and nitrate ($NO_3{^-}$). As a result, the lager the surface area was, the more TAN, nitrite and nitrate decomposition rate increased. In addition, coral skeletons covered with crustose algae and bacteria in the tank showed faster TAN, nitrite and nitrate removal rate and stabilization. Accordingly, this experiment suggested that dead coral skeletons could be used as a sub filter for the closed system as well as an adhering plate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.2
• /
• pp.167-172
• /
• 2012

Minerals from marine materials such as deep ocean water and Dead Sea water have been used since ancient times. We made a mask pack sheet including deep ocean water and salt from the Dead Sea and evaluated the function of the mask pack sheet through animal study. Three full-thickness skin defects were made on the backs of Sprague-Dawley rats. The wounds were left untreated in group Con, and mask pack sheets including deep ocean water or deep ocean water and Dead Sea water were used as treatment for 20 min on the skin of animals in groups DP and DDP, respectively. We analyzed the gross, histological and biochemical findings. Groups DDP and DP showed decreases in wound size, as compared to group Con at 7 days after wound infliction. The histological findings revealed that wound healing had progressed further in groups DP and DDP than in group Con, with more rapid collagen deposition and regression of neutrophils. Also, the expression of vascular endothelial growth factor and transforming growth factor ${\beta}1$ were increased in groups DDP and DP compared with those in group Con at 3 days after wound infliction. Mask sheet packs including deep ocean water and Dead Sea salt affected wound healing by reducing the inflammatory phase and stimulated wound contracture by facilitating the deposition of collagen.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.519-525
• /
• 2010

From the results of tracer test for the existing chlorine contactor in Y water treatment plant, $T_{10}$ and $T_{10}$/T were calculated as 130 min and 0.16, respectively. Therefore it required the modification schemes for improving hydraulic efficiency, surrogated by T10 and $T_{10}$/T, and disinfection performance. In this study, in order to reduce dead zone within contactor, the installation of porous baffles in the near of each corner was suggested and verified using transient CFD(Computational Fluid Dynamics) simulation technique and tracer tests on dynamic condition. From the results of simulation and tracer tests, it was revealed that porous baffles installed have been effective to reduce dead zone within contactor, and increase plug flow fraction.

• Journal of Hydrogen and New Energy
• /
• v.26 no.2
• /
• pp.136-147
• /
• 2015

Dead-ended operation of Proton Exchange Membrane Fuel Cell(PEMFC) provides the simplification of fuel cell systems to reduce fuel consumption and weight of fuel cell. However, the water accumulation within the channel prohibits a uniform supply of fuel. Optimization of the purge strategy is required to increase the fuel cell efficiency since fuel and water are removed during the purge process. In this study, we investigated the average voltage output which depends on two interrelated conditions, namely, the supply gas pressure, purging valve open time. In addition, flow visualization was performed to better understand the water build-up on the anode side and cathode side of PEMFC in terms of a variety of the current density. We analyzed the correlation between the purge condition and water flooding.

• Economic and Environmental Geology
• /
• v.33 no.5
• /
• pp.435-442
• /
• 2000

Although the mummies of Lee Myeong-Jung and his wife who were a member of the Moon family, were buried in similar sites in around 1560, the degree of decay of the dead bodies and antiquities between two people were quite different. This study was focused on the cause of-those differences in terms of engineering geology. Cranular soil found several metered depth around the study site has good drainage ability and such characteristic could be a factor of excellent conservation of dead body. From the physical characteristics of the lime-containing material that is considered to be a barrier from water and air, it was observed that the material around dead body of wife was more compact and denser than that of husband. Such results could be a clear evidence that the lime containing material around dead body of wife was excellent barrier for keeping away from water and air. To investigate those differences of physical characteristics and constituent materials between two lime-containing materials, minerals had to be identified from the two materials. It was revealed that lime-containing material around dead body of wife contains gypsum and more calcite, which could be the reason for better barrier preventing from water and air than those around husband.

• Korean Journal of Weed Science
• /
• v.18 no.3
• /
• pp.191-196
• /
• 1998

This experiment was conducted to investigate the mulch effect of rice straw and dead water foxtail treated with herbicides on weed germination, seedling establishment, and early growth of rice under the no-till culture condition. The percent seedling establishment of rice straw + dead water foxtail mulch was decreased significantly compared to rice straw mulch and non-mulch. Rice straw mulch and rice straw + dead water foxtail mulch inhibited the early growth of no-till direct seeded rice remarkably. However, they promoted rice growth after active tillering stage. Rice straw mulch and rice straw+dead water foxtail mulch in no-till direct seeding decreased weed occurrence significantly. The control value of barnyardgrass, compared with non-mulch, was 96.5% in the rice straw mulch and 75.6% in the rice straw + dead water foxtail mulch, respectively. The pH and concentration of dissolved oxygen in irrigated water were reduced significantly by both rice straw mulch and rice straw+dead water foxtail mulch during early rice growth stage.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.4
• /
• pp.437-444
• /
• 2008

Many other countries have investigated the new backwash water treatment process to save the existing water resource. There are various methods for reusing backwash water, but the membrane system has received the most interest for its efficiency. The objective of this study was to certify the application of membrane filtration system for the backwash water treatment. The experiment equipment was composed of Lab scale tubular membrane filtration system. Generally, cross-flow operation mode is used in the tubular membrane system but cross-flow operation mode demands high electric cost mainly for the pump energy. So to cut off electric cost, dead-end operation mode was used in this experiment. Filtration and bleed operation cycle was used in this membrane system. Backwash water was concentrated during the filtration process and when backwash water reached our target suspended solid concentration, it was discharged from this system. For efficient operation of filtration and bleed, mathematical matrix was drawn up and with this matrix we could simulate various sets of filtration and bleed time.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.2
• /
• pp.177-185
• /
• 2007

Hydraulic efficiency($T_{10}/T$) in clearwell is often estimated by L/W ratio. However, this estimation is not accurate because other factors which give an effect on hydraulic efficiency such as shape of basin, diffuser wall and intra-basin is ignored. Therefore, in this research, hydraulic efficiency is predicted by the quantitative analysis of dead zone using CFD simulation in a pilot scale clearwell. The results show that the reason why higher L/W ratio increase the hydraulic efficiency is to decrease the dead zone of linear region which is located between baffles. Diffuser wall or intra-basin also affects on hydraulic efficiency with this process. Also, we conclude that hydraulic efficiency can not be reached to 0.8 or higher.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.567-571
• /
• 2008

PEM Fuel Cell operation mode can be classified into dead-end mode or open mode by whether the outlet port is blocked or not. Generally, dead-end type fuel cell has some merits on the pressure drop and system efficiency because it can generate more power than the open type fuel cell due to high operating pressure condition. However, the periodic purging process should be done for removing water which is formed as product of a reaction in the gas diffusion layer. In this study, cathode side dead-end type operation has been conducted. Moreover, pulsating flow generator at the outlet of cathode side has been suggested for increasing the period to purge the formed water because the pulsating flow can make formed water scattered uniformly over the whole channel. As a result, the purging period with pulsation increased by 1.5-2 times longer than that without pulsating.