• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.335-341
• /
• 1998

In this study, the dynamic characteritics in various loading methods for wear tester were investigated experimentally. As for the dead-weight, the pneumatic, and the hydraulic method, the load control performance against external disturbances was estimated under the several loading conditions like the different sliding speed, the varied normal load, and the misaligument. The hydraulic loading method showed the most stable loading performance of all the loading methods in the experiment.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.285-291
• /
• 1998

A hydraulic pin-on-disk type tribotester was developed and it's performance was investigated experimentally. The estimate of the performance was accomplished by comparing those of the pneumatic and the dead-weight loading method. The reliability to the performance was conformed. By hydraulic loading method more accra'ate friction coefficient could be got.

• Journal of Acupuncture Research
• /
• v.17 no.1
• /
• pp.143-151
• /
• 2000

Acute and subacute toxicity of Artemisia asistica Nakai Aqua-acupuncture Solution (ANAS) were studied in ICR mice. In acute toxicity test, mice were injected intraperitoneally with single dose of $1{\times}$, $5{\times}$, $10{\times}$ ANAS, and toxicological responeses were observed for consecutive 14 days. Mortality, body weight changes, organ weight, and serum chemistry were performed. The mortality and body weight changes of mice treated with $1{\times}$ and $5{\times}$ ANAS were not affected during the experimental periods. With the $10{\times}$ ANAS treatment, there were dead animals and changes of body weight, organ weight and serum biochemical values were observed during the experimental period. In subacute toxicity test, mice were injected intraperitoneally with doses of $1{\times}$, $10{\times}$ ANAS for 14 days. No difference was found between control and $1{\times}$ ANAS treated group in mortality, changes of body weight and organ weight, and serum biochemical values. However, Dead animals, changes of body weight and organ weight, and increased serum biochemical values were observed with $10{\times}$ ANAS treated groups. These results suggest that $1{\times}$ ANAS causes no toxicity in acute and subacute toxicity tests. However $10{\times}$ ANAS causes toxicity in both tests.

• The Korean Journal of Ecology
• /
• v.20 no.5
• /
• pp.367-373
• /
• 1997

The effects of salinity on the growth and production of rice were studied at Seosan reclaimed land from July to October, 1995. The plant height, the number of living aleaves, dead leaves and total leaves, the number of the grains and the dry weight of the grains per individual, and the dry weight of above the ground in $25cm{\times}25cm$ quadrat were investigated on 5 plots whers were different salinity. The plant height, the number of living leaves and total leaves and the number of grains and the dry weight of grains per individual, and the dry weight of above the ground decreased as the salinity of water increase and the number of dead leaves of rice increased as the salinity of water decrease. The effect of salinity on the reproductive production is severer than the vegetative production. Because of the salinity, the growth and the production of the rice at Seosan reclaimed land are worse than the normal rice field.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.20-25
• /
• 1989

This experiment was carried out in order to know the decreasing causes of plant density and its relations with pasture productivity by the times of established pasture. The results were summarized as follows, 1. The yield components of dead plant can be used to estimate the changes of pasture productivity by the times of established pasture. 2 . The number of dead plants(PD) showed a quadraticalrelation with mean dry weight of dead plant $W/pl.)$ by the times of established pasture. 3. Relationship between relative number of tillers per dead plant to mean number of tillers of adjacent plants (RNT) and relative ratio of number of tillers per dead plant to number of tillers of plants in the 1st cutting (RNDT) showed highly positive significant correlation in 1 and 3 years old pasture. 4. Less than 100 of RNT were 79.5 %, 71.4 % and 100 % of dead plants in 1, 3 and 5, and 7 years old pasture, respectively. 5. Not exceeding values of RNDT to MRRNT were 89.7 %, 71.4 % and 100 % of dead plants in 1, 3 and 5, and 7 years old pasture. 6 . The values of 79.5 %, 57.2 % and 100 % of dead plants in 1, 3 and 5, and 7 years old pasture were not exceeding to MRRNT and less than 100 of RNT. 7. From the results described above, it was discussed that the relative number of tillers per dead plant(RNT) should be described not absolute deaeasing causes of plant density in 1 and 3 yars old pasture. But, the total number of dead plants in 5 and 7 years old pasture were absolutely influenced by RNT and MRRNT.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.406.2-406.2
• /
• 2003

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.99-107
• /
• 2008

The aim of this study was to provide fundamental data in training to improve athletes' competitiveness through the comparative analysis of kinematic variables according to the types of stance. For this study, the subjects selected 4 Junior Weight lifters. Subjects performed two type(8-type and 11-type) Dead-lift and their performance was sampled at 60frame/sec. using four high-speed digital video cameras. After digitizing images from four cameras, the two-dimensional coordinates were used to produce three-dimensional coordinates of the 15 body segments(20 joint makers and 2 bar makers). And the results were as follows. 1. As for the time required for stances, 8-type motion was faster than 11-type motion. 2. As for the body-center shift in stances, 8-type motion was bigger than 11-type motion in back and forth motion shift, and 11-type motion was bigger than 8-type motion in right and left, up and down motion shift. 3. As for the speed of a body-center and a babel, 8-type motion was faster than 11-type motion. 4. As for the motion-trace of a babel in stances, 8-type motion was bigger than 11-type in back and forth, right and left motion and 11-type motion was bigger than 8-type in up and down motion. 5. As for the body-angles in stances, 8-type motion was bigger than 11-type in the stance angle, and 11-type motion is bigger than 8-type in the angles of a coxa, a knee and an ankle. As a result of the comparative analysis between 8-type and 11-type stance of Junior Weight lifters dead-lift, both were generally similar in variables, but 8-type motion was more stable than 11-type in aspects of time, speed, center shift, angle change.

• Fire Science and Engineering
• /
• v.23 no.1
• /
• pp.21-32
• /
• 2009

In order to inspect the danger of forest fires, the thermal characteristics and the ignitability of the dead leaves and the living leaves for the main species of trees in Youngdong areas have been studied by the TG/DTA and the group flammability tester. From this work, the thermal delay has been increased with the increase of the heating rate. The fractions of the thermal weight loss for the dead leaves and the living leaves of the coniferous trees were higher than those of the broadleaf trees. Also, it was confirmed that the ignitable dangers of the dead leaves and the coniferous trees were higher than those of the living leaves and the broadleaf trees, due to the low auto ignition temperature and thermal resistance.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.204-211
• /
• 2002

Today\`s industrialized plants are required to reduce SOx emitted from stacks at factories, utility power stations, etc. For this purpose, flue gas desulfurization(FGD) system is installed in thermal power plant and gas-gas heater(GGH) is used to play a vital role to reheat the wet treated gas from FGD. The sector plates are located at cold and hot sides of gas-gas heater. They serve as sealing to prevent mixing treated and untreated gases. Therefore, the deformation of the sector plate due to its dead weight and gas pressure should be considered as major factor for the sector plate design. And finite element analysis(FEA) for rotor part in GGH is performed with original model and two weight-reduced models with different diaphragm thickness, respectively. Stress concentrations at rotor diaphragm happen due to the dead weight, pressure difference between treated and untreated gas, and thermal distribution in the rotor. As the thickness of diaphragm is decreased, the stress level is increased. The direction of treated gas and untreated gas flow may affect the stress level.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.186-192
• /
• 2002

As industry is developed, the faster transportation of freight train is demanded. The optimum design of a structure requires the determination of economical member size and shape of a structure which will satisfy the design conditions and the functions. In this study, it is attempted to minimize the dead weight of bogie frame. From the numerical results in the shape and size optimization of the bogie frame, it is known that the weight can be reduced up to 17.45% with the displacement, stress, first natural frequency and critical buckling-load constraints. The first natural frequency and the critical buckling load of the optimized model is larger than that of the lowest design value. Stress and displacement conditions are also satisfied within the design conditions. From the results, the optimal model is stable and useful for the improvement of railway carriages.