• 자원리싸이클링
• /
• 제17권3호
• /
• pp.10-20
• /
• 2008

농업용 폐비닐의 재활용에 대한 무기충진재의 거동을 연구하기 위하여 한국환경자원공사 시화 및 정읍공장에서 세척된 PE fluff들을 각각 사용하였다. 먼저 PE 플러프에 무기충진재인 탄산칼슘과 칼펫을 배합비율별로 혼합하여 용융 압출을 통한 시험용 펠렛들을 제조한 후 프레스 몰딩을 거쳐 시료별로 시험용 시트들을 제작하였다. 이들 무기충진 복합재의 기계적 특성인 인장, 굴곡, Izod 충격시험을 실시하였고, 열적 특성인 열변형온도, vicat 연화온도, 용융흐름지수(MFI)를 시험 및 분석을 하였다. 또한 플라스틱 내부에서 무기충진재의 분산성 및 wetting정도를 확인하기 위하여 SEM을 통해 모폴로지를 조사하였다. 이들 결과로부터 물리적인 측면과 경제적인 관점에서 재생 PE와 무기충진재의 최적 배합비들을 얻었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권5호
• /
• pp.59-67
• /
• 2012

시멘트를 생산할 때 발생하는 이산화탄소로 인하여 콘크리트를 활용하는 건설산업의 친환경성이 문제시 되어가고 있는 실정이다. 이에 본 연구에서는 석회석미분말로 시멘트를 대체하는 기술의 기초연구로서 석회석미분말을 함유한 콘크리트의 내구특성에 관하여 특성을 파악하고자 하였다. 실험변수는 석회석미분말의 시멘트 치환률을 0%에서 25%까지 5%씩 중가하였으며 동결융해 저항성, 제설염 저항성 및 알칼리-실리카반응 저항성 등의 내구특성과 기초적인 경화특성 등을 분석하였다. 석회석미분말의 사용으로 인한 동결융해저항성, 제설제염 저항성 등의 영향은 거의 없는 것으로 나타났으며 또한 알카리-실리카반응성의 억제를 위하여도 긍정적으로 검토될 수 있을 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.545-549
• /
• 2001

We have produced electrolyte solution out of 1.15M $LiPF_6$ EC/EMC/DEC/PC(30/55/10/5 by vol%) as a reference, and at the same time, performed basic physical property test using a single solvent of 1.15M $LiPF_6$ DEC, DMC, EMC and a 2 component electrolyte solution of 1.15M $LiPF_6$ EC/DEC(1/2 by vol%) and PC/DEC(1/2 by vol%). Cyclic Voltammetry Analysis showed that, compared to existing carbonate organic solvent, the addition of DEC,DMC and EMC brought the de-decomposition peak of salt anion of $PF_6$ and the solvent at lower oxidization potential of 2.3V, 0.7V and 2.1V(vs. $Li/Li^+$). In addition, a kinetics current peak, in which intercalation of Lt is proceeded at 750mV, 450mV(vs. $Li/Li^+$), was confirmed. These findings suggest that the DEC solvent decomposition occurred at an electric potential lower than that of oxidization of existing carbonate organic solvent. Through the impedance analysis, we checked electric charge transfer resistance($R_{ct}$) according to the electric potential of $Li^+$ intercalation at 750mV(vs. $Li/Li^+$), which was the same as the resistance ($R_f$) and cyclic voltammetry of SEI film that was formed at Reference. By doing so, we found that the significant decrease of polarization resistance($R_p$) when Reference was played a part in the formation of compact SEI layer at the initial decomposition reaction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.545-549
• /
• 2001

We have produced electrolyte solution out of 1.15M LiPF$\sub$6/ EC/EMC/DEC/PC(30/55/10/5 by vol%) as a reference, and at the same time, performed basic physical property test using a single solvent of 1.15M LiPF$\sub$6/DEC, DMC, EMC and a 2 component electrolyte solution of 1.15M LiPF$\sub$6/ EC/DEC(1/2 by vo%%) and PC/DEC(1/2 by vol%). Cyclic Voltammetry Analysis showed that, compared to existing carbonate organic solvent, the addition of DEC, DMC and EMC brought the de-decomposition peak of salt anion of PF$\sub$6/$\^$-/ and the solvent at lower oxidization potential of 2.3V, 0.7V and 2.1V(vs. Li/Li$\^$+/\`). In addition, a kinetics current peak, in which intercalation of Li$\^$+/ is proceeded at 750mv, 450mv(vs. Li/Li$\^$+/), was confirmed. These findings suggest that the DEC solvent decomposition occurred at an electric potential lower than that of oxidization of existing carbonate organic solvent. Through the impedance analysis, we checked electric charge transfer resistance(R$\sub$ct/) according to the electric potential of Li$\^$+/ intercalation at 750mv(vs. Li/Li$\^$+/), which was the same as the resistance (R$\sub$f/) and cyclic voltammetry of SEI film that was formed at Reference. By doing so, we found that the significant decrease of polarization resistance(R$\sub$p/) when Reference was played a part in the formation of compact SEI layer at the initial decomposition reaction.

• 펄프종이기술
• /
• 제45권2호
• /
• pp.46-55
• /
• 2013

Recently, there are growing interests on carbon emissions related in climate change which is worldwide emerging important issue. Some research works are now carrying out in order to reduce the carbon emission in pulp and paper industries by the synthesis of precipitated calcium carbonate using the exhaust carbon dioxide from combustion furnace or incinerator. However, for solving the original problems on carbon emission, we need to consider the analysis of basic methodology on $CO_2$ through the process efficiencies. There are two general tools for carbon emissions; one is the greenhouse gas inventory and the other is $LCCO_2$ method which is applied to particular items of raw materials and utilities in unit process. In this study, the carbon emissions in wood-containing printing paper production line were calculated by using $LCCO_2$ method. The general materials and utilities for paper production, such as fibrous materials, chemical additives, electric power, steam, and industrial water were analyzed. As the results, $Na_2SiO_3$ showed the highest loads in carbon emissions, and the total amount of carbon emissions was the highest in electricity. In the production line of printing paper using de-inked pulp and BTMP, as the mixing ratio of DIP was higher, the carbon emissions were decreased because of high use of electric power in TMP process.

• 자원리싸이클링
• /
• 제21권6호
• /
• pp.65-73
• /
• 2012

탈질용 선택적 촉매 환원(SCR) 촉매는 화력발전소의 탈질 시스템에서 발생한다. 폐 SCR 촉매로부터 바나듐 및 텅스텐과 같은 유가금속을 회수하기 위한 공정은 소다배소 및 수침출 법으로 이루어진다. 본 연구에 사용된 폐 SCR 촉매는 $V_2O_5$ 1.23 %, $WO_3$ 7.73 %를 함유하고 있다. 소다배소 공정은 바나듐과 텅스텐 화합물을 수용성의 물질로 전환시켜 주는 역할을 하며, 실험은 $Na_2CO_3$ 첨가량 5 당량, 배소온도 $850^{\circ}C$, 배소시간 120 분, 폐촉매 입자크기 $54{\mu}m$의 조건에서 수행하였다. 소다배소 실험 이후 배소산물을 사용하여 수침출 실험을 수행하였다. 침출실험을 위한 배소산물은 $-45{\mu}m$의 입자크기로 분쇄하였으며, 수침출 실험조건은 침출온도 $40^{\circ}C$, 침출시간 30 분, 광액밀도 10 %이다. 소다배소 및 수침출 실험결과, 바나듐 46 %, 텅스텐 92%의 침출율을 얻었다.

• 한국물환경학회지
• /
• 제32권5호
• /
• pp.433-441
• /
• 2016

Many large dams have been constructed for water supply, irrigation, flood control and hydropower in Korea for the last century. Meanwhile, recent studies indicated that the artificial reservoirs impounded by these dams are major sources of carbon dioxide (CO₂) to the atmosphere and relevant to global budget of green house gases. However, limited information is available on the seasonal variations of CO₂ evasion from the reservoirs located in the temperate monsoon regions including Korea. The objectives of this study were to estimate daily Net Atmospheric Flux (NAF) of CO₂ in Daecheong Reservoir located in Geum River basin of Korea, and analyze the influencing parameters that characterize the variation of NAF. Daily pH and alkalinity (Alk) data collected in wet year (2012) and dry year (2013) were used for estimating the NAFs in the reservoir. The dissolved inorganic carbon (DIC) was computed using the pH and Alk measurements supposing an equilibrium state among the carbonate species. The results showed seasonal variations of NAF; negative NAFs from May to October when the primary production of the reservoir increased with water temperature increase, while positive NAF for the rest of the period. Overall the reservoir acted as sources of CO₂ to the atmosphere. The estimated NAFs were 2,590 and 771 mg CO₂ m^-2d^-1 in 2012 and 2013, respectively, indicating that the NAFs vary a large extent for different hydrological years. Statistical analysis indicated that the NAFs are negatively correlated to pH, water temperature, and Chl-a concentration of the reservoir.

• 한국세라믹학회지
• /
• 제35권11호
• /
• pp.1171-1181
• /
• 1998

$SrZr_{0.95}$$Y_{0.05}$$O_{2.975}$ powder was synthesized by ultrasonic spray pyrolysis using a solution that Sr carbonate and Zr and Y nitrates were dissolved in a citric acid solution. The processes of particle formation were in-vestigated with respect to solution properties and pyrolysis temperature. With changing the solution con-centration form 0.1M to 0.01M there was a tendency that average sizes of droplets and particles were de-creased and their size distributions were narrowed. Citrate functional groups converted the droplets into gel particles which prevented an inhomogeneous precipitation of the metal ions and facilitated the diffusion of gases during thermal decomposition. As a result the powder having spherical particles without hollow par-ticles could be prepared. Low pyrolysis temperature led to amorphous particles due to incomplete pyrolysis and made the particles difficult to maintain spherical shape due to retarded gelation of the droplets. Whereas higher pyrolysis temperature produced hollow and broken particles because the droplets un-derwent rapid gelationand decomposition. The particles obtained at two pyrolysis temperature $500^{\circ}$and $1000^{\circ}C$ consisted of a perovskite phase and a very small amount of $SrCO_3$ However after calcination at $1000^{\circ}C$ the particles contained a single perovskite phase having an average particle size of 0.63${\mu}{\textrm}{m}$ and an apparent density near to the theoretical density.

• 한국건설순환자원학회논문집
• /
• 제11권1호
• /
• pp.1-8
• /
• 2023

본 연구에서는 시멘트 제조 공정 CO₂ 배출을 저감하기 위해 철강 슬래그로 시멘트 원료로 사용되는 석회석 사용량을 대체할수 있는 수준을 시뮬레이션 방법을 이용하여 평가하였다. 이를 위해 석회석을 비롯한 시멘트 각 원료와 석회석 대체원료로서 고로 서냉 슬래그, 전로 슬래그, KR 슬래그의 화학성분을 바탕으로 최적 시멘트 원료 배합을 도출하는 시뮬레이션 분석을 수행하였다. 분석 결과, 슬래그 대체원료는 일정 수준의 CaO를 함유해 석회석 사용량을 일부 저감하는 비탄산염 대체원료로 사용할 수 있음을 확인하였다. 동시에 각 원료의 최대 사용 가능 수준을 도출하였는데. 특히 이들 원료를 각기 사용하는 경우보다 혼합해서 사용하면 석회석 저감 효과를 증대해 탈탄산 반응에 의한 CO₂ 배출을 저감하는데 기여할 수 있는 것으로 평가되었다.