• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.308-312
• /
• 2007

Ferroelectric, magnetic, and magnetoelectric effects for lanthanum modified $BiFeO_3-PbTiO_3$ ceramics have been investigated. The data show that magnetoelectric polarization coefficient, ${\alpha}_p$ is due to a linear coupling between polarization and magnetization, and that ${\alpha}_p$ is independent of dc magnetic bias and ac magnetic field. The values of ${\alpha}_p$ and magnetic induced susceptibility for lanthanum modified $BiFeO_3-PbTiO_3$ ceramics are much larger than those of single $BiFeO_3$ crystal. We believe that the magnetoelectric effect is significantly enhanced by breaking of the cycloidal spin state of a long-period spiral spin structure due to randomly distributed charged imperfections.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.603-608
• /
• 2019

In this study, the multilayered thin films of (Ba,Sr)TiO3/K(Ta,Nb)O3 were fabricated by the sol-gel and spin coating methods, and their structural and electrical properties were investigated. The specimen showed polycrystalline X-ray diffraction (XRD) characteristics with a tetragonal structure. The average grain size and film thickness for one coating were about 30~40nm and 60nm, respectively. The phase transition temperature of specimen was lower than 10 ℃. The dielectric constant and loss at 20 ℃ of the specimen coated six times were 1,231 and 0.69, respectively. The rate of change in dielectric constant at an applied direct current (DC) voltage of the six times coated thin films was 17.3%/V. The electrocaloric effect was the highest around the temperature at which the remanent polarization rapidly changed. When an electric field of 660kV/cm was applied to the triply coated thin films, the highest electrocaloric property of 4.41 ℃ was observed.

• Journal of Ceramic Processing Research
• /
• 제20권4호
• /
• pp.395-400
• /
• 2019

This study was conducted on the structural and electrical properties of (Ba0.7Sr0.3)TiO3 thin films prepared by the sol-gel and spin-coating methods in order to investigate their applicability to electrocaloric devices. All specimens showed a tetragonal crystal structure and lattice constants of a = 3.972 Å, c = 3.970 Å. The mean grain size of specimens sintered at 800 ℃ was about 30 nm, and the average thickness of 5 times coated specimens was 304~311 nm. In the specimen sintered at 750 ℃, The relative dielectric constant and loss of specimens measured at 20 ℃ were 230 and 0.130, respectively, while dependence of the dielectric constant on unit DC voltage was -8.163 %/V. The remanent polarization and coercive fields were 95.5 μC/㎠ and 161.3 kV/cm at 21 ℃, respectively. And, the highest electrocaloric property of 2.69 ℃ was observed when the electric field of 330 kV/cm was applied.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.465-474
• /
• 2001

Type 304SS coatings were performed at 200$\square$ onto AISI 1045 carbon steel substrate using unbalanced magnetron sputtering (UBMS) with an austenitic AISI 304 stainless steel (SS) target of 100mm diameter. The total deposition pressure in the active Ar gas was 2$\times$10$^{-3}$ Torr. Coatings were done at various target power densities and bias voltages. Chemical compositions of metallic elements of the coatings were measured by energy dispersive X-rays spectroscopy (EDS). The structure and the morphology of Type 304SS coatings were investigated by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Corrosion properties of the coated specimens were examined using electrochemical polarization measurements and electrochemical impedance spectroscopy in a deaerated 3.5% NaCl solution. The porosity rate was obtained from a comparison of the dc polarization resistance of the uncoated and coated substrates. Scratch adhesion testing was used to compare the critical loads for different coatings. XRD results showed that the sputtered films exhibit a ferritic b.c.c. $\alpha$-phase. Potentiodynamic polarization curves indicated that all samples had much higher corrosion potential and better corrosion resistance than the bare steel substrate. The corrosion performance increased with increasing power density and the adhesion was enhanced at the bias voltage of -50V. An improvement in the corrosion resistance can be obtained with a better coating adhesion. Finally, an optimized deposition condition for corrosion protection was found as $40W/cm^2$ and -50V.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.299-303
• /
• 2015

The electrolyte is an important component in determining the performance of Fuel Cells. Especially, investigation of the conduction properties of electrolytes plays a key role in determining the performance of the electrolyte. The electrochemical properties of Yttrium stabilized zirconia (YSZ) were measured to allow the use of this material as an electrolyte for solid oxide fuel cells (SOFC) in the temperature range of $700-1000^{\circ}C$ and in $0.21{\leq}pO_2/atm{\leq}10^{-23}$. A Hebb-Wagner polarization experimental cell was optimally manufactured; here we discuss typical problems associated with making cells. The partial conductivities due to electrons and holes for 8YSZ, which is known as a superior oxygen conductor, were obtained using I-V characteristics based on the Hebb-Wagner polarization method. Activation energies for holes and electrons are $3.99{\pm}0.17eV$ and $1.70{\pm}0.06eV$ respectively. Further, we calculated the oxygen ion conductivity with electron, hole, and total conductivity, which was obtained by DC four probe conductivity measurements. The oxygen ion conductivity was dependent on the temperature; the activation energy was $0.80{\pm}0.10eV$. The electrolyte domain was determined from the top limit, bottom limit, and boundary (p=n) of the oxygen partial pressure. As a result, the electrolyte domain was widely presented in an extensive range of oxygen partial pressures and temperatures.

• 생명과학회지
• /
• 제30권2호
• /
• pp.113-121
• /
• 2020

대식세포는 특성에 따라 크게 classically activated macrophages (M1-phenotype macrophages)와 alternatively activated macrophages (M2-phenotype macrophages) 두 가지의 형태로 나눌 수 있다. M1 대식세포의 경우 직·간접적으로 병원체, 감염된 조직 및 암세포 등을 제거하는 능력을 가진 반면, M2 대식세포의 경우 항염증 반응을 동반한 손상된 세포 조직의 복구 및 세포외기질의 생성에 관여하고 있다. 본 연구에서는 상황버섯 열수추출물을 합성 흡착제인 Diaion HP-20에 통과시켜 소수성 물질을 제거한 시료(PLEP)을 이용하여 인간 유래 THP-1 단핵구 세포주의 염증성 혹은 항염증성 분극화 특성을 알아보았다. 먼저 PLEP 자체의 단핵구 세포에 대한 세포독성을 확인한 결과, 고농도의 300 ㎍/ml에서 세포독성이 확인되지 않았다. 한편 세포의 형태학적 변화를 확인한 결과, PLEP의 농도가 증가함에 따라 M1- phenotype 대식세포와 유사한 flatted and branched 형태가 증가하였다. 대식세포로 분화시킨 THP-1 세포주에 PLEP를 처리한 후, M1 대식세포 분극화 관련 유전자인 TNFα, IL-1β, IL-6, IL-8, CXCL10, CCR7과 M2-분극화 관련 유전자인 MRC-1, DC-SIGN, CCL17, CCL22의 유전자 발현량을 조사하여 분극화 양상을 알아보았다. 그 결과, M1-분극화 관련 유전자들은 PLEP 농도 의존적으로 증가하였지만, M2-분극화 관련 유전자들은 반대로 감소하였다. 또한 ELISA assay를 통하여 M1 분극화 관련 cytokine인 TNFα, IL-1β, IL-6의 발현량이 유전자의 발현량과 동일하게 증가하였다. 이러한 cytokine들의 분비를 촉진시키는 MAPK signaling 또한 PLEP의 농도가 증가함에 따라 촉진되었고 염증성 cytokine과 관련된 전사인자 NF-κB의 활성화도 증가하였다. 따라서 PLEP는 인간 유래 THP-1 세포주에서의 M1 대식세포 분극화를 통해 염증 반응을 유발하는 것으로 확인되어 염증을 촉진하는 천연물질로 이용할 수 있을 것으로 전망된다.

• BMB Reports
• /
• 제47권2호
• /
• pp.115-120
• /
• 2014

In this study, we show that Mycobacterium avium subsp. paratuberculosis MAP1305 induces the maturation of bone marrow-derived dendritic cells (BMDCs), a representative antigen presenting cell (APC). MAP1305 protein induces DC maturation and the production of pro-inflammatory cytokines (Interleukin (IL)-6), tumor necrosis factor (TNF)-${\alpha}$, and IL-$1{\beta}$) through Toll like receptor-4 (TLR-4) signaling by directly binding with TLR4. MAP1305 activates the phosphorylation of MAPKs, such as ERK, p38MAPK, and JNK, which is essential for DC maturation. Furthermore, MAP1305-treated DCs transform naive T cells to polarized $CD4^+$ and $CD8^+$ T cells, thus indicating a key role for this protein in the Th1 polarization of the resulting immune response. Taken together, M. avium subsp. paratuberculosis MAP1305 is important for the regulation of innate immune response through DC-mediated proliferation of $CD4^+$ and $CD8^+$ T cells.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.150-154
• /
• 2000

Mobilities of electrons ($\mu_p$) and holes ($\mu_p$) in 2, 5, and 10 mol% $TiO_2$-doped yttria stabilized zirconia (TD-YSZ) have been estimated by a non-steady state gas permeation method using models proposed by Weppner and Maruyama. Values of $\mu_n$ and $\mu_p$ were found to be closed to those in non-doped YSZ reported earlier. The concentration of electrons and holes were calculated from $\mu_n$ and $\mu_p$ values and the partial conductivities of electrons and holes measured by a dc-polarization method. The concentration of electrons at unit oxygen partial pressure increased with increasing $TiO_2$concentration, while the hole concentration was almost independent of $TiO_2$concentration.

• 한국결정학회지
• /
• 제12권2호
• /
• pp.65-91
• /
• 2001

Sawyer-Tower 회로를 이용한 강유전 이력곡선의 측정에서 직류 누설성분에 의한 오차요인을 검토하고 그 해결책을 제안하였다. 강유전체 시편에 존재하는 직류 누설성분에 의한 잔류분극과 항전계는 항상 과대 평가될 수 있는 위험성이 있음을 알 수 있었으며 이러한 오차는 직류누설성분이 크고 측정시간이 길수록 심화되었다. Sawyer-Tower 회로를 이용한 강유전 이력곡선과 함께 보완적으로 활용할 수 있는 전류이력곡선을 새롭게 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.329-332
• /
• 1989

Lead titanate thin films were deposited on titanium substrates by a chemical vapour deposition(CVD) process involving the application of vapour mixtures of Pb, ethyl titanate( Ti($C_2H_5O_4$)), and oxygen. The lead titanate having a stoichiometric composition has a dc conductivity of $3.2{\times}10^{-12}{\Omega}^{-1}{\cdot}cm^{-1}$ at room temperature. The nonsaturating loops observed in present investigation may be attributed to the $TiO_2$ and TiO layers between the conductive substrate and the $PbTiO_3$ ferroelectric film. The ferroelectric properties of the stoichiometric $PbTiO_3$ film included a remanent polarization of 14.1 ${\mu}C/cm^2$ and a coercive field of 20.16 kV/cm.