• Title/Summary/Keyword: Dayu

Search Result 8, Processing Time 0.028 seconds

A New Perilla Cultivar for Edible Seed 'Dayu' with High Oil Content (기름함량이 높은 종실용 들깨 신품종 '다유')

  • Lee, Myoung-Hee;Jung, Chan-Sik;Oh, Ki-Won;Park, Chung-Berm;Kim, Dae-Gyun;Choi, Jae-Kuen;Nam, Sang-Young
    • Korean Journal of Breeding Science
    • /
    • v.43 no.6
    • /
    • pp.616-619
    • /
    • 2011
  • 'Dayu', a perilla (Perilla frutescens (L.) Britton) cultivar for edible seed was developed by Department of Functional Crop, NICS, RDA in 2004. It was developed from a cross between a pedigree of Daeyeop as a female and YCPL1846 as a male parent in 1994. 'Dayu' could be characterized by white flower color and brown grain color. Dayu shows 127 cm in plant height, and has lodging tolerance. Maturing date of 'Dayu' was October 6, which was similar with that of 'Saeyeopsil'. This new cultivar has high oil content with 48.5% and high linolenic acid in the fatty acid composition. The grain yield potential of 'Dayu' is about 1.44 MT/ha in the regional yield trial.

Efficient plant regeneration through callus induction from the hypocotyl of Perilla frutescens L var. Dayu ('다유들깨'품종의 하배축에서 캘러스를 통한 고효율 식물재분화)

  • Ruyue Xu;Ji-Hi Son;Hong-Gyu Kang;Hyeon-Jin Sun;Hyo-Yeon Lee
    • Journal of Plant Biotechnology
    • /
    • v.50
    • /
    • pp.248-254
    • /
    • 2023
  • This study was conducted to establish an efficient plant regeneration system in 'Dayu', a Korean variety of Perilla frutescens developed for seed oil production, in conjunction with the previously studied variety 'Namcheon'. The healthiest callus was formed on the hypocotyl explants cultured on a medium containing 0.1 mg/L NAA and 0.5 mg/L BA, outperforming the leaf and cotyledon samples. In both dark and long-day conditions, Dayu consistently exhibited significantly higher shoot regeneration rates compared with Namcheon. The highest shoot regeneration rates in Dayu were observed from the hypocotyl explants cultured on 0.1 mg/L NAA and 0.5 mg/L BA media, with shoot regeneration rates of 84.4% and 86.7% under dark and long-day conditions, respectively. Various combinations of plant growth regulators were tested to establish the optimal shoot regeneration conditions for Dayu hypocotyl explants. The results demonstrated that the highest shoot regeneration rate (90%) was achieved when 0.5 mg/L of BA was added to the medium without NAA. Among the regenerated shoots, 70.5% were normal plants, while 19.3% were abnormal. The addition of NAA or an increase in its concentration led to a higher occurrence of abnormal plants. After the regenerated shoots were transferred to 1/2 MS medium, roots were observed within 10-15 days. By day 30, they had developed into complete plants. The results obtained from the regeneration experiments with the perilla variety Dayu can valuably inform molecular breeding reliant on transformation techniques such as genome-editing and genetic modification technology.

Inhibitors of Nitric Oxide Production from Artemisia princeps

  • Li, Dayu;Han, Xiang Hua;Hong, Seong-Su;Lee, Chul;Lee, Moon-Soon;Lee, Dong-Ho;Lee, Mi-Kyeong;Hwang, Bang-Yeon
    • Natural Product Sciences
    • /
    • v.16 no.3
    • /
    • pp.143-147
    • /
    • 2010
  • The chromatographic separation of a methanol extract of Artemisia princes led to the isolation of two sesquiterpene lactones, artecanin (1) and canin (2), together with a flavonoid, eupatilin (3). Their structures were determined by 1D, 2D-NMR and MS data analysis. All of the isolates were evaluated for their potential to inhibit the LPS-induced production of nitric oxide in murine macrophage RAW 264.7 cells. Compounds 1 - 3 inhibited nitric oxide production with $IC_{50}$ values of 19.5, 20.4 and 25.1 ${\mu}M$, respectively.

Bayesian approach for prediction of primary water stress corrosion cracking in Alloy 690 steam generator tubing

  • Falaakh, Dayu Fajrul;Bahn, Chi Bum
    • Nuclear Engineering and Technology
    • /
    • v.54 no.9
    • /
    • pp.3225-3234
    • /
    • 2022
  • Alloy 690 tubing has been shown to be highly resistant to primary water stress corrosion cracking (PWSCC). Nevertheless, predicting the failure by PWSCC in Alloy 690 SG tubes is indispensable. In this work, a Bayesian-based statistical approach is proposed to predict the occurrence of failure by PWSCC in Alloy 690 SG tubing. The prior distributions of the model parameters are developed based on the prior knowledge or information regarding the parameters. Since Alloy 690 is a replacement for Alloy 600, the parameter distributions of Alloy 600 tubing are used to gain prior information about the parameters of Alloy 690 tubing. In addition to estimating the model parameters, analysis of tubing reliability is also performed. Since no PWSCC has been observed in Alloy 690 tubing, only right-censored free-failure life of the tubing are available. Apparently the inference is sensitive to the choice of prior distribution when only right-censored data exist. Thus, one must be careful in choosing the prior distributions for the model parameters. It is found that the use of non-informative prior distribution yields unsatisfactory results, and strongly informative prior distribution will greatly influence the inference, especially when it is considerably optimistic relative to the observed data.

Statistical analysis of S-N type environmental fatigue data of Ni-base alloy welds using weibull distribution

  • Jae Phil Park;Junhyuk Ham;Subhasish Mohanty;Dayu Fajrul Falaakh;Ji Hyun Kim;Chi Bum Bahn
    • Nuclear Engineering and Technology
    • /
    • v.55 no.5
    • /
    • pp.1924-1934
    • /
    • 2023
  • In this study, the probabilistic fatigue life model for Ni-base alloys was developed based on the Weibull distribution using statistical analysis of fatigue data reported in NUREG/CR-6909 and the new fatigue data of Alloy 52M/152 and 82/182. The developed Weibull model can consider right-censored data (i.e., non-failed data) and quantify the improved safety (or reliability) based on the level of failure probability. The overall margin in the current fatigue design limit model (ASME design curve + NUREG/CR-6909 Fen model) is similar to that of the Weibull model with a cumulative failure probability of approximately 2.5%. The margin in the current fatigue design limit model demonstrated inconsistencies for the Ni-base alloy weld data, whereas the Weibull model showed a consistent margin. Therefore, the Weibull model can systematically mitigate the excessive safety margin.

Effect of different water levels on the photosynthetic pigments of crops

  • Ryu, Hee-La;Jeong, Eun-Ju;Lee, Won-Hee;Lee, In-Jung
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.205-205
    • /
    • 2017
  • An excess soil water condition is one of the major problems for the field crops growing in paddy fields because of their poor drainage and less availability for oxygen uptake which leads to adversely affect the photosynthesis. Therefore, the current study was undertaken with aim to investigate the effects groundwater level on the photosynthetic response of soy bean (Urum), red bean (Arari), sesame (Geonbaek), perilla (Dayu) after the transplanting to the lysimeter to investigate the plant-water relation and their effect on photosynthesis. The chlorophyll content of the crops according to the humid conditions of the soy bean, sesame and the perilla was found to be 5%, 6.89 % and 13.7% higher than that of the groundwater treated at 40cm, respectively. On the other hand, the chlorophyll content of adzuki bean decreased 6.6% from the groundwater level of 40cm, and the sorghum decreased by 5.7%. As a result of investigating the Fv / Fm value of groundwater, the adzuki bean at 20cm above groundwater was lower than that of groundwater by 40cm immediately before flowering. The Fv / Fm value of soy bean and sesame at 40cm above groundwater were lowered by flowering under groundwater 20 cm and Fv / Fm value of sorghum is increased at 40 cm treatment immediately before flowering while the Fv / Fm values of the perilla had no significant difference in comparison to those at 20 cm and 40 cm of groundwater. In the case of chlorophyll fluorescence reaction, it is known that the when the absolute value is closer to 0.82, the stress is considered less. As a result of comparing the numerical values of the crops, it was found that the sorghum was the most stressed followed by adzuki bean and sesame, while the soy beans and perilla was found on the average, as they received less stress.

  • PDF

Quality Characteristics of Perilla frutescens Cultivars According to Different Sowing Dates (파종 시기에 따른 들깨 품종별 품질 특성 변화)

  • Kim, Jung In;Lee, Myoung Hee;Kim, Sungup;Oh, Eunyoung;Ha, Tae Joung;Oh, Ki Won;Cho, Kwang-Soo;Jung, Chan Sik
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.66 no.4
    • /
    • pp.403-410
    • /
    • 2021
  • The present study investigated the quality characteristics of Perilla frutescens Britt. seed compounds according to the cultivar and sowing dates. In the present experiment, five Perilla cultivars, namely 'Dayu', 'Deulsaem', 'Deulhyang', 'Baekjin', 'Sodam', were planted on three different dates, including May 30, June 20, and July 10. The contents of key compounds and phenols varied depending on the cultivar and sowing date. With the delayed sowing time, the days to flowering and maturity of the culitvar decreased, while the seed weight and hardness increased. Crude protein content increased but crude lipid content decreased with the delay in the sowing time. However, there was no interaction of different sowing dates with the fatty acid content, which remained stable compared with the other values. Overall, the total polyphenol content was higher in Perilla seeds sown on May 30.