• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.705-716
• /
• 2017

As many environmental pollution problems have arisen, various studies related to the environmental evaluation have been carried out in the construction industry. However, there is no methodology for estimating the environmental load quickly for design alternatives of civil facilities in the design phase. This study aim to establish criteria of works information and designed parts which can efficiently estimate environmental loads of PSC beam bridge based on standard quantity at the early design phase. For this purpose, a detailed environmental loads database was constructed by performing Life Cycle Assessment (LCA) based on detailed design data of 25 bridges. In addition, major work with high impact on environmental load were selected, and the analysis of characteristics of environmental load according to the required materials and 8 impact categories were conducted. As a result, the superstructure accounted for 42.91%. In the superstructure, remicon of the material base and PSC beam work occupied 53.13% and 31.25%. In the substructure, remicon, rebar, and cement, which are material base, accounted for more than 93%. It is expected that this major work and material information for each part of bridge can be utilized in the construction of the model, which can estimate the approximate environmental load, reflecting the characteristics of the structure in the design phase.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.137-145
• /
• 2012

Strength model for blasted furnace slag mortar blended with sodium was investigated in this study. The main parameters of AAS (alkali activated slag) mortar were dosage of alkali activator, water to binder ratio (W/B), and aggregate to binder ratio (A/B). For evaluating the property related to the dosage of alkali activator, sodium carbonate ($Na_2CO_3$) of 4~8% was added to 4% dosage of sodium hydroxide (NaOH). W/B and A/B was varied 0.45~0.60 and 2.05~2.85, respectively. An alkali quality coefficient combining the amounts of main compositions of source materials and sodium oxide ($Na_2O$) in sodium hydroxide and sodium carbonate is proposed to assess the compressive strength of alkali activated mortars. Test results clearly showed that the compressive strength development of alkali-activated mortars were significantly dependent on the proposed alkali quality coefficient. Compressive strength development of AAS mortars were also estimated using the formula specified in the previous study, which was calibrated using the collected database. Predictions from the simplified equations showed good agreements with the test results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.109-113
• /
• 2007

This paper introduces a system, Simulation based Stochastic Markup Estimation System (S2ME), for estimating optimum markup for a project. The system was designed and implemented to better represent the real world system involved in construction bidding. The findings obtained from the analysis of existing assumptions used in the previous quantitative markup estimation methods were incorporated to improve the accuracy and predictability of the S2ME. The existing methods has four categories of assumption as follows; (1) The number of competitors and who is the competitors are known, (2) A typical competitor, who is fictitious, is assumed for easy computation, (3) the ratio of bid price against cost estimate (B/C) is assumed to follow normal distribution, (4) The deterministic output obtained from the probabilistic equation of existing models is assumed to be acceptable. However, these assumptions compromise the accuracy of prediction. In practice, the bidding patterns of the bidders are randomized in competitive bidding. To complement the lack of accuracy contributed by these assumptions, bidding project was randomly selected from the pool of bidding database in the simulation experiment. The probability to win the bid in the competitive bidding was computed using the profile of the competitors appeared in the selected bidding project record. The expected profit and probability to win the bid was calculated by selecting a bidding record randomly in an iteration of the simulation experiment under the assumption that the bidding pattern retained in historical bidding DB manifest revival. The existing computation, which is handled by means of deterministic procedure, were converted into stochastic model using simulation modeling and analysis technique as follows; (1) estimating the probability distribution functions of competitors' B/C which were obtained from historical bidding DB, (2) analyzing the sensitivity against the increment of markup using normal distribution and actual probability distribution estimated by distribution fitting, (3) estimating the maximum expected profit and optimum markup range. In the case study, the best fitted probability distribution function was estimated using the historical bidding DB retaining the competitors' bidding behavior so that the reliability was improved by estimating the output obtained from simulation experiment.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.78-90
• /
• 1998

An objective of this study was to provide database for the planting disign of buffer green space. Types, planting structure, and effect of vuffer green space were investigated in five housing complexes of newtown of metropolitan area, Korea. Buffer green space in the study sites were constructed as mounding, slope, and plate. The number of species was found 20 tree and sub-tree species(10 evergreen and 20 deciduous species ) and 13 shrub species. These species were planted in one-storyed planting structure and there was no difference with ornamental species in the urban parks. Effect of sound proof by the buffer green space was recognized but sound level in four types among the seven types was observed above standard sound level for housing complex(65dB). Effect of sound proof was especially most effective in the mounding type. It was found that planting density and index of plant crown volume were mot satisfied to the function of buffer green space because of lower density and crown volume than natural vegetation per unit. Based on these results, this study suggested that buffer green space is desirable to be developed in the mounding type over two meters height with multi-layer planting model. In addition, there is needed to consider vegetation structure of natural forest around the developing site.

• Management & Information Systems Review
• /
• v.7
• /
• pp.21-51
• /
• 2001

For increasing the competitiveness and efficiency of Korea's finance industry under the new e-finance paradigm, this paper compared the practical use of finance portal site' on service parts and stage between Korea and U.S.A.. The services which can be served from site are banking, mortgage and credit loan, stock, card, retirement tax, PFM(Personal Finance Management), EBPP(Electronic Bill Presentment and Payment) and Account Aggregation and so on. The stage of site can be divided as the information provide stage which only gives information about service parts, on-line transaction stage which real-time transaction is possibile and PFM services provide stage according to development process. As a result, the beginning of finance portal service in Korea was lated about 10years and more than it of U.S.A. So the development stage of domestic portal site is still staying in the first step and the providing services and contents or business model development parts are also in the same stage than U.S.A. Resides, Korea's sites mainly focus on their first service parts even though they recently aim internet finance portal, and provide not real time transaction but finance information. On the other hand, the U.S.A. site support substantially not only various on-line transactions but also distinctive personal services like PFM(Personal Finance Management), EBPP(Electronic Bill Presentment and Payment), Account Aggregation and Trans-account, brokerage, education center, mortgage loan, mutual fund, option, pension fund and IPOs and so on. Thus, the site of Korea need to establish real type of internet finance portal which provides one-stop services on every type of finance to customers in the real time and also require the strategic integration among finance institutions. The next turn, they need to build information system and education center to give best satisfaction to customers and acquire customer information and marker environment changes and need to provide distinctive services to quality customers throughout database from this. Also the site should provide various type of banking services which refereed above like PEM, EBPP and education center etc, and the government of Korea should support the building of IT infrastructure to Physical, legal, systematic, sociocultural, technical and human resource sections. This paper provided the future movement direction of the domestic finance portal through comparison and analysis on the practical use of it between Korea and U.S.A. and also wanted to contribute for developing and reading of Korea finance portal in the new era of the finance paradigm.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.151-160
• /
• 2006

In this study, threshold runoff which is a hydrologic component of flash flood guidance(FFG) is estimated by using Manning's bankfull flow and Geomorphoclimatic Instantaneous Unit Hydrograph(GcIUH) methods on Han River watershed. Geographic Information System(GIS) and 3' Digital Elevation Model database have been used to prepare the basin parameters of a very fine drainage area($1.02\~56.41km^2$), stream length and stream slope for threshold runoff computation. Also, cross-sectional data of basin and stream channel are collected for a statistical analysis of regional regression relationships and then those are used to estimate the stream parameters. The estimated threshold runoff values are ranged from 2 mm/h to 14 mm/6hr on Han River headwater basin with the 1-hour duration values are$97\%$ up to 8mm and the 6-hour values are $98\%$ up to 14mm. The sensitivity analysis shows that threshold runoff is more variative to the stream channel cross-sectional factors such as a stream slope, top width and friction slope than the drainage area. In comparisons between the computed threshold runoffs on this study area and the three other regions in the United States, the computed results on Han River watershed are reasonable.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.27-34
• /
• 2013

The high prediction performance of fire detector models is essentially needed to assure the reliability of fire and evacuation modeling in the process of PBD (Performance Based fire safety Design). The main objective of the present study is to measure input information in order to predict the accurate activation time of smoke detector into a Large Eddy Simulation (LES) fire model such as FDS (Fire Dynamics Simulator). To end this, FDE (Fire Detector Evaluator) which can measure the device properties of detector was developed, and the input information of Heskestad and Cleary's models was measured for a ionization smoke detector. In addition, the activation times of smoke detectors predicted using default values into FDS and measured values in the present study were systematically compared. As a result, the device properties of smoke detector examined in the present study showed a significant difference compared to the default values used into FDS, which resulted in the considerable difference of up to 15 minutes or more in terms of the activation time of smoke detector. The database (DB) on device properties of various smoke and heat detectors will be built to improve the reliability of PBD in future studies.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.749-754
• /
• 2011

In this study, we propose the design of optimized pRBFNNs-based face recognition system using two-dimensional Image and ASM algorithm. usually the existing 2 dimensional face recognition methods have the effects of the scale change of the image, position variation or the backgrounds of an image. In this paper, the face region information obtained from the detected face region is used for the compensation of these defects. In this paper, we use a CCD camera to obtain a picture frame directly. By using histogram equalization method, we can partially enhance the distorted image influenced by natural as well as artificial illumination. AdaBoost algorithm is used for the detection of face image between face and non-face image area. We can butt up personal profile by extracting the both face contour and shape using ASM(Active Shape Model) and then reduce dimension of image data using PCA. The proposed pRBFNNs consists of three functional modules such as the condition part, the conclusion part, and the inference part. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of RBFNNs is represented as three kinds of polynomials such as constant, linear, and quadratic. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to real-time face image database and then demonstrated from viewpoint of the output performance and recognition rate.

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.509-524
• /
• 1998

정보시스템 개발노력의 상당수는 실패로 끝나고 있다. 최근 통계에 따르면 정보시스템 개발 프로젝트의 반은 실패로 끝난다고 한다［kaplan, 1998］. 이와 같은 높은 실패율은 시스템 개발을 위한 노력을 체계적으로 투입하지 못하고 개발 프로젝트를 관리하기 위한 노력을 단위프로젝트 차원에서만 집중시키는데서 연유한다고 생각된다. 다시 말해 장기적인 관점에서 개발조직의 역량 향상이라는 보다 근본적인 목표를 간과하고 있는 것이다. 이러한 점에 착안하여 소프트웨어 엔지니어링 분야에서는 정보시스템 개발과 관련'한 개발 조직의 능력을 향상시키기 위한 다양한 접근방법이 제시되고 있다. 개발조직의 개발 프로세스 성숙도를 진단하기 위한 측정도구로 개발된 카네기멜론대학의 CMM(Capability Maturity Model)과 ISO 에서 정의한 표준인 SPICE (Software Process Improvement and Capability dEtermination) 모델이 그 대표적인 예에 속한다. 그러나 이와 같은 모델들은 개발조직의 프로세스 개선을 위한 방향과 요건은 제시하고 있지만, 이를 조직 내에서 구현하기 위한 구체적인 방법이나 수단은 제시해주지 못하고 있다. 따라서 이러한 접근방법 역시 소프트웨어 엔지니어링 역량 이나 개발경험이 일천한 우리 현실에서는 부분적인 성과 이상을 기대하기는 어려웠다. 본 연구에서는 이와 같은 문제점이 개발 프로젝트와 관련된 경험이나 지식을 효과적으로 추출하고, 획득하고, 체계화하고, 시스템화하여 조직 내에서 활용하려는 노력이 부족한기 때문이라고 본다. 이에 본 연구에서는 개발조직의 역량 향상을 위한 지식관리적 접근 방법의 세가지 유형을 제시하기로 한다.>$Ca^{2＋}$ 는 뿌리에서, $Mg^{2＋}$ 는 잎에서 많았으며, $PO_4$$^{-}$ 는 과실과 줄기에서 많았다. 배지간에 따른 차이는 나타나지 않았으며, $K^{+}$, $Ca^{2＋}$ 및 $Mg^{2＋}$ 는10:0에서, $PO_4$$^{-}$ 는 8:2에서 각각 많았다.해 제품을 판매하였으며, 기업 및 제품이미지 제고를 위한 고객에 대한 서비스도 강화하고 있었다. 통신기기업체내지 소프트웨어 산업으로의 진출이 가능할 수 있도록 상호진출을 허용할 필요가 있다고 본다. 이를 위해서 우리 나라 정부 역시 미국처럼 새로운 통신개혁법을 만들 필요가 있다. 새로운 통신개혁법의 핵심적인 사항으로서 첫째, 통신과 CATV간의 상호진입을 허용, 둘째, 통신사업자가 통신관련 기기산업에 참여할 수 있는 규제완화를 허용, 셋째, 유아단계에 있는 소프트웨어 및 컨테트산업을 육성하는데 산업육성책 수립 등을 적극적으로 추진하여야 할 것이다. 그리고 현재 국내 재벌기업들로 구성되어 있는 기반산업을 지원하는 기술개발 지원체제와 육성정책을 소프트웨어 및 컨텐트의 응용산업으로 개편할 필요성도 제시되며, 이를 위해 범부처 차원에서 소프트웨어 및 컨텐트 육성정책을 지원하는 종합적인 대책을 마련해야 한다고 본다.서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이 발견되었다. 이유로서는 가압하에서 용융탄산엽의 증가된 산화력으로 보다 치밀한 내식성 산화물 피막이 형성되기 때문으로 생각되고 있다. 또

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.525-543
• /
• 1998

This paper proposes a conceptual taxonomy of architectures far workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture？ Which of the components is represented as software modules of the workflow architecture？ And how are they configured and operating in the architecture？ The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and "global perspective" to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.