• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.151-160
• /
• 2006

In this study, threshold runoff which is a hydrologic component of flash flood guidance(FFG) is estimated by using Manning's bankfull flow and Geomorphoclimatic Instantaneous Unit Hydrograph(GcIUH) methods on Han River watershed. Geographic Information System(GIS) and 3' Digital Elevation Model database have been used to prepare the basin parameters of a very fine drainage area($1.02\~56.41km^2$), stream length and stream slope for threshold runoff computation. Also, cross-sectional data of basin and stream channel are collected for a statistical analysis of regional regression relationships and then those are used to estimate the stream parameters. The estimated threshold runoff values are ranged from 2 mm/h to 14 mm/6hr on Han River headwater basin with the 1-hour duration values are$97\%$ up to 8mm and the 6-hour values are $98\%$ up to 14mm. The sensitivity analysis shows that threshold runoff is more variative to the stream channel cross-sectional factors such as a stream slope, top width and friction slope than the drainage area. In comparisons between the computed threshold runoffs on this study area and the three other regions in the United States, the computed results on Han River watershed are reasonable.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.27-34
• /
• 2013

The high prediction performance of fire detector models is essentially needed to assure the reliability of fire and evacuation modeling in the process of PBD (Performance Based fire safety Design). The main objective of the present study is to measure input information in order to predict the accurate activation time of smoke detector into a Large Eddy Simulation (LES) fire model such as FDS (Fire Dynamics Simulator). To end this, FDE (Fire Detector Evaluator) which can measure the device properties of detector was developed, and the input information of Heskestad and Cleary's models was measured for a ionization smoke detector. In addition, the activation times of smoke detectors predicted using default values into FDS and measured values in the present study were systematically compared. As a result, the device properties of smoke detector examined in the present study showed a significant difference compared to the default values used into FDS, which resulted in the considerable difference of up to 15 minutes or more in terms of the activation time of smoke detector. The database (DB) on device properties of various smoke and heat detectors will be built to improve the reliability of PBD in future studies.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.749-754
• /
• 2011

In this study, we propose the design of optimized pRBFNNs-based face recognition system using two-dimensional Image and ASM algorithm. usually the existing 2 dimensional face recognition methods have the effects of the scale change of the image, position variation or the backgrounds of an image. In this paper, the face region information obtained from the detected face region is used for the compensation of these defects. In this paper, we use a CCD camera to obtain a picture frame directly. By using histogram equalization method, we can partially enhance the distorted image influenced by natural as well as artificial illumination. AdaBoost algorithm is used for the detection of face image between face and non-face image area. We can butt up personal profile by extracting the both face contour and shape using ASM(Active Shape Model) and then reduce dimension of image data using PCA. The proposed pRBFNNs consists of three functional modules such as the condition part, the conclusion part, and the inference part. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of RBFNNs is represented as three kinds of polynomials such as constant, linear, and quadratic. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to real-time face image database and then demonstrated from viewpoint of the output performance and recognition rate.

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.509-524
• /
• 1998

정보시스템 개발노력의 상당수는 실패로 끝나고 있다. 최근 통계에 따르면 정보시스템 개발 프로젝트의 반은 실패로 끝난다고 한다［kaplan, 1998］. 이와 같은 높은 실패율은 시스템 개발을 위한 노력을 체계적으로 투입하지 못하고 개발 프로젝트를 관리하기 위한 노력을 단위프로젝트 차원에서만 집중시키는데서 연유한다고 생각된다. 다시 말해 장기적인 관점에서 개발조직의 역량 향상이라는 보다 근본적인 목표를 간과하고 있는 것이다. 이러한 점에 착안하여 소프트웨어 엔지니어링 분야에서는 정보시스템 개발과 관련'한 개발 조직의 능력을 향상시키기 위한 다양한 접근방법이 제시되고 있다. 개발조직의 개발 프로세스 성숙도를 진단하기 위한 측정도구로 개발된 카네기멜론대학의 CMM(Capability Maturity Model)과 ISO 에서 정의한 표준인 SPICE (Software Process Improvement and Capability dEtermination) 모델이 그 대표적인 예에 속한다. 그러나 이와 같은 모델들은 개발조직의 프로세스 개선을 위한 방향과 요건은 제시하고 있지만, 이를 조직 내에서 구현하기 위한 구체적인 방법이나 수단은 제시해주지 못하고 있다. 따라서 이러한 접근방법 역시 소프트웨어 엔지니어링 역량 이나 개발경험이 일천한 우리 현실에서는 부분적인 성과 이상을 기대하기는 어려웠다. 본 연구에서는 이와 같은 문제점이 개발 프로젝트와 관련된 경험이나 지식을 효과적으로 추출하고, 획득하고, 체계화하고, 시스템화하여 조직 내에서 활용하려는 노력이 부족한기 때문이라고 본다. 이에 본 연구에서는 개발조직의 역량 향상을 위한 지식관리적 접근 방법의 세가지 유형을 제시하기로 한다.>$Ca^{2＋}$ 는 뿌리에서, $Mg^{2＋}$ 는 잎에서 많았으며, $PO_4$$^{-}$ 는 과실과 줄기에서 많았다. 배지간에 따른 차이는 나타나지 않았으며, $K^{+}$, $Ca^{2＋}$ 및 $Mg^{2＋}$ 는10:0에서, $PO_4$$^{-}$ 는 8:2에서 각각 많았다.해 제품을 판매하였으며, 기업 및 제품이미지 제고를 위한 고객에 대한 서비스도 강화하고 있었다. 통신기기업체내지 소프트웨어 산업으로의 진출이 가능할 수 있도록 상호진출을 허용할 필요가 있다고 본다. 이를 위해서 우리 나라 정부 역시 미국처럼 새로운 통신개혁법을 만들 필요가 있다. 새로운 통신개혁법의 핵심적인 사항으로서 첫째, 통신과 CATV간의 상호진입을 허용, 둘째, 통신사업자가 통신관련 기기산업에 참여할 수 있는 규제완화를 허용, 셋째, 유아단계에 있는 소프트웨어 및 컨테트산업을 육성하는데 산업육성책 수립 등을 적극적으로 추진하여야 할 것이다. 그리고 현재 국내 재벌기업들로 구성되어 있는 기반산업을 지원하는 기술개발 지원체제와 육성정책을 소프트웨어 및 컨텐트의 응용산업으로 개편할 필요성도 제시되며, 이를 위해 범부처 차원에서 소프트웨어 및 컨텐트 육성정책을 지원하는 종합적인 대책을 마련해야 한다고 본다.서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이 발견되었다. 이유로서는 가압하에서 용융탄산엽의 증가된 산화력으로 보다 치밀한 내식성 산화물 피막이 형성되기 때문으로 생각되고 있다. 또

• Proceedings of the Korea Database Society Conference
• /
• 1998.09a
• /
• pp.525-543
• /
• 1998

This paper proposes a conceptual taxonomy of architectures far workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture？ Which of the components is represented as software modules of the workflow architecture？ And how are they configured and operating in the architecture？ The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and "global perspective" to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.

• The Journal of Information Technology and Database
• /
• v.5 no.1
• /
• pp.97-108
• /
• 1998

This paper proposes a conceptual taxonomy of architectures for workflow management systems. The systematic classification work is based on a framework for workflow architectures. The framework, consisting of generic-level, conceptual-level and implementation-level architectures, provides common architectural principles for designing a workflow management system. We define the taxonomy by considering the possibilities for centralization or distribution of data, control, and execution. That is, we take into account three criteria. How are the major components of a workflow model and system, like activities, roles, actors, and workcases, concretized in workflow architecture. Which of the components is represented as software modules of the workflow architecture\ulcorner And how are they configured and operating in the architecture\ulcorner The workflow components might be embodied, as active (processes or threads) modules or as passive (data) modules, in the software architecture of a workflow management system. One or combinations of the components might become software modules in the software architecture. Finally, they might be centralized or distributed. The distribution of the components should be broken into three: Vertically, Horizontally and Fully distributed. Through the combination of these aspects, we can conceptually generate about 64 software Architectures for a workflow management system. That is, it should be possible to comprehend and characterize all kinds of software architectures for workflow management systems including the current existing systems as well as future systems. We believe that this taxonomy is a significant contribution because it adds clarity, completeness, and global perspective to workflow architectural discussions. The vocabulary suggested here includes workflow levels and aspects, allowing very different architectures to be discussed, compared, and contrasted. Added clarity is obtained because similar architectures from different vendors that used different terminology and techniques can now be seen to be identical at the higher level. Much of the complexity can be removed by thinking of workflow systems. Therefore, it is used to categorize existing workflow architectures and suggest a plethora of new workflow architectures. Finally, the taxonomy can be used for sorting out gems and stones amongst the architectures possibly generated. Thus, it might be a guideline not only for characterizing the existing workflow management systems, but also for solving the long-term and short-term architectural research issues, such as dynamic changes in workflow, transactional workflow, dynamically evolving workflow, large-scale workflow, etc., that have been proposed in the literature.

• Proceedings of the Korea Database Society Conference
• /
• 1999.10a
• /
• pp.191-201
• /
• 1999

데이터 웨어하우스와 데이터 품질에 관한 문헌연구를 통하여 데이터 웨어하우스 환경에서 데이터 품질의 향상을 위한 개념적 프레임워크를 개발하고자 하는 것이 본 연구의 목적이다. 데이터 웨어하우스 데이터 품질향상 활동을 지원하는 프레임워크를 개발하는 목적은 (1) 다양한 요구를 가진 사용자들이 웨어하우스 데이터에 접근하기 때문에, 사용자의 요구를 만족시키며 기업의 목적에 적합한 품질향상 활동을 지원하기 위해서이며, 다양한 기업활동을 가장 잘 지원할 수 있는 데이터 품질향상 지침을 관리자에게 제공하기 위해서 이다. (2) 웨어하우스 관리자의 데이터 품질향상 활동을 지원하기 위해서는 품질차원이나 데이터세트 등과같은 품질향상에 필요한 다양한 이슈를 관리자가 인식할 수 있도록 하기 위해서이다. (3) 데이터 웨어하우스 환경에서 데이터 품질 향상에 필요한 체계적이고 포괄적인 안목을 제공하기 위해서이다. 본 연구는 다음과 같은 단계로 수행하게 된다. 첫째, 데이터 웨어하우스의 개념과 데이터 웨어하우스의 구축단계 및 데이터 웨어하우스를 구성하는 프레임워크를 검토한다. 둘째, 데이터 웨어하우스 환경에서의 데이터 품질의 기준과 데이터 품질의 측정 및 데이터 품질의 향상 방안 등을 고찰한다. 셋째, 데이터 웨어하우스 환경에서 데이터 품질의 향상을 위한 개념적 프레임워크를 개발하기 위하여 데이터 웨어하우스 데이터 풀질 향상과 관련된 기업활동, 데이터 세트, 품질의 속성 및 차원 등을 정의한다. 마지막으로 데이터 웨어하우스 환경하에서 데이터 품질을 향상할 수 있는 3차원 구조의 개념적 프레임워크를 제안하며, 나아가 제안한 모형에 대하여 데이터 품질 향상을 위한 프로젝트 활동의 사례를 통하여 모형의 타당성을 개념적으로 설명한다.통하여 각각의 제품을 비교하였으며, 둘째 소프트웨어 종류별 평가로 제품을 응용소프트웨어, 응용개발도구, 시스템 소프트웨어로 분류하여 평균값으로 비교하였다. 셋째, 국내외 제품별 평가분석으로 전체 제품을 국내제품과 국외제품으로 분류하여 비교하였으며, 마지막으로 총괄분석을 통해 가중치를 적용하여 전 제품의 점수를 비교하였다. 여기에서는 각 제품의 평균점수에 대한 차이를 95%의 유의수준으로 T-Test를 실시하였다.uted to the society, and what the socioeconomic impacts are resulted from the program. It would be useful for the means of (ⅰ) fulfillment of public accountability to legitimate the program and to reveal the expenditure of pubic fund, and (ⅱ) managemental and strategical learning to give information necessary to improve the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technological effects. Since the HAN projects cons

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.3
• /
• pp.579-599
• /
• 2014

The purpose of this study was to identify the trends and risk of bias of research using time series analysis on health and welfare in Korea and to suggest a direction for future health and welfare research. The database searches identified 6,543 papers. Following the process for screening and selecting, a total of 91 papers were included in the systematic review. There has been a steady increase in the number of articles using time series analysis from 1987 to 2013. Time series analysis was applied in medicine and health science journals. The main goals were explanation and description. Most of the subjects were heath status and utilization of healthcare services. The main model used in the time series analysis was ARIMA followed by time series regression. The data were gathered from various sources, including the national statistical office and government agencies. For assessing risk of bias, some studies were found to have inadequate sample sizes or showed no time series graphs and plots. These findings suggest greater widespread utilization of time series analysis in the field of health and welfare and to use the appropriate analysis methods and statistical procedures to obtain more reliable results to improve the quality of research.

• Journal of KIISE:Databases
• /
• v.31 no.4
• /
• pp.395-408
• /
• 2004

A conjunctive Boolean text query refers to a query that searches for tort documents containing all of the specified keywords, and is the most frequently used query form in information retrieval systems. Typically, the query specifies a long list of keywords for better precision, and in this case, the order of keyword processing has a significant impact on the query speed. Currently known approaches to this ordering are based on heuristics and, therefore, cannot guarantee an optimal ordering. We can use a systematic approach by leveraging a database query processing algorithm like the dynamic programming, but it is not suitable for a text query with a typically long list of keywords because of the algorithm's exponential run-time (Ο(n2$^{n-1}$)) for n keywords. Considering these problems, we propose a new approach based on a property called the join sequence separability. This property states that the optimal join sequence is separable into two subsequences of different join methods under a certain condition on the joined relations, and this property enables us to find a globally optimal join sequence in Ο(n2$^{n-1}$). In this paper we describe the property formally, present an optimization algorithm based on the property, prove that the algorithm finds an optimal join sequence, and validate our approach through simulation using an analytic cost model. Comparison with the heuristic text query optimization approaches shows a maximum of 100 times faster query processing, and comparison with the dynamic programming approach shows exponentially faster query optimization (e.g., 600 times for a 10-keyword query).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.991-997
• /
• 2006

Agriculture is usually the basis of a society, as well as the solution of dietary life. However, compared to other fields in which information-oriented system is rapidly accomplished, information system of agriculture certainly has slow growth since agriculture deals with a living thing. In addition, since government bodies related to filming have faced the difficulty of information system, they have tried establishing independent information system. The current agriculture-informationizing system can be considered as Agricultural Outlook Information System, Integrated agricultural marketing Information System and Outlook & Agricultural Statistics Information System but these systems are not effectively operated contrary to rut expectation, which$\sim\sim\sim$. Actually, there are some problems of bothinvestment duplicated and management by each independent government body, as well as Korea Rural Economic Institute-Commodity Model improper to real situation. In this paper, Agricultural Outlook Information, Integrated agricultural marketing Information, and Outlook h Agricultural Statistics Information System independently operated are integrated; Circulation Control, Technical Support, and integrated Database system are established; new integrated agricultural information system and various kinds of measures for activation of this system are suggested.