• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.219-235
• /
• 2014

With the development of the technology of underwater moving bodies, the need for developing the knowledge of surface effect interaction of free surface and underwater moving bodies is increased. Hence, the two-phase flow is a subject which is interesting for many researchers all around the world. In this paper, the non-linear free surface deformations which occur during the water-exit of a circular cylinder due to its buoyancy are solved using finite volume discretization based code, and using Volume of Fluid (VOF) scheme for solving two phase flow. Dynamic mesh model is used to simulate dynamic motion of the cylinder. In addition, the effect of cylinder mass in presence of an external force is studied. Moreover, the oblique exit and entry of a circular cylinder with two exit angles is simulated. At last, water-exit of a circular cylinder in six degrees of freedom is simulated in 3D using parallel processing. The simulation errors of present work (using VOF method) for maximum velocity and height of a circular cylinder are less than the corresponding errors of level set method reported by previous researchers. Oblique exit shows interesting results; formation of waves caused by exit of the cylinder, wave motion in horizontal direction and the air trapped between the waves are observable. In 3D simulation the visualization of water motion on the top surface of the cylinder and the free surface breaking on the front and back faces of the 3D cylinder at the exit phase are observed which cannot be seen in 2D simulation. Comparing the results, 3D simulation shows better agreement with experimental data, specially in the maximum height position of the cylinder.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.949-963
• /
• 2017

This study present an efficient way of operating drainage pump station as part of nonstructural measures for reducing urban flood damage. The water level in the drainage pump station was forecast using Neuro-Fuzzy and then operation rule of the drainage pump station was determined applying the genetic algorithm method based on the predicted inner water level. In order to reflect the topographical characteristics of the drainage area when constructing the Neuro-Fuzzy model, the model considering spatial parameters was developed. Also, the model was applied a penalty type of genetic algorithm so as to prevent repeated stops and operations while lowering my highest water level. The applicability of the development model for the five drainage pump stations in the Mapo drainage area was verified. It is considered to be able to effectively manage urban drainage facilities in the development of these operating rules.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.603-617
• /
• 2023

This study aims to provide a better understanding of the turbulent flow characteristics in swash zone. A double dam-break method is employed to generate the swash zone flow. Comparing with the conventional single dam-break method, a delay between two gate opening can be controlled to reproduce various interactions between uprush and backwash. For numerical simulations, overInterDyMFoam based on OpenFOAM is adopted. Using overInterDyMFoam, interface between two immiscible fluids having different densities (i.e., air and water phases) can be tracked in a moving mesh with multiple layers. Two-dimensional Reynolds-Averaged Navier-Stokes equations are solved with a standard 𝜅-𝜖 turbulence model for momentum and continuity. Numerical model results are validated with laboratory experiment data for the time series of water depth and streamwise velocity. Turbulent kinetic energy distribution is further investigated to identify the turbulence evolution for each flow regime (i.e., uprush, backwash, and swash-swash interaction).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.505-516
• /
• 2018

In order to establish an efficient bridge maintenance strategy, the future performance of a bridge must be estimated by considering the current performance, which allows more rational way of decision-making in the prediction model with higher accuracy. However, personnel-based existing maintenance may result in enormous maintenance costs since it is difficult for a bridge administrator to estimate the bridge performance exactly at a targeting management level, thereby disrupting a rational decision making for bridge maintenance. Therefore, in this work, we developed a representative performance prediction model for each bridge element considering uncertainty using domestic bridge inspection data, and proposed a bayesian updating method that can apply the developed model to actual maintenance bridge with higher accuracy. Also, the feasibility analysis based on calculation of maintenance cost for monitoring maintenance scenario case is performed to propose advantages of the Bayesian-updating-driven preventive maintenance in terms of the cost efficiency in contrast to the conventional periodic maintenance.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.121-129
• /
• 2009

Today, it is difficult to re-use and share spatial information, because of the explosive growth of heterogeneous information and specific characters of spatial information accumulated by diverse local agency. A spatial analysis of subsurface spatial informa-tion, one of the National Spatial Data Infrastructure, needs related spatial information such as, topographical map, geologic map, underground facility map, etc. However, current methods using standard format or spatial datawarehouse cannot consider a se-mantic hetergenity. In this paper, the layered ontology model which consists of generic concept, measuremnt scale, spatial model, and subsurface spatial information has developed. Also, the current ontology building method pertained to human experts is a expensive and time-consuming process. We have developed the MDA-based metamodel(UML Profile) of ontology that can be a easy under-standing and flexiblity of environment change. The semantic quality of devleoped ontology model has evaluated by reasoning engine, Pellet. We expect to improve a semantic sharing, and strengthen capacities for developing GIS experts system using knowledge representation ability of ontology.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.151-167
• /
• 2015

At present cadastral surveying is being driven fort combination of digitalized cadastral map accord with real cadastral boundary between cadastral resurvey area and World Geodetic System transformation about all country. So this study is conducted to newly establish items being needed in making digitalization of parcel boundary points based on the World Geodetic System in registration conversion surveying. For this study firstly management of mountainous districts Act, related laws and registration conversion-related laws and regulations are reviewd. Secondly, economical, administrative validation by using data from 12-branch companies of LX is analyzed. Thirdly, surveying method and procedure were established through experimental surveying on the two cases such as digital and analog area. Finally, through investigating standard of estimate about cadastral surveying, it was calculated amendment of registration conversion surveying fee based on World Geodetic coordinate System.

• Journal of Korea Water Resources Association
• /
• v.57 no.3
• /
• pp.209-223
• /
• 2024

In the context of the fourth industrial revolution, data-driven decision-making has increasingly become pivotal. However, the integrity of data analysis is compromised if data quality is not adequately ensured, potentially leading to biased interpretations. This is particularly critical for water level data, essential for water resource management, which often encounters quality issues such as missing values, spikes, and noise. This study addresses the challenge of noise-induced data quality deterioration, which complicates trend analysis and may produce anomalous outliers. To mitigate this issue, we propose a noise removal strategy employing Wavelet Transform, a technique renowned for its efficacy in signal processing and noise elimination. The advantage of Wavelet Transform lies in its operational efficiency - it reduces both time and costs as it obviates the need for acquiring the true values of collected data. This study conducted a comparative performance evaluation between our Wavelet Transform-based approach and the Denoising Autoencoder, a prominent machine learning method for noise reduction.. The findings demonstrate that the Coiflets wavelet function outperforms the Denoising Autoencoder across various metrics, including Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and Mean Squared Error (MSE). The superiority of the Coiflets function suggests that selecting an appropriate wavelet function tailored to the specific application environment can effectively address data quality issues caused by noise. This study underscores the potential of Wavelet Transform as a robust tool for enhancing the quality of water level data, thereby contributing to the reliability of water resource management decisions.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.216-227
• /
• 2020

In science and technology diplomacy, major countries actively utilize their capabilities in science and technology for public diplomacy, especially for promoting diplomatic relations with politically sensitive regions and countries. Recently, with an increase in the influence of science and technology on national development, interest in science and technology diplomacy has increased. So far, science and technology diplomacy has relied on experts to find research topics that are of common interest to both the countries. However, this method has various problems such as the bias arising from the subjective judgment of experts, the attribution of the halo effect to famous researchers, and the use of different criteria for different experts. This paper presents an objective data-based approach to identify and recommend research topics to support science and technology diplomacy without relying on the expert-based approach. The proposed approach is based on big data analysis that uses deep-learning techniques and bibliometric methods. The Scopus database is used to find proper topics for collaborative research between two countries. This approach has been used to support science and technology diplomacy between Korea and Hungary and has raised expectations of policy makers. This paper finally discusses aspects that should be focused on to improve the system in the future.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.31-40
• /
• 2013

Purpose - The Northeast Asian Logistic Hub strategy was established to create a national competitive advantage in northeast Asia. Countries in this region are competing fiercely to become the central base distribution port as the volume of container shipping continues to increase due to the northeast Asian (especially Chinese) economic growth. The primary method by which shippers are improving their customer service and distribution is enhancing profits by minimizing call ports on the key route through strategic affiliations and the use of large vessels. Each nation is planning large-scale investments in the construction of sea ports that can accommodate large vessels. This paper proposes ways by which the logistical strategies of domestic corporations can keep pace with changes in government policy concerning the Northeast Asian Business Hub policy. It examines the logistics system in the Northeast Asian region, analyzes the government's Northeast Asian Business Hub policy, and suggests logistical strategies for domestic corporations through an analysis based on a questionnaire designed to grasp domestic firms' needs and goals. Research design, data and methodology - The purpose of this study is to determine how shipping companies establish partnerships with third-party logistics providers and draws out the implications of the results. The survey methods used were personal interviews and questionnaires distributed to a sample population through e-mail, fax, mail, and telephone. A total of 600 questionnaires were distributed, of which 165 were returned. Among these, ten were excluded due to insufficient content; ultimately, 155 were used for the sample. The statistical data collection process was analyzed through data coating and a statistical package program. Results - This study argues that greater flexibility in policies, administration, and systems will be needed to significantly improve established business practices. In this dissertation, we primarily identify that in order to become a center of northeast Asian logistics, Korea must adopt a new paradigm and abandon the existing systems that are based on the economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and equalitarianism. Flexible policies, administration, and systems will be necessary to improve business practices. Domestic corporations must establish a strategic logistics hub and related network while simultaneously pursuing value-added logistics businesses by increasing their manpower and building a logistics information system. This will strengthen their competitive edge and lead to system improvements. Conclusions - Domestic corporations must adopt a new paradigm and use more reasonable business laws, systems, and policies that are based on market-driven flexibility and transparency. Moreover, social norms and regulations should be established to help ensure political and social security. Korea must also develop a culture of tolerance for foreign companies. Finally, the paradigm defining the policy governing the development of the capital city and its satellite cities in this context must be changed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.61-68
• /
• 2011

Event-based service technology integrate service to detect events that occur in real time by analyzing the response. Is the core technology for real-time business and ubiquitous service environment construction. Is required event-based service technology on business processes in real-time business environment that providing rapid response to changing and custom service using a variety of information real-time monitoring and analysis in ubiquitous service environment. Last event-driven business processes can be used as a CEP(Complex Event Processing). The core of CEP technology, the event from multiple event sources analysis of events affecting and the way to handle action, is detect complex event to user. In previous studies, an event occurs that continue to perform without the need for partial operations. so many operations and spend a lot of memory is a problem. To solve these problems, event detection technique is proposed that large streams of data without processing any events, registered to configure a complex event occurs when all events in the application layer, complex event processing. The proposed method, first using a bitmap index to manage the event occurs. The complex events of the last event in response to define a trigger event. The occurrence of an event to display a bitmap index, a composite event occurrence of all event to configure the test through the point at which a trigger event occurs. Is proposed, If any event occurs to perform the operation. The proposed scheme perform operations when all event occurs without events having to perform each of the tests. As a result, avoid unnecessary operations and reducing the number of events to handle the increased efficiency of operations.