• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.132-140
• /
• 2003

In this paper, we propose a new scheme for view-dependent transmission of three-dimensional (3-D) polygonal mesh models with hierarchial partitioning. In order to make a view-dependent representation of 3-D mesh models, we combine sequential and progressive mesh transmission techniques. By setting higher priorities to visible parts than invisible parts, we can obtain good qualify of 3-D models in a limited transmission bandwidth. In this paper, we use a multi -layer representation of 3-D mesh models based on hierarchical partitioning. After representing the 3-D mesh model in a hierarchical tree, we determine resolutions of partitioned submeshes in the last level. Then, we send 3-D model data by view-dependent selection using mesh merging and mesh splitting operations. By the partitioned mesh merging operation, we can reduce the joint boundary information coded redundantly in the partitioned submeshes. We may transmit additional mesh information adaptively through the mesh spritting operation.

• Korean Journal of Remote Sensing
• /
• v.26 no.6
• /
• pp.653-664
• /
• 2010

The land surface reflectance is a key parameter influencing the climate near the surface. Therefore, it must be determined with sufficient accuracy for climate change research. In particular, the characteristics of the bidirectional reflectance distribution function (BRDF) when using earth observation system (EOS) are important for normalizing the reflected solar radiation from the earth's surface. Also, wide swath satellites like SPOT/VGT (VEGETATION) permit sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning. This gives a difficulty to BRDF model based reflectance normalization of high resolution satellites. The principal objective of the study is to add BRDF modeling of high resolution satellites and to supply insufficient angular sampling through identifying BRDF components from SPOT/VGT. This study is performed as the preliminary data for apply to high-resolution satellite. The study provides surface parameters by eliminating BRD effect when calculated biophysical index of plant by BRDF model. We use semi-empirical BRDF model to identify the BRD components. This study uses SPOT/VGT satellite data acquired in the S1 (daily) data. Modeled reflectance values show a good agreement with measured reflectance values from SPOT satellite. This study analyzes BRD effect components by using the NDVI(Normalized Difference Vegetation Index) and the angle components such as solar zenith angle, satellite zenith angle and relative azimuth angle. Geometric scattering kernel mainly depends on the azimuth angle variation and volumetric scattering kernel is less dependent on the azimuth angle variation. Also, forest from land cover shows the wider distribution of value than cropland, overall tendency is similar. Forest shows relatively larger value of geometric term ($K_1{\cdot}f_1$) than cropland, When performed comparison between cropland and forest. Angle and NDVI value are closely related.

• Korean Management Science Review
• /
• v.23 no.2
• /
• pp.1-16
• /
• 2006

With the diffusion of the Internet, firms try to electronically collaborate with their partners in order to cut costs and gain profits. This, electronic Partnership, called 'Collaborative IT' is quite popular between large purchase enterprises and small-to-medium sized sub-contractors. This study investigates such relations. This study proposes three groups of research variables-interorganizational relationship, collaborative IT activity, and firm performance. the interorganizational relationship consists of trust, commitment, and asymmetry of commitment. Collaborative IT activity is composed of information sharing and workflow integration. The ultimate dependent variable is firm performance. It is hypothesized that the relationship factors influence the level of collaborative IT activity, while the latter in turn affects the firm performance. The relationship factors nay also directly affect the dependent variable. In addition, collaborative IT motive, as a moderating variable, may influence the causal relationship. By means of survey, ore hundred and eighty-two responses were obtained. Most sample companies are small-sized, in the manufacturing sector. The analysis of data reveals that both trust and commitment positively affects the level of collaborative IT activity, while asymmetry of commitment has negative effects. The workflow integration is significantly related with firm performance. Information sharing, however, has no signific3nt effects. Furthermore, asymmetry of commitment shows reverse relationship with firm performance. Collaborative IT motive works as a moderating variable between information sharing and firm performance. Finally, workflow integration is believed to mediate between relationship factors and firm performance.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.373-377
• /
• 2001

This study is to examine the factors that influence the performances of service quality in university hospitals by investigating systematically the condition of service quality. A synthesis of the health care quality is conducted to identify physical quality, operating process quality, and human resources quality that relate to both the overall satisfaction and intention of revisit. Based on the proposed hypotheses, the relationships between the service quality factors and performance are examined using data collected from 167 patients in three hospitals, Korea. Reliability and validity tests are performed for examining its relationship with service quality in health care systems. Total eight independent variables with respect to three service quality levels and two dependent variables for performance are identified for relationships between service quality and performance in health care systems. The results provide health care managers with a managerial insight to the planning function of performance with service quality in health care systems as well as other operations (business, government, or other service organizations) systems. Implication of the study for theory, future studies, and practices are discussed.

• IE interfaces
• /
• v.13 no.3
• /
• pp.306-319
• /
• 2000

The purpose of this research is to study customer-supplier relationships, particularly their partnerships, to help managers and practitioners successfully design, develop, implement and deploy tools and joint practices as a means for an effective supply chain management (SCM). To achieve this purpose, a total of 1,811 potential survey questionnaire respondents responsible for purchasing, sales/marketing, quality-, and production- or operations-related functions of U.S. private manufacturing companies in SIC 35, 36, and 37 were used to collect quantitative data. Using 172 usable survey questionnaire responses, eight hypothesized relationships were tested using two independent (joint use of specific tools and joint practices) and four dependent variables (informed partners, role integrity, conflict resolution, and mutuality). From the overall perspective (customer+supplier), organizations with higher levels of joint action have higher degrees of informed partners whereas organizations with higher levels of joint action resolve conflicts formally and do not have higher degrees of mutuality.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.100-105
• /
• 2010

This study is to analyze the performance for ADS-B(Automatic Dependent Surveillance-Broadcast) operations by the Balanced Scorecard(BSC). It is also to collect the opinions of users(pilots, air traffic controllers and ground operators) relating ADS-B and to use the results as data about preparing political measures of aviation safety. For these purpose, BSC model redesigned on 4 different points of view is used for measuring the performance of the ADS-B operation. The proposed perspectives are affairs effectiveness, user orientation, system orientation and the capacity. As the results of this study, it is showed that the continuous development of ADS-B should be required and the users must be involved in the activities, additionally, the relevant authorities should try to be drawn the user-oriented results through the process.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.107-113
• /
• 1998

Grinding operation has difficulty in satisfying the qualitative knowledge based on the skilful expert as well as the quantitative data for all user. Design of grinding database based on the frame-based model is more effective method for utilizing the empirical and qualitative knowledge. In this paper. basic strategy to develop the grinding database by taking frame-based model, which is strongly dependent upon experience and intuition, is described. Grinding database based on the frame based model for designing the interaction and inference among the slots is accomplised by the object-oriented paradigm system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.1
• /
• pp.123-138
• /
• 2013

Keyword advertising has been used as a promotion tool rather than the advertising itself to online retailers. This is because the online retailer expects the direct sales increase when they deploy the keyword sponsorship. In practice, many online sellers rely on keyword advertising to promote their sales in short term with limited budget. Most of the previous researches use direct revenue factors as dependent variables such as CTR (click through rate) and CVI (conversion per impression) in their researches on the keyword advertising[14, 16, 22, 25, 31, 32]. Previous studies were, however, conducted in the context of aggregate-level due to the limitations on the data availability. These researches cannot evaluate the performance of keyword advertising in the individual level. To overcome these limitations, our research focuses on conversion of keyword advertising in individual-level. Also, we consider manageable factors as independent variables in terms of online retailers (the costs of keyword by implementation methods and meanings of keyword). In our study we developed the keyword advertising conversion model in the individual-level. With our model, we can make some theoretical findings and managerial implications. Practically, in the case of a fixed cost plan, an increase of the number of clicks is revealed as an effective way. However, higher average CPC is not significantly effective in increasing probability of purchase conversion. When this type (fixed cost plan) of implementation could not generate a lot of clicks, it cannot significantly increase the probability of purchase choice. Theoretically, we consider the promotional attributes which influence consumer purchase behavior and conduct individuals-level research based on the actual data. Limitations and future direction of the study are discussed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.1
• /
• pp.153-181
• /
• 2013

Weather is an influential factor to sales of companies. There have been growing attempts with which companies apply weather to developing their strategic marketing plans. By executing weather marketing activities, companies minimize risks (or negative impacts) of weather to their business and increase sales revenues. In spite of managerial importance of weather management, there are scarce empirical studies that comprehensively investigate its impact and present an efficient method that optimally allocates marketing budget. Our research was conducted in two parts. In the first part, we investigated influences of weather on sales based on real-world daily sales data. We specifically focused on the contextual factors that were less focused in the weather related research. In the second part, we propose an optimization model that can be utilized to efficiently allocate weather marketing budget across various regions (or branches) and show how it can be applied to real industry cases. The results of our study are as follow. Study 1 investigated the impact of weather on sales using store sales data of a family restaurant company and an outdoor fashion company. Results represented that the impacts of weather are context-dependent. The impact of weather on store sales varies across their regional and location characteristics when it rains. Based on the results derived from Study 1, Study 2 proposes a method on how optimally companies allocate their weather marketing budgets across each region.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.67-74
• /
• 2022

To analyze the motion of aircraft through computing the dynamics equations, true airspeed is essential for obtaining aerodynamic loads. Although the airspeed is measured by on-board instruments such as pitot tubes, measurement data are difficult to obtain for commercial flights because they include sensitive data about the airline operations. One of the commonly available trajectory data, Automatic Dependent Surveillance-Broadcast data, provide aircraft's speed in the form of ground speed. The ground speed is a vector sum of the local wind velocity and the true airspeed. This paper present a method to estimate true airspeed by combining the trajectory, meteorological, and topology data available to the public. To integrate each data, we first matched the coordinate system and then unified the altitude reference to the mean sea level. We calculated the wind vector for all trajectory points by interpolating from the lower resolution grid of the meteorological data. Finally, we calculate the true airspeed from the ground speed and the wind vector. These processes were applied to several sample trajectories with corresponding meteorological data and the topology data, and the estimated true airspeeds are presented.