• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.37-47
• /
• 1977

Korea started the Atlantic tuna fishery from 1964 by means of longline, then added bait-boats in 1972. Both fisheries have given the top priority to catch yellowfin tuna(Thunnus albacares). The paper reviews available catch, effort and biological data, estimates some population parameters in order to understand the status of the Atlantic yellowfin tuna as a whole. The main findings are summarized as follows: 1. The total of 476 million hook-equivalent fishing effort was thrown to catch yellowfin tuna in 1974, among which one thired was shared by longliners. 2. The dominant age group becomes younger in both surface and longline fisheries. 3. The recent mortality coefficients were calculated as 1.5 for total mortality and 0.7 for fishing mortality. 4. The weight at recruitment was 2.7 kg in 1973 which was smaller than the regulation size(3.2kg) proposed by ICCAT. 5. The maximum sustained yield was calculated to 95-145 thousand metric tons, which was the level of recent catch. Therefore, it is apparent that the present yellowfin tuna fishery should continue to receive close attention.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.598-606
• /
• 2013

The blackfin flounder Glyptocephalus stelleri is a commercially important species in the East Sea of Korea, but its catches and biomass have decreased gradually in recent years. This study estimated the optimal catch (acceptable biological catch, ABC) for the effective management of this species by estimating population ecology parameters and the stock biomass of blackfin flounder in the East Sea of Korea. The estimated instantaneous coefficient of total mortality (Z) of blackfin flounder was 1.0542/year, the survival rate (S) was 0.3485, and the instantaneous coefficient of natural mortality (M) was 0.3637/year. From the values of S and M, the instantaneous coefficient of fishing mortality (F) was calculated to be 0.6905/year. The age at first capture was 1.304 years, and the total length was 11.5 cm at that time. On the basis of these parameters, the annual biomass was estimated by a biomass-based cohort analysis using annual catch data in weight by year for 1991-2012 in the East Sea of Korea. The annual biomass peaked in 1997 at about 12,800 mt and then subsequently declined continuously to a level of 10,500 mt in 2004 and to 9,800 mt in 2011 and 2012. The maximum sustainable yield and $F_{0.1}$ were estimated as 3,547 mt and 0.3595/year, respectively. Using these estimations, the ABC was estimated to be 3,571 mt in tier 5, 3,397 mt in tier 4, and 2,622 mt in tier 3.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.228-228
• /
• 2017

Rice production and quality could be changed by temperature condition. Extremely high temperature event have been occurred more frequently for global warming. To increase rice quality against to global warming, breeding of heat tolerance rice cultivar is needed. Ilmi which is the one of Korean leading rice cultivar shows heat stress resistant character during ripening stage. Yield and quality (brown and milled rice) of Ilmi did not show significant different under high temperature condition compared to control condition. However, the main physiological characters for heat resistance of Ilmi have been not investigated yet. Therefore we try to investigate the heat tolerance characters of Ilmi. Two rice cultivars, Ilmi and Ilpum-which is heat susceptible rice cultivar, were cultivated under natural condition in wagnor pot until heading was appeared. After checking heading date, each material was cultivated under different temperature condition, heat($32/22^{\circ}C$) and control($26/16^{\circ}C$) condition. Anti-oxidant enzyme activity was checked during ripening stage in each material. Catalase and ascorbic peroxidase activity of leaf under heat stress condition were higher in Ilmi than Ilpum especially early ripening stage. Analyzing of stress resistance using $H_2O_2$, the flag leaf of Ilmi showed more green color than Ilpum with higher chlorophyll content than those of Ilpum. We also checked the amount of $H_2O_2$ content in young leaf of each material by treating high temperature. $H_2O_2$ content in each material was increased according to treatment time. However $H_2O_2$ content of young leaf in Ilmi was less than those in Ilpum. Also catalase and ascorbic peroxidase activity in leaf increased much faster in Ilmi than Ilpum. With those data, we confirmed that heat stress resistance of Ilmi is due to the higher anti-oxidant activity against to stress condition. We will investigate the heat tolerance characters of Ilmi more in further study to enhance the breeding effect of heat stress tolerance rice.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.308-308
• /
• 2017

The low and unstable yield of soybean has been a major problem in Japan. Excess soil moisture conditions are one of the major factors to restrict soybean productivity. More than 80 % of soybean crops are cultivated in converted paddy fields which often have poor drainage. In central and eastern regions of Japan, the early vegetative growth of soybean tends to be restricted by the flooding damage because the early growth period is overlapped with the rainy season. Field observation shows that induced excess water stress in early vegetative stage reduces dry matter production by decreasing intercepted radiation by leaf and radiation use efficiency (RUE) (Bajgain et al., 2015). Therefore, it is necessary to evaluate the responses of soybean growth for excess water conditions to assess these effects on soybean productions. In this study, we aim to modify the soybean crop model (Sinclair et al., 2003) by adding the components of the restriction of leaf area development and RUE for adaptable to excess water conditions. This model was consist of five components, phenological model, leaf area development model, dry matter production model, plant nitrogen model and soil water balance model. The model structures and parameters were estimated from the data obtained from the field experiment in Tsukuba. The excess water effects on the leaf area development were modeled with consideration of decrease of blanch emergence and individual leaf expansion as a function of temperature and ground water level from pot experiments. The nitrogen fixation and nitrogen absorption from soil were assumed to be inhibited by excess water stress and the RUE was assumed to be decreasing according to the decline of leaf nitrogen concentration. The results of the modified model were better agreement with the field observations of the induced excess water stress in paddy field. By coupling the crop model and the ground water level model, it may be possible to assess the impact of excess water conditions for soybean production quantitatively.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.720-725
• /
• 2017

M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) catalysts were prepared for the partial oxidation of methane (POM) to syngas. The catalysts were characterized by BET, TEM, and XPS. The BET-specific surface area and average pore size for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) were 538.8, 504.3, and $447.3m^2/g$ and 6.4, 6.8, and 7.1 nm, respectively. TEM results showed that the mesoporous hexagonol structure was formed for SBA-15, while the homogeneous dispersion of Ni and Ce particles on the surface was formed for Ce(10)-Ni(5)/SBA-15 caused by the confinment effect of SBA-15. XPS data confirmed that $Ce^{4+}$ and $Ce^{3+}$ on the surface catalyst have two oxidation states due to the lattice oxygen species ($O^{2-}$, $O^-$). The yields of POM to syngas over Ce(10)-Ni(5)/SBA-15 were 52.9% $H_2$ and 21.7% CO at 1 atm, 973 K, $CH_4/O_2=2$, $GHSV=1.08{\times}10^5mL/g_{cat.}{\cdot}h$, and these values were kept constant even after 75 h on streams. The same tendency of syngas yields was observed for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm). These results confirm that the redox reaction of promoters including Ce, Nd, and Sm enhanced the stability and yield of catalysts.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.131-138
• /
• 1998

In order to minimize the trial frequency in the new filter cigarette design, we studied the relationship between smoke yield and tipping materials of cigarette. A three levels full factorial design involving filament denier (X1,2.5-3.3d), Porosity of the acetate filter plug wrap (X2, 3,500-16,000CU) and porosity of the tip paper (X3, 400-1,200CU) was used. Three independent factors (Xl, X2, X3) were chosen for their effects on the various responses and the function was expressed in terms of a quadratic polynomial equation, Y : $\beta$o + $\beta$1Xl + $\beta$2X2 + $\beta$3X3 + $\beta$11Xl2 + $\beta$22X22+ $\beta$33X32 + $\beta$12X1X2 + $\beta$13XIX3 $\beta$23X2X3 which measures the linear, quadratic, and interaction effects. Twenty-nine trial numbers were obtained as a results of using a three levels full factorial design and it was analyzed by the multiple regression analysis with backward stepwise in STATISTICA/pc under restricted conditions. Tar yields of the cigarette was affected by porosity of tip paper (0.66), filament denier (0.47) and porosity of plug wrap (0.28) in the decreasing order, and linear effect of tip paper porosity (B3) and filament denier (91) were significant at a level of 0.01($\alpha$). The filament denier and tipping paper porosity interaction F ratio among three factors had a P-value of 0,000041, indicating higher interaction between these factors. Based on the analysis of variance, the model fitted for Tar (Y1) was significant at 5% confidence level and the coefficient of determination (0.96) was the proportion of variability in the data fitted for by the model.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.127-132
• /
• 1992

This experiment was conducted to find out the useful data for upland crop cultivation in the newly reclaimed tidal land. Poseung silty clay loam soil was selected, and cotton(Mogpo VII) and tall fescue were cultivated under different drainage systems and soil ameliorator applications. Soil hardness and bulk density were decreased by subsurface drainage and plastic film installed at 40cm depth of the soil. Red earth application was also effective to loosen the soil, but zeolite and gypsum made the subsoil compact. Water content of the soil was high in surface drain than that of subsurface drain or plastic film curtain plot during dry season. The water content was in order of plastic film curtain, surface drain and subsurface drain. Electrical conductivity(EC) was decreased to lower than 0.4 Simens $meter^{-1}$ ($SM^{-1}$) in the subsurface drain during rainy season, and the EC of subsurface drain was maintained a quater to an half of surface drain. The yield of cotton and tall fescue were high in order of subsurface drain, plastic film curtain and surface drain plot. The yields of cotton were increased to 36-73 % by ameliorator application, and the red earth application was more effective for tall fescue growth compare to gypsum and zeolite.

• Weed & Turfgrass Science
• /
• v.3 no.2
• /
• pp.102-109
• /
• 2014

This study was conducted in order to utilize the basic data for weed control by surveying the occurrence of weed species and the degree of damages caused by those weeds occurred in cultivated Coix lacryma-jobi var. mayuen fields. Survey was carried out three times, from June to September in 2013. The weed flora was composed of a total of 98 weeds, 33 family, of which 58 species were annual, 21 species were biennial, and 19 were perennial plants. Thirty-one exotic species were included as well. Dominance was the highest with Digitaria ciliaris followed by Acalypha australis, Echinochloa crus-galli, Portulaca oleracea, Bidens frondosa etc. in order. In the PCA plot analysis, weeds occurred in C. lacryma-jobi var. mayuen fields were divided into three groups, Panicum dichotomitlorum community, Echinochloa crus-galli-Sigesbeckia pubescens community and Acalypha australis community. Yield of C. lacryma-jobi var. mayuen was reduced 60% in no weeding plots comparing to that in weed management plots.

• Journal of agricultural medicine and community health
• /
• v.16 no.1
• /
• pp.79-89
• /
• 1991

A systematic study was conducted to identify and isolate a serologically pertinent antigen with high specific activity and low cross reactivity from Cysticercus parenchymal antigen. Differential centrifugation of the homogenate yield three particulate and one soluble fractions ; the $480{\times}G$ pellets($CyL_2$), the $7650{\times}G$ pellet($CyL_3$), the $100000{\times}G$ pellet($CyL_4$), and $100000{\times}G$ supernatant($CyL_6$). We compared antigenicity of these antigens to that or cystic fluid antigens($CyF_1$), saline extract of cystic wall($CyL_1$), and n-butanol treated $GyL_4$ antigen ($CyL_6$) based on SDS-PAGE and immunoblot techniques. The data obtained were as follows : 1) The ratio of O.D. value of ELISA against cysticercosis positive pool sera to that of negative pool sera was highest when using $CyF_1$ as antigen. However the ratio was relatively low in case of $CyL_{3.4}$ and $CyL_5$. 2) We have noted in previous paper that most strong antigenic activities are present in 63Kd band with low cross reactivities. An effective serologic reagent must contain components that are recognized by most infected sera. 63Kd band met this criteria and could be considered as a reliable band for the diagnosis of cysticercosis. As far as 63Kd band concern, $CyL_5$ showed most strong activities without disturbance of cross reaction by EITB in spite of low applicability to microplate ELISA. 3) $CyL_5$ could detect the serum antibody of cysticercosis even in very low titers, around cut-off values of microplate ELISA, by immunoblot. It also could detect the cross reactivities of Echinococcus species, which showed high absorbance value in micro plate ELISA and some sparganosis cases. Further purification of this antigen will be able to represents a antigen that can be used in the diagnosis of cysticercosis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.9
• /
• pp.1215-1221
• /
• 2016

The prediction of carcass composition in Hanwoo steers is very important for value-based marketing, and the improvement of prediction accuracy and precision can be achieved through the analyses of independent variables using a prediction equation with a sufficient dataset. The present study was conducted to develop a prediction equation for Hanwoo carcass composition for which data was collected from 7,907 Hanwoo steers raised at a private farm in Gangwon Province, South Korea, and slaughtered in the period between January 2009 and September 2014. Carcass traits such as carcass weight (CWT), back fat thickness (BFT), eye-muscle area (EMA), and marbling score (MAR) were used as independent variables for the development of a prediction equation for carcass composition, such as retail cut weight and percentage (RC, and %RC, respectively), trimmed fat weight and percentage (FAT, and %FAT, respectively), and separated bone weight and percentage (BONE, and %BONE), and its feasibility for practical use was evaluated using the estimated retail yield percentage (ELP) currently used in Korea. The equations were functions of all the variables, and the significance was estimated via stepwise regression analyses. Further, the model equations were verified by means of the residual standard deviation and the coefficient of determination ($R^2$) between the predicted and observed values. As the results of stepwise analyses, CWT was the most important single variable in the equation for RC and FAT, and BFT was the most important variable for the equation of %RC and %FAT. The precision and accuracy of three variable equation consisting CWT, BFT, and EMA were very similar to those of four variable equation that included all for independent variables (CWT, BFT, EMA, and MAR) in RC and FAT, while the three variable equations provided a more accurate prediction for %RC. Consequently, the three-variable equation might be more appropriate for practical use than the four-variable equation based on its easy and cost-effective measurement. However, a relatively high average difference for the ELP in absolute value implies a revision of the official equation may be required, although the current official equation for predicting RC with three variables is still valid.