• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.183-191
• /
• 2014

This paper describes the development of the observational data transmission algorithm for high-speed network in radio astronomy. For the preprocessing of VLBI data observed by radio telescope, data transmission algorithm uses the VDIF specification, VDIFCP, and UDP protocol by transferring VLBI data stored in a massive storage server with one-to-one correspondence between the server and the RVDB of Daejeon correlator. A transmission method is proposed, which reads the recorded data in Mark5B VSI format and trnasmits 2048 Mbps VLBI data by software through UDP packet transmission, while RVDB system is waiting for the transmitting data from the server. In order to check the effectiveness of the proposed method, the data transmission between the massive storage server and RVDB is conducted and the transmitted data is correlated by Daejeon correlator for the accurate comparison concerning the data before and after. The transmitted data is shown to be completely the same as the original data without any data transmission loss. Henceforth, the developed data transmission algorithm in this research is expected to be applied effectively as e-VLBI for KaVA network.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.79-84
• /
• 2021

The fundamental element to be kept for big data analysis, artificial intelligence technologies and asset management system is a data quality, which could directly affect the entire system reliability. For this reason, the momentum of data cleaning works is recently increased and data cleaning methods have been investigating around the world. In the field of electric power, however, asset data cleaning methods have not been fully determined therefore, automatic cleaning algorithm of asset data for transmission cables has been studied in this paper. Cleaning algorithm is composed of missing data treatment and outlier data one. Rule-based and expert opinion based cleaning methods are converged and utilized for these dirty data.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.2 s.302
• /
• pp.11-20
• /
• 2005

In previous video conference system, when the number of participants in video conference increases by n, the bandwidth and memory of n2 is required. And also, it brings about increase in traffic and problem of a say during a conference in aspect of transmission of voice data. In this paper, we propose an algorithm of remote video conference using silence detection algerian to resolve the questions such as buffering method of video data in server and heavy traffic detection algorithm to the increase in participants. Video data buffering algorithm is not a method of broadcasting to other client in the server, but this algorithm uses two other methods; the buffering method of receiving compressed video data from clients and the indexing method for acquiring the video data of other participants in clients according to clients' bandwidth and network transmission speed. We apply a voice transmission algerian and a channel management algorithm to the remote video conference system. The method used in the voice transmission algorithm is a silence detection algorithm which does not send silent participants' voice data to the server. The channel management algorithm is a method allocating a say to the participants who have priority. In consideration of average 20 frames and 30ms regardless of a number of participants, we can safely conclude that the transmission of video and voice data is stable.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.87-94
• /
• 2016

This paper proposes an energy transmission method to maximize energy efficiency of a based station. This method makes use of classification of service type to solve an inefficient use of transmission power, which is from exponential relationship between the legacy data throughput and transmission power. The proposed one is a way to find the most energy-efficiency points with the transmitted optimal amount of data on users in a base station of wireless network environment. For this, we propose EETA (Energy-Efficient Transmission Algorithm) which can control the amount of data and the holding time at the base station. As a result, the proposed method can improve the energy efficiency of about 10% compared to the legacy base station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1309-1316
• /
• 2016

This paper suggests adjusting TCP for smartphones that often have small size data transmission tendency. Usage of smartphones has been risen dramatically in recent years, including frequent usage of real-time map search, public transportation search, online games, and SNS. Because the small size data transmission ends before the phase of the TCP congestion avoidance, this paper suggests an algorithm that increases the transmission speed ahead of the traffic congestion event. The algorithm reduces unnecessary delay by data size-driven adjustment of the Linux Quick ACK and Nagle's algorithm. Therefore, TCP is improved to maintain a high transmission rate steadily in small data transmission.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.147-152
• /
• 2016

This paper proposes a new TPC (Transmission Priority Change) algorithm which is used to diagnose failures of a CAN (Controller Area Network) based network system for the oil tank monitoring. The TPC algorithm is aimed to increase the total amount of data transmission and to minimize the latency for an urgent message by changing transmission priority. The urgency of the data transmission has been determined by the conditions of sensors. There are multiple sensors inside of the oil tank, such as temperature, valve, pressure and level sensors. When the sensors operate normally, the sensory data can be collected through the CAN network by the monitoring system. However when there is a dangerous situation or failure situation happened at a sensor, the data need to be handled quickly by the monitoring system, which is implemented by using the TPC algorithm. The effectiveness of the TPC algorithm has been verified by the real experiments. In addition, this paper introduces a method that people can figure out the condition of oil tanks and also can perform the fault diagnosis in real-time by using transmitted packet data. By applying this TPC algorithm to various industries, the convenience and reliability of multiple sensors network system can be improved.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.271-278
• /
• 1995

An ECG data compression algorithM using max-min slope update is proposed and a real time 3 channel ECG transmission system is implemented using the proposed algorithm. In order to effectively compress ECG data, we compare a threshold value with the max-min slope difference (MMSD) which is updated at each sample values. If this MMSD value is smaller than the threshold value, then the data is compressed. Conversely, when the MMSD value is larger than threshold value, the data is transmitted after storing the value and the length between the data which is beyond previous threshold level. As a result, it can accurately compress both the region of QRS, P, and T wave that has fast-changing and the region of the base line that slope is changing slow. Therefore, it Is possible to enhance the compression rate and the percent roms difference. In addition, because of the simplicity, this algorithm is more suitable for real-time implementation.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.285-292
• /
• 2007

In the adaptable bandwidth allocation technique, a transmission plan for variable rate video data is made by the CBA algorithm and the data is transmitted by considering network traffic. But the CBA algorithm produces a transmission plan where the size of the increasing interval of transmission rate is generally larger than the size of the decreasing interval. And the transmission rate in CBA algorithm is changed in overflow curve during the increasing interval of transmission rate. This ぉy cause many frames to be discarded when available transmission rate is small. In this paper, a smoothing algorithm is proposed, where transmission rate is changed in the middle of underflow curve and overflow curve, but the transmission rate increases at the minimum. In order to show the performance, the proposed algorithm and a CBA algorithm were applied to a transmission plan in the adaptable bandwidth allocation technique, and the minimum frame rates, the average frame rates, the variation of frame rates, and the numbers of discarded frames were compared in both algorithms.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.3
• /
• pp.116-122
• /
• 2006

The underground transmission lines is continuously expanded in power systems. Therefore the fault of underground transmission lines are increased every year because of the complication of systems. However the studies dealing with fault location in the case of the underground transmission lines are rarely reported except for few papers using traveling wave method and calculating underground cable impedance. This paper describes the algorithm using fuzzy system and travelling wave method in the underground transmission line. Fuzzy inference is used for fault discrimination. To organize fuzzy algorithm, it is important to select target data reflecting various underground transmission line transient states. These data are made of voltage and average of RMS value on zero sequence current within one cycle after fault occurrence. Travelling wave based on wavelet transform is used for fault location. In this paper, a variety of underground transmission line transient states are simulated by EMTP/ATPDraw and Matlab. The input which is used to fault location algorithm are Detail 1(D1) coefficients of differential current. D1 coefficients are obtained by wavelet transform. As a result of applying the fuzzy inference and travelling wave based on wavelet transform, fault discrimination is correctly distinguished within 1/2 cycle after fault occurrence and fault location is comparatively correct.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.32-38
• /
• 2020

The deployment of geographically distributed wireless sensors has greatly elevated the capability of monitoring structural health in social-overhead capital (SOC) public infrastructures. This paper deals with the utilization of a distributed mobility management (DMM) approach for the deployment of wireless sensing devices in a structural health monitoring system (SHM). Then, a wireless sensing mechanism utilizing low-energy adaptive clustering hierarchy (LEACH)-based clustering algorithm for smart sensors has been analyzed to support the seamless data transmission of structural health information which is essentially important to guarantee public safety. The clustering of smart sensors will be able to provide real-time monitoring of structural health and a filtering algorithm to boost the transmission of critical information over heterogeneous wireless and mobile networks.