• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.533-540
• /
• 2017

Distance relay identifies the type and location of fault by measuring the transmission line impedance. However any other factors that cause miss calculating the measured impedance, makes the relay detect the fault in incorrect location or do not detect the fault at all. One of the important factors which directly changes the measured impedance by the relay is series capacitive compensation (SCC). Another factor that changes the calculated impedance by distance relay is fault resistance. This paper provides a method based on the combination of distance and differential protection. At first, faulty transmission line is detected according to the current data of buses. After that the fault location is calculated using the proposed algorithm on the transmission line. This algorithm is based on active power calculation of the buses. Fault resistance is calculated from the active powers and its effect will be deducted from calculated impedance by the algorithm. This method measures the voltage across SCC by phasor measurement units (PMUs) and transmits them to the relay location via communication channels. The transmitted signals are utilized to modify the voltage signal which is measured by the relay. Different operating modes of SCC and as well as different faults such as phase-to-phase and phase-to-ground faults are examined by simulations.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1363-1365
• /
• 1999

This paper Presents an algorithm for the computation of fault location for a transmission line by means of the voltage and current signals. It is impossible to calculate the accurate fault distance, because of the fault resistance and fault current which are unknown. All Currents in the lines are divided by the current distribution factor, so the fault current through the fault resistance can be represented by using data from one terminal of transmission line. This algorithm proposed can calculate the fault distance with only the faulty phase information.

• Smart Media Journal
• /
• v.3 no.3
• /
• pp.9-14
• /
• 2014

The increasing number of ECUs in automobiles causes the CAN bus overloaded and consequently the error probability of data transmission increases. Since the time duration for the data transmission is proportional to CAN frame length, it is desirable to reduce the frame length. In this paper, we present a CAN message compression method using Data Length Code (DLC) and bit rearrangement. By simulations using actual CAN data, it is shown that the CAN transmission data is reduced up to 54 % by the proposed method, compared with conventional methods.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.44-49
• /
• 2013

LED communication is a wireless communication technology to transmit information using visible light coming out from the LED(Light Emitting Diode). It is a technique that can overcome RF(Radio Frequency) communication problems that are frequency allocations, human body hazards, security vulnerabilities, and interference between electronic devices. As a technique that can be used as lighting and communications with using LED, LED communication is suitable for ubiquitous environment. This paper introduces the process of data transmission algorithm for LED communication systems algorithm using LED, PD(Photodiode), and MCU(Micro Controller Unit).

• Journal of Korea Game Society
• /
• v.6 no.2
• /
• pp.51-60
• /
• 2006

Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. Among them are CBA, MCBA, MVBA, PCRTT and others. But, in these algorithm, a transmission plan is made in according to stored frame sequence in these algorithms. In case that the number of bytes in frames in GOP differs greatly each other, this may cause unnecessary transmission rate changes and may require high transmission rates abruptly when frame's byte is large. In result, it is difficult to use efficient network resource. In this paper, we proposed a smoothing algorithm that find the optimal frame sequence in short time by using backtracking method and smoothing's structure for the proposed smoothing algorithm. This algorithm decides the sequence of frames which requires the lowest variance of frame's bytes in GOP and make a transmission plan. In order to show the performance, we compared with MVBA algorithm by various evaluation factors such as the number of rate changes, peak rate, rate variability.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.59-66
• /
• 2004

In this paper, we propose a transmission rate prediction method of video data. The proposed method checks shot transition characteristics after dividing MPEG video data into a GoP unit and then uses Kalman filter. It used algorithm to detect shot transition information by high speed in compressed domain in order to check a correct shot transition of video data and classified into a abrupt shot transition type and a gradual shot transition type. Information to have been classifying is used as factors of Kalman filter and predicts a transmission rate of video data. Also, the proposed method decreased processing time with detecting shot transition and predicting a transmission rate of video data in compressed domain. It predicted a transmission rate with 96.2- 97.6% in the experiment that used three kinds of 911 1frames of different video data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.581-587
• /
• 2021

Real-time video streaming scheme for multimedia content delivery and remote conference services is one of technologies that are significantly sensitive to data transmission delay. Recently, because of COVID-19, real-time video streaming contents for the services are significantly increased such as personal broadcasting and remote school class. In order to support the services, there is a growing emphasis on low transmission delay and secure content delivery, respectively. Therefore, our research proposed a packet aggregation algorithm to reduce the transmission delay of selectively encrypted video transmission for real-time video streaming services. Through the application of the proposed algorithm, the selectively encrypted video framework can control the amount of MPEG-2 TS packets for low latency transmission with a consideration of packet priorities. Evaluation results on testbed show that the application of the proposed algorithm to the video framework can reduce approximately 11% of the transmission delay for high and low resolution video.

• Journal of Internet of Things and Convergence
• /
• v.9 no.2
• /
• pp.11-17
• /
• 2023

Smoothing is to creating a transmission plan consisting of sections of frames that can be sent at the same transmission rate for compressed and stored video data. Various algorithms have been studied for the smoothing to minimize the number of transmission rate changes, the number of transmission rate changes, and the amount of transmission rate increase. This study evaluates the performance of a smoothing algorithm that minimizes the increase in transmission rates and maximizes the increase in transmission rates when the transmission rate is required to maximize the excess bandwidth to be secured by the server in an environment with limited server bandwidth. The available transmission rates and buffer sizes available in the server are set in various ways and evaluated by the number of fps changes, the minimum fps, the average fps, and fps variability. As a result of the comparison, the proposed algorithm showed excellent average fps and fps variability.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.4
• /
• pp.53-66
• /
• 1996

World Wide Web is a total solution for multi-media data transmission on Internet. Because of its characteristics like ease of use, support for multi-media data and smart graphic user interface, WWW has extended to cover all kinds of applications. The Secure Information Center(SIC) is a data transmission system using conventional cryptography between client and server on WWW. It's main function is to support the encryption of sending data. For encryption of data IDEA(International Data Encryption Algorithm) is used and for authentication mechanism MD5 hash function is used. Since Secure Information Center is used by many users, conventional cryptosystem is efficient in managing their secure interactions. However, there are some restrictions on sharing of same key and data transmission between client and server, for example the risk of key exposure and the difficulty of key sharing mechanisms. To solve these problems, the Secure Information Center provides encryption mechanisms and key management policies.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.337-343
• /
• 2014

This paper proposes a minimal contour tracking algorithm that reduces transmission of data for tracking mobile objects in surveillance networks in terms of detection and communication load. This algorithm perform detection for object tracking and when it transmit image data to server from camera, it minimized communication load by reducing quantity of transmission data. This algorithm use minimal tracking area based on the kinematics of the object. The modeling of object's kinematics allows for pruning out part of the tracking area that cannot be mechanically visited by the mobile object within scheduled time. In applications to detect an object in real time,when transmitting a large amount of image data it is possible to reduce the transmission load.