• The Journal of the Convergence on Culture Technology
• /
• 제10권1호
• /
• pp.551-557
• /
• 2024

Hydrogen is a renewable energy source with various characteristics such as clean, carbon-free and high-energy, and is internationally recognized as a "future energy". With the rapid development of the hydrogen energy industry, more hydrogen infrastructure is needed to meet the demand for hydrogen. However, hydrogen infrastructure accidents have been occurring frequently, hindering the development of the hydrogen industry. HyRAM+, developed by Sandia National Laboratories, is a software toolkit that integrates data and methods related to hydrogen safety assessments for various storage applications, including hydrogen refueling stations. HyRAM+'s physics mode simulates hydrogen leak results depending on the hydrogen refueling station components, graphing gas plume dispersion, jet frame temperature and trajectory, and radiative heat flux. In this paper, hydrogen leakage data was extracted from a hydrogen refueling station in Samcheok, Gangwon-do, using HyRAM+ software. A hydrogen leakage simulator was developed using data extracted from HyRAM+. It was implemented as a dashboard that shows the data generated by the simulator using a database and Grafana.

• Science of Emotion and Sensibility
• /
• 제6권3호
• /
• pp.13-20
• /
• 2003

In an experimental study, we assessed human sensibility in terms of psychophysiological response according to change of speeds (40, 70, 100km/h) in a driving simulator and application of motion fitters (washout filter, non-washout later) in a roller coaster simulator. For the driving and roller coaster simulators, a group of 12 healthy men in their twenties and a group of 8 healthy men in their twenties, respectively, participated. Participants each completed a simulator sickness questionnaire (SSQ), a subjective assessment of sensations of pleasantness, tension, and arousal, and perception of speed. Physiological signals were measured by 1/f fluctuation of EEG (electroencephalogram), ECG (electrocardiogram), and GSR (galvanic skin response). These were measured pre-to-post under the experimental conditions for each simulator. Subjective pleasantness, tension, arousal, and perception of speed and physiological responses indicating a feeling of pleasantness by 1/f fluctuation were higher for the roller coaster simulator than those measured for low speed driving in the driving simulator. The mean frequency of alpha band (8-l3㎐) in EEG increased with exposure to the driving simulator relative to that for the roller coaster simulator. Heart rate variability and GSR were significantly changed between pre- and post- under each condition in the driving and roller coaster simulators. The data suggest that subjective sensibility was elevated according to gain of speed and variety of simulator motion, and physiological responses were activated with increased speed.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권3호
• /
• pp.9-17
• /
• 2020

In this paper, as part of the research for the infrastructure of very high flexible and reconfigurable data center using very high speed crossbar switches, we developed a simulator that can model two and three dimensional connection structure of switches with an efficient control algorithm using software defined network and verified the functions and analyzed the performance accordingly. The simulator consists of a control module and a switch module that was coded using Python language based on the Mininet and Ryu Openflow frameworks. The control module dynamically controls the operation of switching cells using a shortest multipath algorithm to calculate efficient paths adaptively between configurable computing resources. Performance analysis by using the simulator shows that the three-dimensional switch architecture can accommodate more hosts per port and has about 1.5 times more successful 1:n connections per port with the same number of switches than the two-dimensional architecture. Also simulation results show that connection length in a 3-dimensional way is shorter than that of 2-dimensional way and the unused switch ratio in a 3-dimensional case is lower than that of 2-dimensional cases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.30-33
• /
• 2004

Shallow p+-n junctions were formed by low-energy ion implantation and dual-step annealing processes The dopant implantation was performed into the crystalline substrates using $BF_2$ ions. The annealing was performed with a rapid thermal processor and a furnace. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of junction depth. A new simulator is designed to model boron diffusion in silicon, which is especially useful for analyzing the annealing process subsequent to ion implantation. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. Using a resonable parameter values, the simulator covers not only the equilibrium diffusion conditions but also the nonequilibrium post-implantation diffusion. Using initial conditions and boundary conditions, coupled diffusion equation is solved successfully. The simulator reproduced experimental data successfully.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제61권6호
• /
• pp.810-816
• /
• 2012

As wind power has increased steadily, the importance of a condition monitoring system is being emphasized to maximize the availability and reliability of a wind turbine. To develop the advanced algorithms for fault detection and lifespan estimation, a wind turbine simulator is essential for verification of the proposed algorithms before applying them to a condition diagnosis & integrity prognosis system. The developed new-type simulator in this paper includes blades and various sensors as well as a motor, a gearbox and a generator of which the existing simulators generally consist. It also has similarity with a 3MW class wind turbine and can be used to acquire operational data from various operation conditions. This paper presents a design method of control logic for the wind turbine simulator, which gives a wind generation method and similar dynamic characteristics with the 3MW wind turbine. Finally, the proposed control logic is verified through experiments.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• 제54권8호
• /
• pp.388-395
• /
• 2005

It has always been of great importance in the electrical power system to educate an algorithm on the digital relaying, but it is difficult to educate an algorithm of a digital distance relay on power system because of exclusiveness of the relaying algorithm on power system. Therefore, we need a digital distance relay simulator, which can simulate the algorithm of the digital relaying on transmission line. In this Paper, we extract fundamental components using digital signal processing from data which are a variety of the simulated faults by EMTP. Then this simulator represents instantaneous values, ms values and symmetrical components that are calculated by fundamental components of voltages and currents. The Simulator also represents the zones of a digital distance relay and the locus of an impedance using GUI. Consequently, the developed simulator is particularly useful for understanding of the fundamental concepts of a distance relaying algorithm from a power system engineer points of view.

• Journal of the Korea Society of Computer and Information
• /
• 제11권2호
• /
• pp.35-42
• /
• 2006

In this paper we implement a new simulator for performance analysis of a parallel digital signal processing distributed shared memory multiprocessor systems. using Parsec The key idea of this simulator is suitable in simulation of system that uses DMA function of TMS320C6701 DSP chip and local memory which have fast access time. Also, because correction of performance parameter and reconfiguration for hardware components are easy, we can analyze performance of system in various execution environments. In the simulation, FET, 2D FET, Matrix Multiplication. and Fir Filter, which are widely used DSP algorithms. have been employed. Using our simulator, the result has been recorded according to different the number of processor, data sizes, and a change of hardware element. The performance of our simulator has been verified by comparing those recorded results.

• Journal of the Korea Society for Simulation
• /
• 제8권1호
• /
• pp.1-18
• /
• 1999

Current CIM systems need to correspond flexibly to the frequent change of demands of the customers and the fast changing informations about the production environment. The demands have brought forth CIM systems developed using object-oriented technology, with reusability, expansibility, and flexibility for the system components. Due to the fact that the OO-CIM system has been developed based on an incomplete data, the constructed system must be implemented to the actual surroundings to see how pertinent it is. Hence, this paper presents an OO-simulator as a means to evaluate the pertinency and the efficiency of the developed CIM system. The OO-simulator can determine the problems likely to occur when a developed CIM system is implemented to the actual site and evaluate the efficiency beforehand. Such properties will decrease the cost of CIM system development and increase the reliability of the system. This paper presents a framework for an OO-simulator composed of a virtual factory component embodying the characteristics of a virtual factory, a connector component for the interface between the CIM system and the simulator, a configuration component for modeling the constituent structure of the CIM system, and a timer component in charge of the time advance for the simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• 제18권3호
• /
• pp.181-187
• /
• 2012

Horse riding is widely recognized as a valuable form of education, exercise and therapy. But, the injuries observed in horse riding range from very minor injuries to fatalities. In order to reduce these injuries, the effective horseback riding simulator is required. In this paper, we proposed the implementation method of horse gait and riding aids for horseback riding robot simulator HRB-1. For implementation of horse gait to robot simulator, we gathered and modified real motion data of horse. We obtained two main frequencies of each gait by frequency analysis, and then simple sinusoidal functions are acquired by genetic algorithm. In addition, we developed riding aids system including hands, leg, and seat aids. With the help of a developed robotic system, beginners can learn the skill of real horse riding without the risk of injury.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제16권4호
• /
• pp.465-472
• /
• 2013

Since 1990, Agency for Defense Development is operating the non-magnetic laboratory for the development of key technology for the underwater magnetic stealth part, the research of the magnetic application weapons and the technical support for Korean Navy. Recently, we installed the new three-axis earth magnetic field simulator and the measurement system in the non-magnetic laboratory which is replacing the existing outdated facility. In this paper, we deal with the detailed design result of the earth magnetic field simulator and the measurement system. Also, we describe the effective method to separate the permanent and the induced magnetic field from the measured data for a scaled model ship using the earth magnetic field simulator and the measurement system.