• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.689-694
• /
• 2014

DDoS attacks on MANET makes disable any node which support network function, cause critical results as a stopping of entire network service or separation to some parts. Packet aggregation, which gather some pieces of short length into a certain length of data, improves transmission performances on MANETs. In this paper, some effects on transmission performance of packet aggregation transmission be caused by DDoS Attacks are measured and analyzed in point of end-to-end level. MANET simulator, based on NS-2, is used for measurement end-to-end performances. MOS, connection rate, delay and packet loss rate is used as performance parameters. VoIP traffic is used for object service measurement. Finally, it is suggested that number of packet aggregation is more then 4 for keeping the transmission quality over MANETs under DDoS attacks.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2017

Since year 2016, in Korea, the police department started to use drones to patrol violated vehicles on the highway area. They monitor vehicle drivers who use side ways on the highway during traffic congested hours of the season, drunken drivers, or violent drivers. They use the 'Spot Mobility' method which floats the drones for 30 minute period. However, this method is inefficient since it requires manually charging batteries, gathering data, and operate drones with many numbers of policeman. Therefore, in this paper, for the efficient patrol in this purpose, I have suggested an effectively manageable network system consists of many drones as the wireless network nodes and with small numbers of policeman in a wide highway area. To accomplish this, the two topologies of effective drone patrol network systems are designed and simulated in OPNET simulator for performance evaluation.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.47-63
• /
• 1994

An important parameter in characterizing mobile communication channel is delay spread. This paper presents the results of measured delay profiles and calculated distribution funcations of delay spread for typical cellular service environments at Taejon and vicinities. The measurement system uses 1023 chip length, 5 Mbps PN code and sliding correlation method. It has been evaluated by using commercial hardware channel simulator for reliability of out data. As results the value of mean delay spread is 2.08 $\mu\textrm{s}$for suburban area. 2.12 $\mu\textrm{s}$ for urban area and 1.3 $\mu\textrm{s}$ for national/local road. Delay spread is less then 3.4$\mu\textrm{s}$, 2.8$\mu\textrm{s}$ and 1.5 $\mu\textrm{s}$ for probability of 50% and 4.5$\mu\textrm{s}$, 4.2$\mu\textrm{s}$ and 2.9$\mu\textrm{s}$ for probability of 90% at each tested site. The difference of delay spread is within 7% between going and returning status along same street. In this experiment, we found delay spread for suburban area is larger than reported foreign test results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.86-99
• /
• 2011

Due to the uncertainty of intention recognition for behaviors of users, the intention is differently recognized according to the situation for the same behavior by the same user, the accuracy of user intention recognition by minimizing the uncertainty is able to be improved. This paper suggests a novel ontology-based method to recognize user intentions, and able to minimize the uncertainties that are the obstacles against the precise recognition of user intention. This approach creates ontology for user intention, makes a hierarchy and relationship among user intentions by using RuleML as well as Dynamic Bayesian Network, and improves the accuracy of user intention recognition by using the defined RuleML as well as the gathered sensor data such as temperature, humidity, vision, and auditory. To evaluate the performance of robot proactive planning mechanism, we developed a simulator, carried out some experiments to measure the accuracy of user intention recognition for all possible situations, and analyzed and detailed described the results. The result of our experiments represented relatively high level the accuracy of user intention recognition. On the other hand, the result of experiments tells us the fact that the actions including the uncertainty get in the way the precise user intention recognition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.378-383
• /
• 2004

Orthogonal Frequency Division Multiplexing (OFDM) transmits high-speed data by splitting the transmission bandwidth into a number of subcarriers. The bandwidth of each subcarrier is ensured to be smaller than the coherence bandwidth. This paper presents an OFDM system incorporated with the Carrier Interferometry (CI) codes to improve the performance by enhancing frequency diversity effect. The performances of CI-OFDM with multilevel modulations are investigated in highly dispersive fading channels. For the investigation of performance improvement of CI-OFDM, a simulator has been developed using a well-known SPW simulation platform. The simulation results show that the CI-OFDM provides both performance improvement and robustness against dispersive fading channel behavior. The performance of CI-OFBM with multilevel modulations demonstrates that CI-OFDM outperforms a traditional OFDM system, particularly in highly dispersive channels. With a relatively large delay spread of 151㎱ compared to the guard interval of 800㎱, CI-OFDM provides a BER of 10$^{-3}$ if sufficient signal power is present.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1390-1398
• /
• 2010

We present the concept of applying Wireless Mesh Networking (WMN) technology into Smart Grid, which is recently rising as a potential technology in various areas thanks to its advantages such as low installation costs, high scalability, and high flexibility. Smart Grid is an intelligent, next-generation electrical power network that can maximize energy efficiency by monitoring utility information in real-time and controlling the flow of electricity with IT communications technology converged to the existing power grid. WMNs must be designed for Smart Grid communication systems considering not only the high level of reliability, QoS support and mass-data treatment but also the properties of the traditional power grid. In addition, it is essential to design techniques based on international standards to support interoperability and scalability. In this paper, we evaluate the performance of IEEE 802.11s based Smart Grid Mesh Networks by conducting preliminary simulation studies with the ns-3 simulator. We also outline some challenging issues that should be reviewed when considering WMNs as the candidate for Smart Grid communication infrastructure.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.5
• /
• pp.169-178
• /
• 2014

In this paper, we present a research utilizing decentralized LTL specifications for ensuring a quality for interaction-centralized system. In this system, for ensuring the quality, we need to validate interactions between modules of the system and then we should check whether the system achieves the expected requirements. This task remains difficult and labor-intensive and requires an expert. In this paper, we present a method to assist such a task. First of all, the requirements of the system is written as multiple LTL specifications. Interactions between modules mean that behaviors of one module are related with other one's behavior. We generate the automaton model fully achieving specification through GR(1) synthesis. And we simulate them using the simulator based on the software agent for checking behaviors of the system. Finally, we validate the whole system whether it achieves given requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.10-27
• /
• 2005

In this paper, we propose a high level design architecture of WCDMA(UMTS) base station modem and synchronization algorithms applied to the proposed architecture. Also analysis of each synchronization algorithm and performance evaluation of fixed point designed modem are shown. Since the target system is base station modem, each synchronization algorithm is designed for its stable operation. To minimize implementation complexity, optimum fixed point design for best operation of synchronization algorithms is performed. We performed symbol level link simulation with fixed point designed modem simulator for data rate of 12.2kbps, 64kbps, 144kbps, and 384kbps. We compared performance results to the minimum requirements specified in 3GPP TS 25.104(Release 5). Extensive computer simulation shows that the proposed modem architecture has stable operation and outperform the minimum requirement by 2 dB. The proposed modem architecture has been applied in the implementation of WCDMA reverse link receiver modem chip successfully.

• Convergence Security Journal
• /
• v.13 no.1
• /
• pp.37-43
• /
• 2013

In 2010, the Ministry of National Defense decided to build a MegaCenter including the cloud computing technology by 2014, as part of the '2012 Information Service Plan', which is now underway. The Cloud computing system environment should be designed applying cloud computing technology and policy for an efficient infrastructure that many IT resources are available in the data center as a concentrated form. That is, the system should be designed in such a way that clouding services will be efficiently provided to meet the needs of users and there will not be unnecessary waste of resources. However, in order to build an optimal system, it should be possible to predict the service performance and the resource availability at the initial phase of system design. In this paper, using the CloudAnalyst simulator to predict availability of the K-defence cloud computing system service, conducts cloud modeling and analysis of the 'Facebook', one of the most famous social network service applications with most users in the world. An Optimal K-Defense cloud computing design model is proposed through simulation results.

• Journal of Digital Contents Society
• /
• v.18 no.3
• /
• pp.607-612
• /
• 2017

The use of RaspberryPi in building an embedded system may be difficult for users in understanding the circuit and the hardware cost. This paper proposes a solution that can test the systems virtually. The solution consists of three elements; (i) editor, (ii) interpreter and (iii) simulator and provides nine full modules and also allows the users to configure/run/test their own circuits like real environment. The task of abstraction for modules through the actual circuit test was carried out on the basis of the data sheet and the specification provided by the manufacturer. If we can improve the level of quality of our solution, it can be useful in terms of cost reduction and easy learning. To achieve this end, the electrical physics engine, the level of interpreter that can be ported to the actual board, and a generalization of the simulation logic are required.