• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.545-552
• /
• 2015

Process modeling and simulation is a powerful methodology to quantitatively predict the change of process variables when operating and design conditions are changed. In this study, considering drawbacks of currently used process simulator for combined cycle plants, we developed process modeling system equipped with an ease of use and flexibility for model development. For this purpose, the analysis of combined cycle processes was carried out and consequently, mathematical models and libraries were developed. Furthermore, in view of the fact that the level of the abstraction of process models depends on the purpose of simulation as well as the available data, simple and rigorous models were also developed for some important units. In use of reference combined plant, we executed process simulation using the developed modeling system and the comparison was made between the results of simulation and the reference data. Less than 1% marginal error was identified and we concluded that the modeling system can be applied for commercial combined cycle processes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.169.1-169.1
• /
• 2010

Geothermal heat pump(GHP)system has been extensively disseminated due to the recent increasing demand over new and renewable energy. However, the economics and system reliability has been key issues and barriers to insure a better system performance as designed originally. The building integrated designs of geothermal heat pump system are test and optimize GHP system by evaluating its performance in virtual reality. System design is an iterative process that will help optimize the cost efficiency of the system. One of the primary goals is to minimize the energy imbalance between the amount of energy extracted from the ground and the energy reject to it. This will reduce the land area required to install the GHX, reduce the cost of installing it and ensure the long-term efficiency of the system. Commissioning is the process of ensuring that are designed, installed, functionally tested, and capable of being operated and maintained to performance in conformity with design intent. In this paper, Study on introduction of Initial commissioning method of Geothermal Heat Pump(GHP) system using ISO performance data has been introduced. Also KIER GHP Simulator is used to simulate actual heat pimp operating condition and test commissioning method. Result should that the experiment data base could verify the applicability of the commissioning method, and also were able to suggest a better ways to GHP commissioning.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.19-27
• /
• 2011

WiBro is a wireless mobile communication system which supports a high data rate and high mobility in anywhere and anytime. Although WiBro system provides multimedia service including data, audio and video services, customers require better service quality in WiBro system. But, many researches have theoretically evaluated the performance of WiBro system without systematic studies by simulation. Therefore, in this paper, we evaluate a performance of WiBro system using OPNET simulator. We analyze system performance according to various modulation and coding schemes, and propose Adaptive Modulation and Coding (AMC) profile to support quality of services for user requirements. Also we evaluate the performance of WiBro system using AMC and Hybrid-Automatic Repeat Request (H-ARQ) technologies, and confirm that the proposed AMC profile can be applied to WiBro system with high performance.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.94-103
• /
• 2015

The turbulent flow characteristics in the channel flow are investigated using large eddy simulation(LES) of FDS code, built in NIST(USA), in which the near-wall flow is solved by Werner-Wengle wall function. The periodic flow condition is applied in streamwise direction to get the fully developed turbulent flow and symmetric condition is applied in lateral direction. The height of the channel is H=1m, and the length of the channel is 6H, and the lateral length is H. The total grid is $32{\times}32{\times}32$ and $y^+$ is kept above 11 to fulfill the near-wall flow requirement. The Smagorinsky model is used to solve the sub-grid scale stress. Smagorinsky constant $C_s$ is 0.2(default in FDS). Three cases of Reynolds number(10,700, 26,000, 49,000.), based on the channel height, are analyzed. The simulated results are compared with direct numerical simulation(DNS) and particle image velocimetry(PIV) experimental data. The linear low-Re eddy viscosity model of Launder & Sharma and non-linear low-Re eddy viscosity model of Abe-Jang-Leschziner are utilized to compare the results with LES of FDS. Reynolds normal stresses, Reynolds shear stresses, turbulent kinetic energys and mean velocity flows are well compared with DNS and PIV data.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.71-80
• /
• 2004

This paper describes embedded processor architecture design which is applicable to multimedia in mobile platform The main description is based on basic processor architecture and consideration about energy efficiency when used in mobile platform To design processor data path architecture (pipeline, branch prediction, multiple issue superscalar, function unit number) which is optimal to multimedia application and cache hierarchy and its structure, we have nut the simulation with variant architecture using MPEG4 test bench as multimedia application. We analyzed energy efficiency of architecture to check if it is applicable to mobile platform and decide basic processor architecture based on analysis result. The suggested basic processor architecture not only can be applied to mobile platform but also can be applied to basic processor architecture of configurable processor which is designed through automatic design environment.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1177-1187
• /
• 2010

Flash memory becomes popular storage for small devices due to its efficiency, portability, low power consumption and large capacity. Unlike on hard disks, however, write operation on flash memory is much more expensive than read operation, so that it is critical for performance enhancement to reduce the number of executions of write operation. This paper proposes static analysis to rewrite a program to reduce the total number of write operations by merging writable data in a minimum number of pages. To achieve this, we collect information about writable areas by static analysis, and about frequently executed paths by profiling for practicality, and combine both to rewrite the application program to reallocate data. The performance enhancement gained from the proposed methods is shown using a FAST simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1393-1399
• /
• 1999

In this paper, a VLSI design of the convolutional codec chip of code rate r=l/3, and constraint length K=9 is presented, which is able to correct errors of the received data when transmitted data is corrupted in channels. The circuit design mainly aimed for simple implementation. In the decoder, Viterbi algorithm with 3-bit soft-decision is employed. For information sequence updating and storage, the register exchange method is employed, where the register length is 5$\times$K(45 stages). The codec chip is designed using VHDL language and Design Analyzer and VHDL Simulator of Synopsys are used for simulation and synthesis. The chip is composed of ENCODER block, ALIGN block, BMC block, ACS block, SEL_MIN block and REG_EXCH block. The operation of the codec chip is verified though the logic simulations, where several error conditions are assumed. As a result of the timing simulation after synthesis, the decoding speed of 325.5Kbps is achieved, and 6,894 gates is used.

• Journal of KIISE:Information Networking
• /
• v.34 no.4
• /
• pp.262-268
• /
• 2007

The efficient node-energy utilization in wireless sensor networks has been studied because sensor nodes operate with limited power based on battery. To extend the lifetime of the wireless sensor networks, maintaining balanced power consumption between sensor nodes is more important than reducing total energy consumption of the overall network. Since a large number of sensor nodes are densely deployed and collect data by cooperation in wireless sensor network, keeping more sensor nodes alive as possible is important to extend the lifetime of the sensor network. In this paper, we submit an efficient energy aware routing protocol based on AODV ad hoc routing protocol for wireless sensor networks to increase its lifetime without degrading network performance. The proposed protocol is designed to avoid traffic congestion on minor specific nodes at data transfer and to make the node power consumption be widely distributed to increase the lifetime of the network. The performance of the proposed protocol has been examined and evaluated with the NS-2 simulator in terms of network lifetime and end-to-end delay.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.322-331
• /
• 2013

Wireless Mesh Networks(WMNs) is generally composed of radio nodes in the mesh topology. WMNs consists of mesh client, mesh router and gateway connected to a wired network. Each client and router relay messages to the gateway for communication. WMNs is widely used recently in many areas can provide extended coverage based on multi-hop communication and ubiquitous communication at any time and any location. However the competition and collision between each node to transmit data is inevitable when the same channel is used for transmission. The transmission opportunities and the throughput of nodes located far from gateway decrease more if the communication channel is accessed based on competitive CSMA/CA scheme using DCF(Distributed Coordination Function) provided by IEEE 802.11 MAC. In this paper, we improve the performance of the TCP fairness and throughput of the nodes with more than 2 hops by applying various algorithms for controlling contention window values. Also, we evaluate the performance using ns-2 simulator, According to the results, proposed scheme can enhance the fairness characteristic of each node irrespective of data to the gateway.

• Journal of computational fluids engineering
• /
• v.21 no.4
• /
• pp.1-10
• /
• 2016

The analysis of characteristics of turbulent flow and thermal boundary layer for natural convection caused by fire along vertical wall is performed. The 4m-high vertical copper plate is heated and kept at a uniform surface temperature of $60^{\circ}C$ and the surrounding fluid (air) is kept at $16.5^{\circ}C$. The flow and temperature is solved by large eddy simulation(LES) of FDS code(Ver.6), in which the viscous-sublayer flow is calculated by Werner-Wengle wall function. The whole analyzed domain is assumed as turbulent region to apply wall function even through the laminar flow is transient to the turbulent flow between $10^9$<$Gr_z$<$10^{10}$ in experiments. The various grids from $7{\times}7{\times}128$ to $18{\times}18{\times}128$ are applied to investigate the sensitivity of wall function to $x^+$ value in LES simulation. The mean velocity and temperature profiles in the turbulent boundary layer are compared with experimental data by Tsuji & Nagano and the results from other LES simulation in which the viscous-sublayer flow is directly solved with many grids. The relationship between heat transfer rate($Nu_z$) and $Gr_zPr$ is investigated and calculated heat transfer rates are compared with theoretical equation and experimental data.