• Structural Monitoring and Maintenance
• /
• v.2 no.1
• /
• pp.19-34
• /
• 2015

One of the main causes of a limited use of nondestructive evaluation (NDE) technologies in bridge deck assessment is the speed of data collection and analysis. The paper describes development and implementation of the RABIT (Robotics Assisted Bridge Inspection Tool) for data collection using multiple NDE technologies. The system is designed to characterize three most common deterioration types in concrete bridge decks: rebar corrosion, delamination, and concrete degradation. It implements four NDE technologies: electrical resistivity (ER), impact echo (IE), ground-penetrating radar (GPR), and ultrasonic surface waves (USW) method. The technologies are used in a complementary way to enhance the interpretation. In addition, the system utilizes advanced vision to complement traditional visual inspection. Finally, the RABIT collects data at a significantly higher speed than it is done using traditional NDE equipment. The robotic system is complemented by an advanced data interpretation. The associated platform for the enhanced interpretation of condition assessment in concrete bridge decks utilizes data integration, fusion, and deterioration and defect visualization. This paper concentrates on the validation and field implementation of two NDE technologies. The first one is IE used in the delamination detection and characterization, while the second one is the USW method used in the assessment of concrete quality. The validation of performance of the two methods was conducted on a 9 m long and 3.6 m wide fabricated bridge structure with numerous artificial defects embedded in the deck.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.3
• /
• pp.23-33
• /
• 2021

Purpose: In the course of the domestic environmental impact assessment, the current status survey was improperly conducted, and the issue of false and inaccurate environmental impact assessment reports has been raised several times recently through media reports. Research design, data and methodology: There is a continuous demand for improvement measures for the current status measurement method, such as having difficulties in securing a normal measurement date in consideration of equipment operation and rainfall days in the field. Results: In addition, in order to grasp the general air quality status of the evaluation target area, it is necessary to check the various current status concentrations by season and time series per year. However, there is a problem that is currently being carried out based on limited results such as measurement for 1 day or 3 days. Conclusions: Therefore, in this study, based on the national atmospheric measurement network, an inverse distance weighted (IDW) interpolation method was applied to calculate the current state concentration. This study suggested a method to use it in preparing the air quality item in the environmental impact assessment report.

• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.61-74
• /
• 2000

This study compares the results of environmental impact assessment with the results of post-environmental investigation, using the case of Taean thermal power plant construction. The atmospheric and water qualities were not greatly changed before and after the construction of the power plant. However, the site of the highest concentration predicted by the atmospheric quality modeling in environmental impact assessment was different from that after operation of 4 power plants. There was also a difference in the diffusion range of thermal discharge water between the measured result(1km) and the predicted value(1.5km) with the model. Thus, environmental impact evaluation should be based on long-term (more than a year) environmental monitoring data. For the modeling of atmospheric quality and numerical thermal discharge water diffusion, appropriate models for each plant should be selected and the numerical modeling should be accompanied by computer simulation, wind tunnel test, etc. Moreover, environmental evaluation should focus more on the degree of impact on surroundings than the prediction of changes in surroundings caused by operation of plants.

• Journal of Korean Society for Quality Management
• /
• v.26 no.4
• /
• pp.189-201
• /
• 1998

Quality of radiological services can be assessed by various agents, so called medical doctors, radiologists, patients and others. However radiological services are provided by radiologists to patients and medical doctors. This study was based on data which were collected from assessment of 142 radiologists working in the health care services organization and 149 patients who visited the same organization about radiological services, with self-administered structured questionnaire. This study was planned to analyze of radiological services factors and to develop a methodology for measuring the level of quality in the radiological health care services.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.65-75
• /
• 2006

Transparency on the Total System Performance Assessment (TSPA) is the key issue to enhance the public acceptance for a radioactive repository. To approve it, all performances on TSPA through Quality Assurance is necessary. The integrated Cyber R&D Platform is developed by KAERI using the T2R3 principles applicable for five major steps : planning, research work, documentation, and internal & external audits in R&D's. The proposed system is implemented in the web-based system so that all participants in TSPA are able to access the system. It is composed of three sub-systems; FEAS (FEp to Assessment through Scenario development) showing systematic approach from the FEPs to Assessment methods flow chart, PAID (Performance Assessment Input Databases) being designed to easily search and review field data for TSPA and QA system containing the administrative system for QA on five key steps in R&D's in addition to approval and disapproval processes, corrective actions, and permanent record keeping. All information being recorded in QA system through T2R3 principles is integrated into Cyber R&D Platform so that every data in the system can be checked whenever necessary. Throughout the next phase R&D, Cyber R&D Platform will be connected with the assessment tool for TSPA so that it will be expected to search the whole information in one unified system.

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.71-78
• /
• 2011

This paper aims to assessing impact of reduction of non-point source pollution in the Bokha Stream watershed. The BASINS/HSPF model was calibrated and verified for water flow and water qualities using Total Maximum Daily Load 8days data from 2006 to 2007. Accuracy of the BASINS/HSPF models in simulating hydrology and water quality was compared and there were somewhat differences of statistical results, but water flow and water quality were simulated in good conditions over the study period. The applicability of models was tested to evaluate non-point source control scenarios to response hydrology and water quality in the Bokha stream using various measures which include BMPs approach and change of landuse. The evaluation of reduction of non-point source pollution was developed using load-duration curve. Despite strong reduction of non-point source, there are not satiated target quality at low flow season.

• Journal of Korean Society on Water Environment
• /
• v.35 no.6
• /
• pp.589-597
• /
• 2019

The purpose of this study was improve accuracy the IOPs inversion model(IOPs-IM) developed in 2016 for phycocyanin(PC) concentration estimation in the Nakdong River. Additionally, two optimum models were developed and evaluated with 2017 measurement field spectral data for the Geum River and the Yeongsan River. The used measurement data for IOPs-IM analyzation was randomly classified as training and verification materials at the ratio of 2:1 in all data sets. Using the training data set from 2015-2017, accuracy results of the IOPs-IM generally improved for the Nakdong River. The RMSE(Root Mean Square Error) decreased by 14 % compared to 2016. For the GeumRiver, the results of the IOPs-IM were suitable, except for some point results in 2016. Results of the IOPs-IM in the Yeongsan River followed the overall 1:1 line and MAE(Mean Absolute Error) was lower than other rivers. But the RMSE and MAE values were higher. As a result of applying the validation data to the IOPs-IM, the accuracy of the Nakdong River was reduced to RMSE 17.7 % and MRE 16.4 %, respectively compared with 2016. However, the MRE(Mean Relative Error) was estimated to be higher by 400 % in the Geum River, and the RMSE was more than 100 mg/㎥ of the Yeongsan River. Therefore, it is necessary to get the continuously data with various sections of each river for obtain objective and reliable results and the models should be improved.

• Informatization Policy
• /
• v.22 no.1
• /
• pp.28-46
• /
• 2015

Although the demand for the use of public data increases in accordance with the expansion of Government 3.0, the poor level of data quality and its management currently implemented is becoming obstacles to opening data to the public. To improve the efficiency of management, linkage and usage for data, standardized processes for data quality management have to be prepared and appropriate data quality assessment criteria should be established. In this paper, we propose the organizational maturity model that can assess the public data quality management level. This model consists of the process reference model and the measurement framework. Fifteen processes grouped by the PDCA cycle are defined in the process reference model. The measurement framework measures the organizational maturity level based on process capability levels. The organizational maturity model can be used to establish objectives and directions for public data quality improvement by diagnosis of current level of public data quality management and problem solving. This model can also facilitate open to the private sector and activate usage of stable public data through reliability enhancement.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.537-546
• /
• 2013

In the Seoul Metropolitan Area(SMA) photochemical air pollutants, nitrogenic compound and particulate matters have increased substantially due to mobile sources, power plants and so on. Therefore 'Special Act on Seoul Metropolitan Air Quality Improvement' was enacted on 2003 in order to improve air quality in the SMA. According to the Special Act, Central and local government have developed the state implementation plan(SIP) to reduce air pollutant emissions from various local sources. One of the key elements of the SIP development is the air quality modeling since modeling results can be used to establish emissions control strategies as well as to demonstrate attainment of air quality goals for ozone, particulate matter, and so on. Air quality modeling, therefore, can be usefully utilized to investigate the effects of government's efforts according to control strategies or measures. Using the air quality model, we can determine whether the implementation plan should be revised or not. A number of questions, however, has been raised concerning accuracy, consistency and transparency of modeling results because if we do not trust modeling results, all the measures dependent on modeling becomes in vain. So, without dealing with these questions, we can not guarantee the reliability and utilizability of air quality modeling results. In this study, we tried to establish standard methodology for air quality modeling in order to ensure consistency and transparency of modeling results used in the development and evaluation of national air policy. For this purpose, we established air quality modeling guideline to provide or recommend modeling procedures, vertical and horizontal domains, input data of meteorological and air quality modeling and so on.

• Journal of the Korean Society for Library and Information Science
• /
• v.41 no.3
• /
• pp.55-79
• /
• 2007

In this study the need for new service qualify assessment scale is investigated to cope with the paradigm change in library information service and the dimension and model for e-service quality assessment applicable to a digital library are developed. In order to verify newly proposed dimension and model for e-service qualify assessment, the dimension which is developed by employing data collected from NDSL(National Digital Science Library) and its factor are analyzed and casuality analysis between independent and dependent variables is executed based on the proposed e-service qualify model We also analyze the gap between customer's ideal expectation and perception and, finally investigate what is the most important dimension among e-service quality in the digital library from the customer's point of view.