• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.825-832
• /
• 2012

GPS signal delay that caused by dry gases and water vapor in troposphere is a main error source of GPS point positioning and it must be eliminated for precise point positioning. In this paper, we implemented to generate tropospheric delay grid map over the Korean Peninsula based on post-processing method by using the GPS permanent station network in order to determine the availability of tropospheric delay generation algorithm. GIPSY 5.0 was used for GPS data process and nationwide AWS observation network was used to calculate the amount of dry delay and wet delay separately. As the result of grid map's accuracy analysis, the RMSE between grid map data and GPS site data was 0.7mm in ZHD, 7.6mm in ZWD and 8.5mm in ZTD. After grid map accuracy analysis, we applied the calculated tropospheric delay grid map to single frequency relative positioning algorithm and analyzed the positioning accuracy enhancement. As the result, positioning accuracy was improved up to 36% in case of relative positioning of Suwon(SUWN) and Mokpo(MKPO), that the baseline distance is about 297km.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.873-881
• /
• 2023

The evolution of civil engineering technology, exemplified by recent milestones like the completion of the Gangnam Global Business Center (GBC), has fostered the construction of expansive civil and architectural structures both above and below the earth's surface. This surge in construction necessitates a commensurate advancement in research and technology pertaining to safety protocols applicable to these vast edifices. Such protocols encompass a spectrum of concerns, ranging from the preemptive mitigation of accidents to the effective management of exigencies such as fires. As the trajectory of construction endeavors continues unabated, encompassing both subterranean and elevated domains, a concomitant imperative emerges to refine the methodologies underpinning precise indoor positioning. To address this need, an innovative web-based simulator has been devised to emulate indoor positioning scenarios for rigorous testing. This research further entails the development of an indoor positioning data Application Programming Interface (API) fortified by Geographic Information System (GIS) spatial operation techniques. This API is anchored in the construction of intricate test data, centered on the spatial layout of building 13 at the Electronics and Telecommunications Research Institute (ETRI). Consequently, the study renders feasible the expeditious provisioning of diverse signal-based and image-based spatial information, pivotal for enhancing the navigational acumen of mobile devices. Path delineation, cellular signal mapping, landmark identification, and ancillary navigational aids are among the manifold datasets promptly furnished by the indoor positioning data API. In summation, this study engenders a crucial leap towards the fortification of safety protocols and navigational precision within the expansive confines of modern architectural wonders.

• Korean Management Science Review
• /
• v.29 no.2
• /
• pp.79-90
• /
• 2012

Focusing on the rapid market penetration of smart phones, the importance of LBS (Location Based Service) is drastically increased. However, traditional GPS method has critical weakness caused by limited availability, such as indoor environment. WPS is newly attractive method as a widely applicable positioning method. In WPS, RSSI (Received Signal Strength Indication) data of all Wi-Fi APs (Access Point) are measured and stored into a huge database. The stored RSSI data in database make single radio fingerprint map. By the radio fingerprint map, we can estimate the actual position of target point. The essential factor of radio fingerprint database is data integrity of RSSI. Because of millions of APs in urban area, RSSI measurement data are seriously contaminated. Therefore, we present the unified filtering method for RSSI measurement data. As the results of filtering, we can show the effectiveness of suggested method in practical positioning system of mobile operator.

• Korean Management Science Review
• /
• v.33 no.1
• /
• pp.49-58
• /
• 2016

Focusing on the drastic increase of smart devices, machine generated data expansion is a general phenomenon in network services and IoT (Internet of Things). Especially, built-in multi sensors in a smart device are used for collection of user status and moving data. Combining the internal sensor data and environmental information, we can determine landmarks that decide a pedestrian's locations. We use an ANOVA method to analyze data acquired from multi sensors and propose a landmark classification algorithm. We expect that the proposed algorithm can achieve higher accuracy of indoor-outdoor positioning system for pedestrians.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.287-293
• /
• 2018

This paper presents a satellite relative navigation strategy for formation flying, which chooses an appropriate navigation algorithm according to the operating environment. Not only global positioning system (GPS) measurements, but laser measurements can also be utilized to determine the relative positions of satellites. Laser data is used solely or together with GPS measurements. Numerical simulations were conducted to compare the relative navigation algorithm using only laser data and laser data combined with GPS data. If an accurate direction of laser pointing is estimated, the relative position of satellites can be determined using only laser measurements. If not, the combined algorithm has better performance, and is irrelevant to the precision of the relative angle data between two satellites in spherical coordinates. Within 10 km relative distance between satellites, relative navigation using double difference GPS data makes more precise relative position estimation results. If the simulation results are applied to the relative navigation strategy, the proper algorithm can be chosen, and the relative position of satellites can be estimated precisely in changing mission environments.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.4
• /
• pp.221-233
• /
• 2016

This paper deals with performance assessment of the kinematic network-based GPS positioning technique with a view to using it for ellipsoidally referenced bathymetric surveys. To this end, two field trials were carried out on a land vehicle and a surveying vessel. Single-frequency GPS data acquired from these tests were processed by an in-house software which equips the network modeling algorithm with instantaneous ambiguity resolution procedure. The results reveals that ambiguity success rate based on the network model is mostly higher than 99.0%, which is superior to that of the single-baseline model. In addition, achievable accuracy of the technique was accessed at ${\pm}1.6cm$ and 2.7 cm with 95% confidence level in horizontal and vertical component respectively. From bathymetric survey at the West Nakdong River in Busan, Korea, 3-D coordinates of 2,011 points on its bed were computed by using GPS-derived coordinates, attitude, measured depth and geoid undulation. Note that their vertical coordinates are aligned to the geoid, the so-called orthometric height which is widely adopted in river engineering. Bathymetry was constructed by interpolating the coordinate set, and some discussion on its benefit was given at the end.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.75-82
• /
• 2016

Visible light communication (VLC) using LED lamps is suitable for implementing an indoor positioning system in an indoor environment where the global positioning system (GPS) signal does not reach. In this paper, we present an indoor positioning system for mobile robots using a VLC beacon and fuzzy rules. This system consists of an autonomous mobile robot, VLC modules, and device application software. Fuzzy rules are applied to plan the global and local paths along which the mobile robot navigates indoors. The VLC transmitter modules are attached to the wall or the ceiling as beacons to transmit their own location information. The variable pulse position modulation (VPPM) algorithm is used to transmit data, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The mobile robot has a receiver module to receive the location information while performing its mission in the environment where VLC transmitters are deployed.

• Journal of Information Technology Applications and Management
• /
• v.15 no.2
• /
• pp.51-65
• /
• 2008

The purpose of this paper is introducing WiFi based EKF(Extended Kalman Filter) method for indoor positioning. The advantages of our EKF method include: 1) Any special equipment dedicated for positioning is not required. 2) implementation of EKF does not require off-line phase of fingerprinting methods. 3) The EKF effectively minimizes squared deviation of the trilateration method. In order to experimentally prove the advantages of our method, we implemented indoor positioning systems making use of the K-NN(K Nearest Neighbors), Bayesian, decision tree, trilateration, and our EKF methods. Our experimental results show that the average-errors of K-NN, Bayesian and decision tree methods are all close to 2.4 meters whereas the average errors of trilateration and EKF are 4.07 meters and 3.528 meters, respectively. That is, the accuracy of our EKF is a bit inferior to those of fingerprinting methods. Even so, our EKF is accurate enough to be used for practical indoor LBS systems. Moreover, our EKF is easier to implement than fingerprinting methods because it does not require off-line phase.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.743-750
• /
• 2009

Since aerial photogrammetry by analog camera began in 1972, recently, high resolution digital camera is actively introduced to improve efficiency of aerial photogrammetry. This study investigated the 3D positioning accuracy of DMC(Digital Mapping Camera) among various high resolution aerial digital cameras to be developed for photogrammetry. For the research, we installed control points in test field around Incheon, and acquired analog and digital aerial photographs. By comparing 3D positioning accuracies of analog and digital photographs, there are few difference between two cameras, and the 3D positioning accuracies of two cameras was somewhat increased in case of aerotriangulation using additional control points based on GPS/IMU EO data.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.1
• /
• pp.15-21
• /
• 2020

In October 2019, the European Galileo navigation system operates a total of 24 satellites, two of them are in the testing phase. There are enough satellites in operation to enable precise point positioning (PPP) using Galileo signals. The number of visible satellites for Galileo in South Korea is investigated. In addition, to assess the latest performance of the Galileo kinematic PPP, data received at DAEJ reference station from October 1 to October 7, 2019, are analyzed. Galileo kinematic PPP presents some results in two categories, single-frequency PPP (SPPP) and dual-frequency PPP (DPPP). The positioning accuracy for Galileo kinematic SPPP solutions is less than 1 m root mean square (RMS) in all direction components. The Galileo kinematic DPPP achieves the positioning accuracy with an RMS value of less than 7 cm in all direction components. The results show that the latest performance of Galileo kinematic PPP at DAEJ station in South Korea is still relatively poor compared to GPS kinematic PPP. However, the residuals of Galileo code measurements are smaller than those of GPS code measurements.