• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.3
• /
• pp.167-174
• /
• 2021

In this study, the amount and frequency characteristics of cloud cavitation formed on a navy ship rudder were investigated through cavitation image processing technique and cavitation noise analysis. A high-speed camera with high time resolution was used to observe the cavitation on a full-spade rudder. The deflection angle range of the full-spade rudder was set to 8 to 15 degrees so that cloud cavitation was generated on the rudder surface. For images taken at 10⁴ fps (frame per second), reference values for detecting cavitation were defined and detected in Red, Green, Blue and Hue, Saturation, Lightness color spaces to quantitatively analyze the amount of cavitation. Intrinsic frequency characteristics of cloud cavitation were detected from the time series data of the amount of cavitation. The frequency characteristics of cloud cavitation obtained by using the image processing technique were found to be the same through the analysis of the noise signal measured by the hydrophone installed on the hull above the rudder, and its peak value was in the frequency band of 30~60Hz.

• Asia-Pacific Journal of Business
• /
• v.11 no.4
• /
• pp.65-81
• /
• 2020

Purpose - This research aims to investigate how consumers' eco-friendly product choice ratio changes as the benefits of eco-friendly products are framed as (1) non-monetary benefits, (2) monetary gain integrated with the loss or (3) monetary gain segregated from the loss. Design/methodology/approach - A mixed-design, scenario-based choice experiment was conducted. A series of chi-square tests and residual analyses were conducted to analyze the data. Findings - When the monetary gain was larger or slightly smaller than the loss, the participants' eco-friendly product choice ratio was higher when the monetary gain was integrated with the loss than those in the other two conditions. When the monetary gain was significantly smaller than the loss, the participants' eco-friendly product choice ratio was lower when the monetary gain was integrated with the loss than those in the other conditions. The ratio did not differ between the latter two conditions. Research implications or Originality - This research shows that marketers should frame the benefits of eco-friendly products and their costs in different manners depending on the relative magnitudes of them. This research also complements the existing literature by comparing the effectiveness of non-monetary framing of eco-friendly product benefits with that of monetary framing following hedonic editing hypothesis.

• Journal of Broadcast Engineering
• /
• v.26 no.6
• /
• pp.748-757
• /
• 2021

In this paper, we propose a gaze estimation network in which eye landmark position detection and gaze direction vector estimation are integrated into one deep learning network. The proposed network uses the Stacked Hourglass Network as a backbone structure and is largely composed of three parts: a landmark detector, a feature map extractor, and a gaze direction estimator. The landmark detector estimates the coordinates of 50 eye landmarks, and the feature map extractor generates a feature map of the eye image for estimating the gaze direction. And the gaze direction estimator estimates the final gaze direction vector by combining each output result. The proposed network was trained using virtual synthetic eye images and landmark coordinate data generated through the UnityEyes dataset, and the MPIIGaze dataset consisting of real human eye images was used for performance evaluation. Through the experiment, the gaze estimation error showed a performance of 3.9, and the estimation speed of the network was 42 FPS (Frames per second).

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.407-413
• /
• 2022

This study conducted empirical analysis through user experience and questionnaire to find out whether the technical and contextual elements of the 'COVID-19 SABER' VR game produced and developed through initial research affect the improvement of the user's visual immersion. As a result first, the hypotheses regarding the resolution, viewing angle, effect, and design quality of the technical elements were accepted, but the hypotheses regarding the frame rate and the brightness of the lighting were rejected. Next, as for the hypothesis of the contextual elements, the hypothesis about background, directing, color and texture, interest and fun was adopted, and the hypothesis about storytelling was rejected. In summary, it was concluded that in order to increase the visual immersion of VR games, technical elements resolution, viewing angle, effect, design quality, contextual elements background, directing, color and texture, interest and fun must be designed and produced. The results of this study are expected to serve as basic data for the production and development of VR games that can induce and improve user's visual immersion in the future.

• Steel and Composite Structures
• /
• v.43 no.3
• /
• pp.327-340
• /
• 2022

A vast amount of experimental and analytical research has been conducted related to the seismic behavior and performance of concrete filled steel tubular (CFT) columns. This research has resulted in a wealth of information on the component behavior. However, analytical and experimental data for structural systems with CFT columns is limited, and the well-known behavior of steel or concrete structures is assumed valid for designing these systems. This paper presents the development of an analytical model for nonlinear analysis of composite moment resisting frame (CFT-MRF) systems with CFT columns and steel wide-flange (WF) beams under seismic loading. The model integrates component models for steel WF beams, CFT columns, connections between CFT columns and WF beams, and CFT panel zones. These component models account for nonlinear behavior due to steel yielding and local buckling in the beams and columns, concrete cracking and crushing in the columns, and yielding of panel zones and connections. Component tests were used to validate the component models. The model for a CFT-MRF considers second order geometric effects from the gravity load bearing system using a lean-on column. The experimental results from the testing of a four-story CFT-MRF test structure are used as a benchmark to validate the modeling procedure. An analytical model of the test structure was created using the modeling procedure and imposed-displacement analyses were used to reproduce the tests with the analytical model of the test structure. Good agreement was found at the global and local level. The model reproduced reasonably well the story shear-story drift response as well as the column, beam and connection moment-rotation response, but overpredicted the inelastic deformation of the panel zone.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.91-99
• /
• 2021

In the current business environment where dependence on IT has increased rapidly, the risk from disasters or cyber-attacks is also increasing. Business continuity, the ability to continue to provide service in the event of a business disruption caused by a disaster, is essential. In other words, you need to have a plan in place to keep your core business functions uninterrupted with rapid recovery within a predetermined Recovery Time Objective (RTO) and Recovery Point Objective (RPO) time frame. In this paper, we propose a disaster recovery system construction method that can minimize RTO and RPO to ensure business continuity. The system configuration adopts Tier 7 disaster recovery model, synchronous storage replication, hot disaster recovery site, and operation management automation solution. This ensures continuity of core business with virtually no data loss and minimal RTO and RPO.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.789-802
• /
• 2022

The purpose of this study is to present implications for effective operation of domestic school-based mental health services by comparing those in Singapore the United States, Australia. Based on reviewing the public data and previous article, researchers conducted a comparative study on the background, history, goal, and managing process of overseas and domestic organizations. The result of comparison in overseas cases suggests that the foundation of school-based mental health project was laid with the national health plan and detailed frame work for implementation. It was also discussed that domestic school-based mental health project is still in introduction stage, while foreign services were delivered efficiently through the leading agency and the cooperation between government ministries and institutions were active. It suggests that cooperation between government ministries, preparation of an effective operating system, and various approaches for students, guardians and teachers are need for domestic school-based mental health project.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.91-99
• /
• 2022

By applying METHOD 514.8 of the US military standard MIL-STD-810H, vibration analysis of the winding core automatic feeding device was performed during vehicle transportation. The contact point between the LM guide and main support frame was weak in the vertical axis, transverse axis, and longitudinal axis during the transportation of the automatic winding core feeder vehicle, and the maximum equivalent stress was 236.31 MPa in the longitudinal axis. When random vibration was applied, the safety margin in the longitudinal direction was 0.26, indicating low safety. The safety margin was changed by increasing the damage factor to 0.1. Finally, the safety margin was improved to 3.48 to secure safety. Resonance occurred with a Q factor of 9.34 in the harmonic response to which the RMS value of the ASD data was input, and the vertical axis safety margin was derived as 0.16. When the damping factor was 0.15, the Q factor was 3.37, and resonance was avoided with a safety margin of 6.62.

• Journal of Industrial Convergence
• /
• v.20 no.8
• /
• pp.53-59
• /
• 2022

In order to improve players' satisfaction with the game NPC (Non Plyer Character), a Structural Equation Modeling (SEM) was made, and NPC design elements were analyzed. First, extract the design elements (entertainment, artistry, interaction, and presence) that affect player satisfaction. And it is assumed that these factors will affect the satisfaction of players, and empirical research is carried out through quantitative research ideas. The results of the analysis of the questionnaire survey data show that four elements have a meaningful impact on player satisfaction, and artistry has the greatest impact on player satisfaction. Finally, according to the analysis results, a proposal for NPC design is proposed. It is expected that this research will provide a reference frame for the design direction of NPC in the future.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1113-1116
• /
• 2009

The attempt to use a 3D model each field such as design, structure, construction, facilities, and estimation in the construction project has recently increased more and more while BIM (Building Information Modeling) that manages the process of generating and managing building data has risen during life cycle of a construction project. While the 2D Drawing based work of each field is achieved in the already existing construction project, the BIM based construction project aims at accomplishing 3D model based work of each field efficiently. Accordingly, the solution that fits 3D model based work of each field and supports plans in order to efficiently accomplish the relevant work is demanded. The estimation, one of the fields of the construction project, has applied BIM to calculate quantity and cost of the building materials used to construction works after taking off building quantity information from the 3D model by a item for a Quantity Take-off grouping the materials relevant to a 3D object. A 3D based estimation program has been commonly used in abroad advanced countries using BIM. The program can only calculate quantity related to one 3D object. In other words, it doesn't support the take-off process considering quantity of a contiguous object. In case of temporary materials used in the frame construction, there are instances where quantity is different by the contiguous object. For example, the formwork of the temporary materials quantity is changed by dimensions of the contiguous object because formwork of temporary materials goes through the quantity take-off process that deduces quantity of the connected object when different objects are connected. A worker can compulsorily adjust quantity so as to recognize the different object connected to the contiguous object and deduces quantity, but it mainly causes the confusion of work because it must complexly consider quantity of other materials related to the object besides. Therefore, this study is to propose the solution that automates the formwork 3D modeling to efficiently accomplish the quantity take-off of formwork by preventing the confusion of the work which is caused by the quantity deduction process between the contiguous object and the connected object.