• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.339-346
• /
• 1991

In this paper the performance of communication system in the electrical power line using error correcting codes is analysed. The BCH codes and interleaved code are to be used for correcting burst and random errors in the power line channels. The data rate of 2400 bps and the carrier frequency of 12KHz are assumed. Actual power line noise is recorded and simulated in the BPSK PLC system model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.617-619
• /
• 2004

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time in. Today any data storage system can not satisfy these conditions, but holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System architecture without mechanical actuating part is possible, so fast data transfer rate and high storage capacity about $1Tb/cm^3$ can be realized. In this paper, to correct errors of binary data stored in holographic digital data storage system, find cluster centers using subtractive clustering and reduce intensities of pixels around centers, so the intensify profile of data rare will be uniform and the better data storage system can be realized.

• 대한간호학회지
• /
• 제42권4호
• /
• pp.568-578
• /
• 2012

Purpose: The purpose of this cross-sectional study was to examine current status of IT-based medication error prevention system construction and the relationships among system construction, medication error management climate and perception for system use. Methods: The participants were 124 patient safety chief managers working for 124 hospitals with over 300 beds in Korea. The characteristics of the participants, construction status and perception of systems (electric pharmacopoeia, electric drug dosage calculation system, computer-based patient safety reporting and bar-code system) and medication error management climate were measured in this study. The data were collected between June and August 2011. Descriptive statistics, partial Pearson correlation and MANCOVA were used for data analysis. Results: Electric pharmacopoeia were constructed in 67.7% of participating hospitals, computer-based patient safety reporting systems were constructed in 50.8%, electric drug dosage calculation systems were in use in 32.3%. Bar-code systems showed up the lowest construction rate at 16.1% of Korean hospitals. Higher rates of construction of IT-based medication error prevention systems resulted in greater safety and a more positive error management climate prevailed. Conclusion: The supportive strategies for improving perception for use of IT-based systems would add to system construction, and positive error management climate would be more easily promoted.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권2호
• /
• pp.122-127
• /
• 2017

OSI 네트워크 모델의 데이터 링크 계층에서는 노드와 노드 사이에 신뢰성 있는 통신을 목표로 하며, 오류 발생이 잦은 무선 센서 네트워크 환경에서는 FEC(forward error correction) 기법을 주로 사용한다. FEC 기법은 패리티의 길이에 따라 오류 정정률을 설정할 수 있는데 오류 정정률을 높게 설정할수록, 에너지 소모가 크다는 한계가 존재한다. 한편 태양 에너지 기반 센서 네트워크에서는 주기적으로 에너지가 충전되며, 이로 인해 노드가 기본적으로 동작하는 데 필요한 에너지보다 더 많은 양의 에너지가 존재할 가능성이 있다. 따라서 본 논문에서는 수집되는 에너지 중 여분의 에너지를 사용해 데이터 손실률을 감소시키는 에너지 적응형 Reed-Solomon 기법을 제안한다. 노드의 에너지 상태에 따라 FEC의 패리티 길이를 다르게 설정하여, 에너지와 데이터 손실률의 trade-off(이율배반) 관계를 이용하는 기법을 제안하고 시뮬레이션을 통해 성능을 검증한다.

• 한국위성정보통신학회논문지
• /
• 제10권2호
• /
• pp.46-53
• /
• 2015

Visible Light Communication (VLC)은 Light Emitting Diode (LED)를 사용하여 조명의 역할과 통신의 기능을 동시에 구현할 수 있는 효과적인 방법이다. VLC는 통신 가능 영역인 Field Of View (FOV)를 가져 높은 보안성을 가지고, 가시광을 이용해 고속의 데이터 전송이 가능하다. VLC 시스템에서 RGB 채널에 데이터를 분할하여 전송하는 방법은, RGB 채널에 동일한 데이터를 전송하는 방법에 비해 빠른 데이터 전송 속도를 가지고 있으나, 가시광의 산란 및 반사로 인한 데이터의 burst 에러가 발생할 시 복원이 불가능하여 BER 성능의 열화가 발생한다는 단점이 존재한다. 이러한 문제를 해결하기 위해 VLC에서 빠른 데이터 전송률을 가지면서 BER 성능 향상을 만족하는 2-step 인터리빙 기법을 제안한다. 제안 시스템의 Cyclic 인터리빙과 convolutional 인터리빙을 통해 RGB 채널의 성능 평준화 및 데이터 에러율의 감소로 전체 시스템의 BER 성능이 향상됨을 확인 할 수 있다.

• ETRI Journal
• /
• 제45권3호
• /
• pp.404-417
• /
• 2023

This paper proposed a novel method for constructing quasi-cyclic low-density parity-check (QC-LDPC) codes of medium to high code rates that can be applied in cloud data storage systems, requiring better error correction capabilities. The novelty of this method lies in the construction of sparse base matrices, using a girth greater than 4 that can then be expanded with a lift factor to produce high code rate QC-LDPC codes. Investigations revealed that the proposed large-sized QC-LDPC codes with high code rates displayed low encoding complexities and provided a low bit error rate (BER) of 10^-10 at 3.5 dB E_b/N₀ than conventional LDPC codes, which showed a BER of 10^-7 at 3 dB E_b/N₀. Subsequently, implementation of the proposed QC-LDPC code in a softwaredefined radio, using the NI USRP 2920 hardware platform, was conducted. As a result, a BER of 10^-6 at 4.2 dB E_b/N₀ was achieved. Then, the performance of the proposed codes based on their encoding-decoding speeds and storage overhead was investigated when applied to a cloud data storage (GCP). Our results revealed that the proposed codes required much less time for encoding and decoding (of data files having a 10 MB size) and produced less storage overhead than the conventional LDPC and Reed-Solomon codes.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.119-125
• /
• 1999

The distribution of fatigue crack growth rate is subjected to the measuring interval and calculated method of growth rate. In this paper, in order to establish the method of determining the distribution of fatigue crack growth rate, which ignores those influences, a series of fatigue crack growth experiments and measuring intervals of crack length calculated reasonable are presented. The main conclusions obtained are summarized as follows: 1) As a result of the ΔP constant test and ΔK constant test, it is thought that an approximate measuring interval of 0.3~0.7mm is reasonable, which allows for few errors and is little subjected to the calculated method of crack growth rate. 2) After generally comparing the error estimation by using the experimental data of CCT specimen with the error rating of the CT specimens, it is possible that the fatigue test has few errors within the measuring interval, ξ(Δa/W)=0.0067~0.017, regardless of the dimension of specimen geometry.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1076-1079
• /
• 2005

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time in. Today any data storage system can not satisfy these conditions, but holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System architecture without mechanical actuating part is possible, so fast data transfer rate and high storage capacity about 1Tb/cm3 can be realized. In this paper, to correct errors of binary data stored in holographic digital data storage system, find cluster centers using clustering algorithm and reduce intensities of pixels around centers. We archive the procedure by two algorithms of C-mean and subtractive clustering, and compare the results of the two algorithms. By using proper clustering algorithm, the intensity profile of data page will be uniform and the better data storage system can be realized.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.83-87
• /
• 2005

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time in. Today any data storage system can not satisfy these conditions, but holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System architecture without mechanical actuating pare is possible, so fast data transfer rate and high storage capacity about 1Tb/cm3 can be realized. In this paper, to correct errors of binary data stored in holographic digital data storage system, find cluster centers using clustering algorithm and reduce intensities of pixels around centers. We archive the procedure by two algorithms of C-mean and subtractive clustering, and compare the results of the two algorithms. By using proper clustering algorithm, the intensity profile of data page will be uniform and the better data storage system can be realized.

• 한국통신학회논문지
• /
• 제36권8A호
• /
• pp.683-690
• /
• 2011

센서 태그의 데이터는 태그 정보와 센싱 정보를 동시에 가지며 미들웨어 또는 상위 레벨에서의 필터링 및 가공이 필요하다는 특정을 가지고 있다. 기존의 필터링 알고리즘에서는 태그데이터와 센서 데이터를 각각 필터링하는 알고리즘이 주로 제안되었다. 그러나 센서 태그의 사용 요구는 점차 증가하고 있으며, 사용요구에 적합한 필터링을 위해서는 센싱 데이터와 RFID 데이터를 통합 처리할 수 있는 새로운 필터링 알고리즘이 필요하다. 본 논문에서 제안하는 필터링 알고리즘에서는 각 태그의 시간 축에 대한 필터링만을 고려하는 것이 아니라 공간적으로 근접한 태그의 데이터도 함께 고려하여 필터링하여 오류 및 이벤트 검출의 정확성을 향상시키고 데이터의 대표값 저장으로 데이터 저장에 필요한 비용을 감소시킬 수 있다.