• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.296-301
• /
• 2004

This paper addresses an analysis for a railway data transmission protocol-Ethernet based data transmission between the CTC(Centralized Traffic Control System) and the SCADA(Supervisory Control and Data Acquisition) system. Fame error rates of the data transmissions are calculated and compared for the two cases that the CTC/SCADA has an extra data transmission error control(CRCI6) besides the inherent error control of the Ethernet(CRC32), and that the CTC/SCADA has no extra data transmission error control. With simulation results it has been verified that the extra data transmission error control(CRC16) contributes to lowering the frame error rate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.223-224
• /
• 2021

Recently, the demand for high fluidity concrete has been increased due to skyscrapers. However, it has its own limits. First of all, high fluidity concrete has large variation and through trial & error it costs lots of money and time. Neural network model has repetitive learning process which can solve the problem while training the data. Therefore, the purpose of this study is to predict optimum mix design of 40MPa, 60MPa high fluidity concrete by using neural network model and verifying compressive strength by applying real data. As a result, comparing collective data and predicted compressive strength data using MATLAB, 40MPa mix design error rate was 1.2%~1.6% and 60MPa mix design error rate was 2%~3%. Overall 40MPa mix design error rate was less than 60MPa mix design error rate.

• 인간식물환경학회지
• /
• 제22권2호
• /
• pp.219-229
• /
• 2019

This study was carried out to verify the accuracy of fitness tracking devices in monitoring heart rate and energy consumption and to contribute to the development of a forest exercise program that can recommend the intensity and amount of forest exercises based on personal health-related data and provide monitoring and feedback on forest exercises. Among several commercially available wearable devices, Fitbit was selected for the research, as it provides Open API and data collected by Fitbit can be utilized by third parties to develop programs. Fitbit provides users with various information collected during forest exercises including exercise time and distance, heart rate, energy consumption, as well as the altitude and slope of forests collected by GPS. However, in order to verify the usability of the heart rate and energy consumption data collected by Fitbit in forest, the accuracy of heart rate and energy consumption were verified by comparing the data collected by Fitbit and reference. In this study, 13 middle-aged women were participated, and it was found that the heart rate measured by Fitbit showed a very low error rate and high correlation with that measured by the reference. The energy consumption measured by Fitbit was not significantly different from that measured in the reference, but the error rate was slightly higher. However, there was high correlation between the results measured by Fibit and the reference, therefore, it can be concluded that Fitbit can be utilized in developing actual forest exercise programs.

• Journal of the Korean Data and Information Science Society
• /
• 제25권5호
• /
• pp.971-986
• /
• 2014

동시에 여러 개의 가설검정 수행시 귀무가설이 참일 경우 귀무가설을 기각할 확률이 커지는 문제가 발생한다. 이러한 다중검정 문제 해결을 위해 여러 연구에서는 가설검정시 필요한 집단별 오류율(FWER; family-wise error rate), 위발견율 (FDR; false discovery rate) 또는 위비발견율 (FNR; false nondiscovery rate) 과 통계량을 고려하여 검정력을 높이고자 하였다. 본 연구에서는 T 통계량, 수정된 T 통계량, 그리고 LPE (local pooled error) 통계량 기반 P값을 이용한 Bonferroni (1960) 방법, Holm (1979) 방법, Benjamini와 Hochberg (1995) 방법과 Benjamini와 Yekutieli (2001) 방법 그리고 Z 통계량 기반 Sun과 Cai (2007) 방법을 고찰하고 모의실험을 통해 다중검정 능력을 비교하였다. 또한 실제 데이터로 애기장대 유전자 발현 데이터에 대해 여러 가지 다중검정법을 통해 유의한 유전자들을 선별하였다.

• 한국안전학회지
• /
• 제39권2호
• /
• pp.65-74
• /
• 2024

We analyzed the relationship between the normal measurement of the seismic accelerometer (SA) and the error rate of the output voltage linear ratio to propose an evaluation method to determine whether the SA in use is measuring normally. Utilizing a test bed, the regular operation of SA in use was evaluated using acceleration data measured through impact tests since there are no regulations regarding performance testing of SA in use. For the used SA, the error rate of the output voltage linear ratio, which is a major performance criterion, was evaluated. We analyzed common characteristics of the SA that satisfied the impact test and the performance criteria of the output voltage linear ratio error rate. The results indicated that we must consider the decreasing trend and convergence of the error rate as the measurement angle increases, ensuring that the average value of the output voltage linear ratio error rate is within 1%.

• 정보저장시스템학회논문집
• /
• 제6권1호
• /
• pp.31-36
• /
• 2010

Data storage related with writing and retrieving requires high storage capacity, fast transfer rate and less access time. Today any data storage system cannot satisfy these conditions, however holographic data storage system can perform faster data transfer rate because it is a page oriented memory system using volume hologram in writing and retrieving data. System can be constructed without mechanical actuating part so fast data transfer rate and high storage capacity about 1Tb/cm3 can be realized. In this research, to correct errors of binary data stored in holographic data storage system, a new method for reduction errors is suggested. First, find cluster centers using subtractive clustering algorithm then reduce intensities of pixels around cluster centers. By using this error reduction method following results are obtained ; the effect of Inter Pixel Interference noise in the holographic data storage system is decreased and the intensity profile of data page becomes uniform therefore the better data storage system can be constructed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.275-278
• /
• 2003

Terrestrial DMB(Digital Multimedia Broadcasting) system is the standard that offers multimedia broadcasting services at mobile environment and is based on Eureka-147 DAB(Digital Audio Broadcasting) for transmission method. Also DMB provides the error protection method of convolution coding. In this paper, we study on the effective error resilience coding of MPEG-4 video stream over DMB system. To accomplish error resilience, we first partition one data into several data using the data partitioning, and we control the coding rate of the convolution coding according to the importance of the partitioned data. In this algorithm, we suggest and analyze the efficient rate control algorithm considering convolution code rate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.279-282
• /
• 2003

Terrestrial DMB(Digital Multimedia Broadcasting) system is the standard that offers multimedia broadcasting services at mobile environment and is based on Eureka-147 DAB(Digital Audio Broadcasting) for transmission method. Also DMB provides the error protection method of convolution coding. In this paper, we study on the effective error resilience coding of MPEG-4 video stream over DMB system. To accomplish error resilience, we first partition one data into several data using the data partitioning, and we control the coding rate of the convolution coding according to the importance of the partitioned data. In this algorithm, we suggest and analyze the efficient rate control algorithm considering convolution code rate.

• Corrosion Science and Technology
• /
• 제11권4호
• /
• pp.129-134
• /
• 2012

UT(Ultrasonic Test), one of the non-destructive tests, is the most common thickness measurement method for evaluating the wear rate in NPPs(Nuclear Power Plants). UT is used widely because it is easy and safe for use. However some amount of error inevitably occurs in attempting to measure the thickness. The error, that could make the thickness data thicker or thinner, may affect estimation of wear rate in pipes. NPPs are composed of a lot of pipes and components. Some of them are tested to check the current status during RFO(Re-Fueling Outage). Reliability analysis of UT is essential for evaluating pipe wear rate and establishing the long-term management plan in NPPs. This paper reviewed the cause of error occurrence and presented the UT data reliability analysis method. Also, this paper shows the application result of reliability analysis to the UT data acquired in NPPs.

• 제어로봇시스템학회논문지
• /
• 제12권7호
• /
• pp.631-636
• /
• 2006

In this paper, an algorithm of time series function forecasting using GMDH(group method of data handling) algorithm that gives more weight to the recent data is proposed. Traditional methods of GMDH forecasting gives same weights to the old and recent data, but by the point of view that the recent data is more important than the old data to forecast the future, an algorithm that makes the recent data contribute more to training is proposed for more accurate forecasting. The average error rate of electric power demand forecasting by the traditional GMDH algorithm which does not use data weighting algorithm is 0.9862 %, but as the result of applying the data weighting GMDH algorithm proposed in this paper to electric power forecasting demand the average error rate by the algorithm which uses data weighting algorithm and chooses the best data weighting rate is 0.688 %. Accordingly in forecasting the electric power demand by GMDH the proposed method can acquire the reduced error rate of 30.2 % compared to the traditional method.