• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.186-189
• /
• 2019

NFSC202에는 화재로 인하여 하나의 층의 확성기 또는 배선이 단락되어도 다른 층의 화재 통보에 지장이 없도록 규정하고 있다. 이를 위해 Analog digital converter (ADC), High pass filter (HPF), Low pass filter (LPF)로 구성된 초음파송수신장치를 제작하였으며 시험을 통해 해당 장치가 증폭기출력, 확성기용량, 음량레벨의 변동에 관계없이 동작함을 확인하였다. 또한 기준주파수 110 kHz(-12 dB)를 송신하는 경우 단락시 -12dB~-18 dB, 정상인 경우-24 dB~-66 dB, 단선시에는 -66 dB을 초과하는 경우와 수신데이터가 없는 경우의 설정된 값을 만족하였다. 따라서 NFSC202 규정에 적정한 시스템임을 확인하였으며 본 시스템을 적용할 경우 점검기준이나 시험기준이 수정 또는 개정되어야 한다.

• Journal of Periodontal and Implant Science
• /
• 제25권1호
• /
• pp.67-75
• /
• 1995

The progress of periodontal disease and the wound healing process after treatment result in alveolar bone bone change. So, detection of it is very important in the diagnosis and the radiograph of periodontal disease. Various effects have been made to assess the subtle alveolar bone change and digital subtraction radiography (DSR) has been reported to be the best method in evaluating it qualitatively and quantitatively. The present study was performed to estimate the detectable alveolar bone change qualitatively with digital subtraction radiography. For the in vitro study, 10 intraoral standard radiographs were taken from porcine dry mandible which a rectangular cortical bone chip of 0.1mm to 1.0mm thickness with 0.1mm increment was attached on the buccal surface. The radiographs without and with bone plates were reviewed at the same time by 10 observers and requested to detect the presence of cortical bone plates. Digital Subtraction radiograph was reviewed subsequently by using the DSR system(digital converter-256 grey-levels,DT 2851,Data Translation Co., U.S.A;IBM 386 ; CCD camera, FOTOVIX, Tamrom Co., Japan). The detectable thickness of cortical bone plate was O.4mm on the intraoral radiograph and 0.2mm on the subtaction images. For the human study, radiographs were taken from patients by using intraoral film holding device and aluminum reference wedge before and 3 month after bone graft and 1 week after osteoplasty. The grey level change was estimated in the subtraction images and calculated to aluminum equivalent thickness. The grey level of the grafted site was higher that that of healthy controls. Average grey levels of change on healthy controls were O.48mm aluminum equivalent. However, the amount of changes in grafted sites were 1.87mm aluminum thickness equivalent and in the site of osteoplasty were -1.49mm aluminum thickness equivalent. In conclusion, digital subtraction radiography was more effective in detecting as subtle change of alveolar bone than intraoral standard radiography. With the aid of quantitative analysis of digital subtraction radiography, alveolar bone resorption of apposition can be estimated during diagnosis and treatment of periodontally diseased patients.

• 한국전자파학회논문지
• /
• 제19권11호
• /
• pp.1272-1280
• /
• 2008

본 논문에서는 빠른 천이 시간 및 고해상도 특성을 동시에 만족하기 위해 주로 사용되는 DDS Driven PLL 구조 주파수 합성기의 위상 잡음 분석을 위한 모델링 방안을 제안하였다. 기준 주파수 발진기(reference oscillator) 및 전압 제어 발진기(VCO: Voltage Controlled Oscillator)는 Leeson 모델을 적용하여 측정 데이터를 근사하는 방법을 사용하였고, DDS 칩의 위상 잡음원은 DAC(Digital to Analog Converter) 동작에 근사하여 모델링하였다. PLL의 위상 잡음은 디지털 분주기의 위상 잡음원으로 근사하여 모델링하였으며, 특히 저역 통과 필터(low pass filter)의 각 소자들의 위상 잡음은 전압 제어 발진기의 위상 잡음과 함께 고려하는 방법을 제안하였다. 모델링된 각 잡음 원들을 선형 시스템 영역에서 중첩의 원리를 이용하여 분석함으로써 주파수 합성기 출력의 위상잡음 분포를 예측하였고, 그 결과를 제작된 주파수 합성기의 측정 결과와 비교 평가하였다.

• 전자공학회논문지D
• /
• 제36D2호
• /
• pp.81-89
• /
• 1999

다양한 파장변화 기술중에서 레이져 다이오드의 발전상태에서 교차이득변도(Cross-Gain Modulation)을 이용한 파장변환은 고속의 신호를 매우 간단하고 효율적으로 처리할 수 있다. 본 논문에서는 SSGDBR (Superstructure Grating Distributed Bragg Reflector) 레이저 다이오드의 파장변환기로서 특성을 분석하고 광통신 네트웍 모델링을 위한 CAD 도구로서 개선된 시영역 대신호 동적모델(Time-Domain Large-Signal Dynamic Model)의 유용성을 제시하였다. 이 모델을 l용하여 이런 구조의 파장변환 소자는 10Gbps이상 고속데이터를 처리할 수 있고 광대역 파장변환이 가능하다는 것을 확인하였다. 입력 광신호의 세기와 주입되는 전류가 파장변환된 신호의 소광비 등에 미치는 영향 및 Eye Diagram 등을 살펴 보았으며, 기존에 발표된 실험결과들과 매우 유사한 경향을 보임을 관측하였다.

• 센서학회지
• /
• 제13권5호
• /
• pp.383-391
• /
• 2004

In this study, we implemented the pulse transit time (PTT) system to examine usefulness of the monitoring method of distensibility and elasticity using photoplethysmography sensor in vivo. PTT is defined as the time interval between the peak of QRS complex in ECG signal and the maximum slope point of photoplethysmography. these two signals were converted to digital data by means of AID converter, then PTT was evaluated by heartbeat using PC. Results of analysis were displayed as a graph using spline interpolation method. The variance of PTT was measured repetitiously to verify efficiency of PTT system in resting state and hyperemic state. Repeated measurement of PTT was not same value but showed that coefficients of correlation were related with each other as 0.8302 (P<0.01) in resting state. And also repeated measurement of PTT showed significant correlation as 0.868 (P<0.01) in the hyperemic state. These result showed that PTT is reflect on transient pressure variance in the artery and is very useful method for the evaluation of prognosis of the hypertension and arteriosclerosis.

• 대한의용생체공학회:의공학회지
• /
• 제28권1호
• /
• pp.84-94
• /
• 2007

In order to collect information on local distribution of conductivity and permittivity underneath a scan probe, we developed a multi-frequency trans-admittance scanner (TAS). Applying a sinusoidal voltage with variable frequency on a chosen distal part of a human body, we measure exit currents from 320 grounded electrodes placed on a chosen surface of the subject. The electrodes are packaged inside a small and light scan probe. The system includes one voltage source and 17 digital ammeters. Front-end of each ammeter is a current-to-voltage converter with virtual grounding of a chosen electrode. The rest of the ammeter is a voltmeter performing digital phase-sensitive demodulation. Using resistor loads, we calibrate the system including the scan probe to compensate frequency-dependent variability of current measurements and also inter-channel variability among multiple. We found that SNR of each ammeter is about 85dB and the minimal measurable current is 5nA. Using saline phantoms with objects made from TX-151, we verified the performance of the lesion estimation algorithm. The error rate of the depth estimation was about 19.7%. For the size estimate, the error rate was about 15.3%. The results suggest improvement in lesion estimation algorithm based on multi-frequency trans-admittance data.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.148-156
• /
• 2007

본 논문은 원거리 및 직선구간에 동작되어지는 Stocker 시스템에 대해 설명하고 있다. 파티클 발생을 줄이기 위해 Stocker의 전원은 비접촉 전원장치를 사용한다. 기존 비접촉 전원장치보다 회로구성과 토폴로지를 간략화 하였다. 이를 바탕으로 시제품을 제작하여 상용화에 가능함을 보이고자 한다. 비접촉 전원장치 전체 제어 시스템의 구조는 1차측 전원공급장치와 2차측 전원공급장치간 상호 정보를 광모뎀 통신과 TMS320F243을 사용한 구조이며, 비접촉 전원장치와 출력제어를 위해 주파수 제어를 사용하였다. 본 논문에서는 광모뎀 통신을 사용함으로써 크레인의 이동부(2차측 전원공급장치)와 고정부(1차측 전원공급장치)간 1:1통신으로 제어되는 상용화 Stocker 시스템에 적용하였으며, 향후, Stocker 시스템의 멀티 Crane의 동작을 위해 비접촉 전원장치의 고정부와 이동부간 1:다수가 제어 가능하게 하는 연구가 이루어져야 할 것으로 생각된다.

• 정보처리학회논문지B
• /
• 제9B권4호
• /
• pp.471-480
• /
• 2002

본 논문에서는 블록화된 영상의 관심영역 가중치 비교 알고리즘과 형상특징 가중치 비교 알고리즘을 결합하여 지폐를 실시간으로 분류하는 시스템을 하드웨어로 구현하였다. 구현된 시스템은 영상획득부, 전처리 및 영상처리부로 구성되어 있다. 영상획득부는 CIS(contact image sensor)에 의해 영상이 얻어지고, A/D 변환기와 PLD에서 전처리를 한다. 영상처리부는 전처리된 영상을 제안된 알고리즘에 의해 DSP에서 수행한다. 제안한 방법은 시뮬레이션을 통해 질의영상과 비교영상간의 식별율을 높일 수 있고 오염되거나 회전, 이동된 지폐에서도 향상된 성능을 가진다. 그리고 제안 방법은 영상의 블록화 효과에 따른 계산량의 감소와 병렬처리를 할 수 있는 시스템으로 구성할 수 있어서 검색율을 높이거나 검색시간을 줄일 수 있는 장점이 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권2호
• /
• pp.68-79
• /
• 2003

We estimated harmonics on power system of AC railway based on quantitatively measured harmonics and investigated the need of facilities for harmonics reduction. In order to analysis harmonics which inflow into power system due to increase in collector voltages and harmonic currents generated from the train when the railway is in operation, the railway system Is sectioned into power supply, railway line, AT, sectioning Post and subsectioning post. For analysis of extension of currents resulting from the railway loads, PWM converter, VVVF inverter and the feeder system are modeled based on the dynamic node technique(DNT). In order to test the usefulness of the DNT for analysis of harmonic effects, the measured harmonic currents and harmonic magnification ratios at the S/K substation are compared with simulation results using DNT modelling, which include the results for two cases with and without filters for suppression of harmonic currents. When 8 cars(4M4T) are in operation, the total sum of harmonic currents resulting from the train at M and T phases, which inflow into the substation along with the railway line, is calculated. Using the harmonics analysis program for railway feeder system with these data, the total harmonic distortion factor(710) at the outgoing point of KEPCO substation is computed. The calculation shows that when the maximum THD at the receiving point of H/K substation was 0.0443% which is much lower than 1.5% which is the allowable value of KEPCO at 154kV as well as IEEE-519 above 132kV This result indicates that any measure for harmonics reduction in Incheon International Airport Railway is not needed.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.81-86
• /
• 2016

Background: For positron emission tomography (PET) application, cadmium zinc telluride (CZT) has been investigated by several institutes to replace detectors from a conventional system using photomultipliers or Silicon-photomultipliers (SiPMs). The spatial and energy resolution in using CZT can be superior to current scintillator-based state-of-the-art PET detectors. CZT has been under development for several years at the Korea Atomic Energy Research Institute (KAERI) to provide a high performance gamma ray detection, which needs a single crystallinity, a good uniformity, a high stopping power, and a wide band gap. Materials and Methods: Before applying our own grown CZT detectors in the prototype PET system, we investigated preliminary research with a developed discrete type data acquisition (DAQ) system for coincident events at 128 anode pixels and two common cathodes of two CZT detectors from Redlen. Each detector has a $19.4{\times}19.4{\times}6mm^3$ volume size with a 2.2 mm anode pixel pitch. Discrete amplifiers consist of a preamplifier with a gain of $8mV{\cdot}fC^{-1}$ and noise of 55 equivalent noise charge (ENC), a $CR-RC^4$ shaping amplifier with a $5{\mu}s$ peak time, and an analog-to-digital converter (ADC) driver. The DAQ system has 65 mega-sample per second flash ADC, a self and external trigger, and a USB 3.0 interface. Results and Discussion: Characteristics such as the current-to-voltage curve, energy resolution, and electron mobility life-time products for CZT detectors are investigated. In addition, preliminary results of gamma ray imaging using 511 keV of a $^{22}Na$ gamma ray source were obtained. Conclusion: In this study, the DAQ system with a CZT radiation sensor was successfully developed and a PET image was acquired by two sets of the developed DAQ system.