• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1022-1027
• /
• 2004

In this paper, an embedded foot pressure measurement system is proposed to measure foot pressure based on the embedded Linux system. To measure foot pressure data and to evaluate foot pressure distribution for the different insoles, FSR sensor, A/D converter, iPAQ PDA, and a time division measurement method are employed in the system. Utilizing this system, the foot pressure analysis has been performed for the different four shoes. The number of foot pressure/voltage conversion circuits are drastically decreased by the proposed time division measurement method from 406 to 14. The experimental results for the sandal, slipper, oxford shoes and sneakers demonstrate that the proposed system successfully performs the foot pressure measurement.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1409-1412
• /
• 2005

Therefore this study focused on developing real-time system, which makes it possible for nurses to check the residual quantity and changing time of Ringer's solution in nurses' room. Load Cell is utilized as a sensor to check the residual quantity of Ringer's solution. This Load Cell detects the physical changes of Ringer's solution and transfers electronic signal to the amplifier. Amplified analog signal is converted into digital signal by A/D converter. Developed Embedded system, which computes these data with microprocess(8052) then makes it possible to monitor the residual quantity of Ringer's solution real-time on a server computer. A Checking system on Residual Quantity of Ringer's Solution Using Load cell cut costs using a simple design for a circuit

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.133-139
• /
• 2002

In precision instrumentation system, an A/D conversion of signal conditioning has been always suffered from some problems ; offset and drift voltage with environmental situation. This paper suggests a method of reducing the offset voltage and the drift error from the A/D conversion hardware using analog signal switching technique with specific operational amplifier circuits. Also, we have designed a hardware active filter and a software digital filter with Auto Zero Tracking algorithm for better dignal process of the our proposed weighing system. Software technique was performed to obtain the stable data from A/D converter. As a result of our experimental works, the proposed system is expected to be used in the industrial field where a high precision measurement is required.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.121-127
• /
• 2001

Actual system apparatuses are necessary in order to verify the efficiency and stability of photovoltaic(PV) generation systems considering the size of solar panel, the sort of converter type, and the load conditions and so on. Moreover, it is hardly possible to compare a certain MPPT control scheme with others under the exactly same weather and load conditions as well. For the purpose of solving above mentioned difficulties in a laboratory basis, a transient simulation of PV generation system using real field weather conditions is indispensable. A straightforward simulation scheme with cost effective hardware structures under real weather conditions is proposed in this paper using EMTDC type of transient analysis simulators. Firstly, a solar cell has been modeled with VI characteristic equations, and then the real field data of weather conditions are interfaced to the EMTDC through Fortran program interface method. As a result, the stability and the efficiency analysis of PV generation systems according to various hardware structures and MPPT controls are easily possible under the exactly same weather conditions.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.459-464
• /
• 2009

This paper presents a production information monitoring system as an infrastructure of CIM system in footwear industry. The system is composed of hardware devices of terminal, communication converter, line controller and software for manufacturing processes. A terminal like a scanner is used for shop floor data input and a line controller is used to link between terminal and server. LAN and RS485 are used for connecting hardware components and deliver their information mutually. In the system, real time production information is acquired from information resources such as group of uppers and soles. The collected production information is delivered to a line controller and analyzed. Server receives information from line controller and machines for production management. Production planning information that is machined in the server is delivered to the shop floor and used for the production management of work in process, and used for improvement of productivity in a footwear production company. The implementation of the developed system shows the effectiveness of the system.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.481-483
• /
• 1989

This paper is concentrated on the recognition of Korean Digits. The speech signals of each of digits are fed into computer through the 18 bandpass filters, AD converter. Spectrum input data are analyzed and used. BASIC program language is used for recognition performance and the result of recognition is outputed to computer screen and printer. In this paper, the strength and weakness of filter-bank analysis method is described and the technique of real-time recognition is argued. In this experiment, Ratio of recognition for speaker dependent recognition was about 97% and recognition time was also satisfied. Therefore, A way of speaker independent recognition will be presented and using for special communication in the future.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.405-407
• /
• 2009

SVM(Support Vector Machine) is a classification method which is recently watched in mechanical learning system. Vapnik, Osuna, Platt etc. had suggested methodology in order to solve needed QP(Quadratic Programming) to realize SVM so that have extended application field. SVM find hyperplane which classify into 2 class by converting from input space converter vector to characteristic space vector using Kernel Function. This is very systematic and theoretical more than neural network which is experiential study method. Although SVM has superior generalization characteristic, it depends on Kernel Function. There are three category in the Kernel Function as Polynomial Kernel, RBF(Radial Basis Function) Kernel, Sigmoid Kernel. This paper has analyzed performance of SVM against kernel using virtual data.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.449-450
• /
• 2008

In this paper, we present the design of a system on a chip(SoC) based on Powerline Communication for Power-IT. The SoC deals with power information obtained from analog to digital converter and transmits this data via powerline. We integrate main processor, ADC and PLC function into a chip. Also a FPGA-based emulation system is introduced to evaluate a proposed SoC architecture.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.317-321
• /
• 1991

In recent years, the discrete-data and digital control systems have gained importance in all industies due in part to the advances made in microcomputers, as well as the advantages found in working with digital signals. So, the developments of the computer aided design packages to analysis, control law design and digital implementation of control systems are increasingly needed and those substantial technological improvements are now expected. In the paper, a real time control program package(RTCPP) for the implementation of digital control is developed by using C language. The digital controls for the feedfoward and feedback controllers such as PI(propotional and Integration) type, regulator and servo types can be implemented by an IBM PC compatible computer with some interface modules of A-D/D-A converter and RS-232C. The effectiveness of RTCPP is illustrated by the application controls for motor and magnetic levitation systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.541-546
• /
• 1989

In case there are many points to be measured in the field, conventional measuring system requires a lot of manpower and is liable to miss applying the timely countermeasure because processing and analyzing the data obtained also takes much time. Therefore the purpose of this paper is focused on removing the above defects by introducing automatic multi-point measuring system by use of IBM-PC or the compatibles easily at hand nowadays. Principal components of the system is composed of control box, A/D converter. 32 channel 4 wire switch boxes and strain amplifier. An application software was developed for multi point measurement system in order to efficiently evaluate the stability of the structures such as retaining walls.