• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.89-96
• /
• 2015

The various services applied internet have been provided by the rapid development of wireless networks and providing multimedia contents are also increasing. It is caused a number of problems such as increasing of network traffic rapidly. P2P technique is gaining popularity for solving these problems. In particular, P2P technique in a wireless network environment has gained much popularity. Among them, MANET-based P2P techniques has been studied actively. It is not easy to be applied the existing technique as it is due to the dynamic topology and low bandwidth by moving nodes in MANET that is consisted of only mobile nodes. In this paper, we proposed sharing group construction technique for providing a stable connection between mobile nodes and reducing the load of network traffic and overhead of sharing group reconfiguration in order to improve data transmission performance between mobile nodes. The sharing group member nodes applied virtual sharing group generation technique with neighboring nodes of 1-hop distance in order to reduce traffic for file sharing. We performed comparative experiments with DHT technique to evaluate the performance of the proposed technique in this paper and the excellent performance is confirmed through experiments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.3
• /
• pp.352-362
• /
• 2005

Statement of problem. Accurate impression is essential to success of implant prostheses. But there have been few studies about the accuracy of fixture-level impression techniques in internal connection implant systems. Purpose. The purpose of this study was to compare the accuracy of two fixture-level impression techniques in two conditions (parallel and divergent) and to assess the effect of tightening sequences and forces on stresses generated on superstructures in internal connection implant system (Astra Tech). Material and methods. Two metal master frameworks made from two abutments (Cast-to Abutment ST) each and a corresponding, passively fitting, dental stone master cast with four fixture replicas (Fixture Replica ST) were fabricated. Ten dental stone casts for each impression techniques (direct unsplinted & splinted technique) were made with vinyl polysiloxane impressions from the master cast. Strain gauges for each framework were fixed midway between abutments to measure the degree of framework deformation on each stone cast. Pairs of strain gauges placed opposite each other constituted one channel (half Wheatstone bridge) to read deformation in four directions (superior, inferior, anterior, and posterior). Deformation data were analyzed using one-way ANOVA and the Tukey test at the .01 level of significance. And the effect of tightening sequences (right-to-left and left-to-right) and forces (10 Ncm and 20 Ncm) were assessed with ten stone casts made from parallel condition by the splinted technique. Deformation data were analyzed using paired t-test at the .01 level of significance. Conclusions. Within the limitations of this study, the following conclusions could be drawn. 1. Frameworks bent toward the inferior side on all casts made by both direct unsplinted and splinted impression techniques in both parallel and divergent conditions. 2. There was no statistically significant difference of accuracy between the direct unsplinted and splinted impression techniques in both parallel and divergent conditions (P>.01). 3. There was no statistically significant difference of stress according to screw tightening sequences in casts made by the splinted impression technique in parallel condition (P>.01). 4. Greater tightening force resulted in greater stress in casts made by the splinted impression technique in parallel condition (P<.01).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.9-20
• /
• 1999

A method is proposed to estimate the joint damages of a steel structure from modal data using the neural networks technique. The beam-to-column connection in a steel frame structure is represented by a zero-length rotational spring of the end of the beam element, and the connection fixity factor is defined based on the rotational stiffness so that the factor may be in the range 0~1.0. Then, the severity of joint damage is defined as the reduction ratio of the connection fixity factor. Several advanced techniques are employed to develop the robust damage identification technique using neural networks. The concept of the substructural indentification is used for the localized damage assessment in the large structure. The noise-injection learning algorithm is used to reduce the effects of the noise in the modal data. The data perturbation scheme is also employed to assess the confidence in the estimated damages based on a few sets of actual measurement data. The feasibility of the proposed method is examined through a numerical simulation study on a 2-bay 10-story structure and an experimental study on a 2-story structure. It has been found that the joint damages can be reasonably estimated even for the case where the measured modal vectors are limited to a localized substructure and the data are severely corrupted with noise.

• The KIPS Transactions:PartC
• /
• v.15C no.2
• /
• pp.119-124
• /
• 2008

The LEACH is a study method of a clustering base that was representative in many routing techniques that was suggested in sensor network environment. This is suggested technique to manage the sensor network group which consisted of many sensors in efficiency. However, it does not consider energy remaining quantity of the cluster header to manage cluster group, the problem where the cluster group is able to destroyed on the middle which transmits data. We are going to propose to solve such a problem by this paper for new clustering technique to accomplish management for a cluster group. It uses the technique which it proposes from the dissertation which it sees and are to the data transfer and the control also the connection directivity of the cluster group to improve also the lag time diminishes, test result it will lead and the possibility which it will know it was.

• Smart Structures and Systems
• /
• v.26 no.1
• /
• pp.103-115
• /
• 2020

The cold-formed steel storage racks are extensively employed in various industries applications such as storing products in reliable places and storehouses before distribution to the market. Racking systems lose their stability under lateral loads, such as seismic actions due to the slenderness of elements and low ductility. This justifies a need for more investigation on methods to improve their behavior and increase their capacity to survive medium to severe loads. A standardized connection could be obtained through investigation on the moment resistance, value of original rotational stiffness, ductility, and failure mode of the connection. A total of six monotonic tests were carried out to determine the behavior of the connection of straight 2.0 mm, and 2.6 mm thickness connects to 5 lug end connectors. Then, the obtained results are benched mark as the original data. Furthermore, an extreme learning machine (ELM) technique has been employed to verify and predict both moment and rotation results. Out of 4 connections, increase the ultimate moment resistance of connection by 13% and 18% for 2.0 mm and 2.6 mm upright connection, respectively.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.268-270
• /
• 2004

There are various researches on MPEG techniques. MPEG technique is used to digital TV(DTV) and internet image communication. Connection method between server and client is usually using wire. Applications may be expanded, if wireless technology is used between server and client system. In this paper, Bluetooth is used for connection method between server and client. Bluetooth offers fast and reliable transmissions of both voice and data over the globally available 2.4GHz ISM (Industrial, Scientific and Medical) band. One of the major application purposes of Bluetooth is the cable replacement for mobile and peripheral devices. Bluetooth has the advantage of small size, low power and low cost. It has the disadvantage of limited bandwidth and limited range. In order to transfer effectively image Information between server and client using Bluetooth, we apply MPEG-2 and MPEG-4 image compression techniques and the results are compared with each other.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.40-45
• /
• 2008

There exist many types of pipe and component fatigue through vibrations, thermal fatigues or shifting. In some cases of thermal stratification/thermal fatigue, pipes & components are receiving thermal stress by means of material expansion and shrinkage by continuous thermal repetitive variation. Small cracks initially occur on the inside surface by thermal stress. These cracks grow in depth the pipe wall and finally come to a rupture. Pipe parts of susceptibility to thermal stratification and thermal fatigue are now being examined by conventional UT(ultrasonic test) as volumetric examination. It is difficult to fully satisfy the code & standards requirements because 3" weldolet weldments of RCS 16" pipe to 3" branch connection lines have complex structural shape. To solve the problems of conventional UT examination, we made a realistic mock-up and UT calibration block. We performed a simulation of phased array UT utilizing CIVA as NDE(Non-Destructive Examination) simulation software. Also we designed phased array UT transducer and wedge, optimal frequency by using simulation data. We performed phased array UT experiment through mock-up including artificial flaws(notch). The phased array UT technique is finally developed to improve the reliability of ultrasonic test at RCS 16" pipe to 3" branch connection weld.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1015-1024
• /
• 2020

By nature, smart construction technology is a convergence technology, therefore aptly constructing and running an information system is needed in order to effectively develop and maintain it. Thus, in this study, an information system prototype was developed for the creation and linking of high precision digital maps at road construction sites for the effective performance of the development of the Information Collecting and Analyzing Techniques in the Construction Site (ICAT). For this, (1) defined input/output (I/O) data of each technical detail of ICAT, (2) analyzed the data flow, (3 ) proposed an information system prototype for high precision digital maps development and connection. Based on the information system prototype constructed in this study, it was inferred that each technique and its information for the Smart Construction Technique Development Business was in a consistent flow. Developed information system prototype would enable effective cooperation between subjects directly involved in the technique development, by defining I/O data in advance. Moreover, it would be of value to practitioners for refining the output data from each technique, thereby linking databases and forming Entity Relationship Diagram.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.69-75
• /
• 2021

Limitation of the TCP/IP network technology included in the vehicle communication is due to the frequent mobility of the vehicle, the increase in intermittent connection requirements, and the constant presence of the possibility of vehicle hacking. VNDN technology enables the transfer of the name you are looking for using textual information without the need for vehicle identifiers like IP/ID. In addition, intermittent connectivity communication is possible rather than end-to-end connection communication. The data itself is the subject of communication based on name-based forwarding using two types of packets: Interest packet and Data packet. One of the issues to be solved for the realization of infotainment services under the VNDN environment is the traffic explosion caused by data broadcasting. In this paper, we analyze and compare the existing technologies to reduce the data broadcast storm. Through this, we derive and analyze the requirements for presenting the best data mitigation technique for solving the data explosion phenomenon in the VNDN environment. We expect this paper can be utilized as prior knowledge in researching improved forwarding techniques to resolve the data broadcast explosion in connected vehicles over NDN.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1237-1252
• /
• 2010

This paper proposes an intelligent technique for data sharing and event transition among personal devices including smart phones, laptops, and desktops. We implemented the PES (Personal Event Service) system that proactively executes appropriate tasks across multiple devices without explicit user requests by sharing the data used by the user and recognizing user intention based on the observed actions of the user for specific devices. The client module of PES installed on each device monitors the user actions and recognizes the intention of the user. The server provides data sharing and maintenance for clients. The connection between client and server is established by Java RMI (Remote Method Invocation). A series of experiments were performed to evaluate user satisfaction and system accuracy, and the results showed that the PES system can proactively provide appropriate, personalized services with a high degree of satisfaction to the user in an effective and efficient manner.