• 제목/요약/키워드: Data centric

검색결과 462건 처리시간 0.029초

감시정찰 센서 네트워크에서 서비스 기반 정보수집을 위한 효율적인 클러스터링 및 데이터 전송 기법 (Efficient Clustering and Data Transmission for Service-Centric Data Gathering in Surveillance Sensor Networks)

  • 송운섭;정우성;서윤;고영배
    • 한국군사과학기술학회지
    • /
    • 제16권3호
    • /
    • pp.304-313
    • /
    • 2013
  • Wireless Sensor Networks, especially supporting for surveillance service, are one of the core properties of network-centric warfare(NCW) that is a key factor of victory in future battlefields. Such a tactical surveillance sensor network must be designed not just for energy efficiency but for real-time requirements of emergency data transmission towards a control center. This paper proposes efficient clustering-based methods for supporting mobile sinks so that the network lifetime can be extended while emergency data can be served as well. We analyze the performance of the proposed scheme and compare it with other existing schemes through simulation via Qualnet 5.0.

데이터 중심 초분산 자율 인프라 기술 (Data-Centric Hyper-distributed Autonomous Infrastructure Technologies)

  • 김선미;김상기;변성혁;정희영;강세훈;임종철;윤승현;신용윤
    • 전자통신동향분석
    • /
    • 제34권1호
    • /
    • pp.13-22
    • /
    • 2019
  • Various hyper-intelligent and ultra-realistic data-driven services are being increasingly developed with the goal of achieving a hyper-connected intelligent society. To sustain this trend, our research focuses on the integration and optimization of data-driven applications from several aspects such as delivery, storage, execution, and sharing of data and software, beyond the limitations of the existing network infrastructure. In this paper, we present important research issues of data-centric hyper-distributed autonomous infrastructure technologies.

센서네트워크에서의 프록시 트라젝토리 기반 데이터 저장 기법 (An Proxy Trajectory Based Storage in Sensor Networks)

  • 임화정;이헌길
    • 정보처리학회논문지C
    • /
    • 제15C권6호
    • /
    • pp.513-522
    • /
    • 2008
  • 센서네트워크에서 데이터를 효율적으로 전송하는 것은 매우 중요한 문제이다. 수집된 데이터를 외부의 저장소나 시스템에 저장하기보다는 센서네트워크 내에 있는 노드들에 직접 저장하는 데이터 중심 저장소 기법은 높은 접근성을 제공할 수 있다. 센서네트워크에서 사용되는 데이터 저장소 기법을 사용하면 데이터를 외부 저장소로 전송하기 위한 지연시간과 에너지 낭비없이 실시간으로 수집된 데이터에 접근할 수 있다는 것이다. 그러나 데이터를 저장하는 일부 노드에 질의가 집중될 경우 질의에 대한 응답시간이 길어질 수 있으며, 부하집중으로 노드의 에너지가 빠르게 고갈되어 네트워크 수명이 단축될 수 있다. 본 논문에서는 질의를 처리하는 저장소 노드에 발생하는 부하를 주위의 여러 노드들로 분산시켜 질의에 대한 응답지연시간을 줄이고, 사용자의 이동성을 지원하는 프록시개념의 프록시 트라젝토리를 형성하는 프록시 트라젝토리 저장기법(APT)기법을 제안한다. 시뮬레이션을 통하여 제안기법의 노드별 질의 응답시간의 단축과 응답 홉 수의 감소를 검증하였다.

데이터 중심 저장 기법을 위한 효율적인 센서 데이터 압축 기법 (Efficient Sensor Data Compression Algorithm for Data-Centric Storage)

  • 노규종;여명호;성동욱;복경수;신재룡;유재수
    • 한국콘텐츠학회논문지
    • /
    • 제10권11호
    • /
    • pp.58-67
    • /
    • 2010
  • 데이터 중심 저장 기법은 센서 네트워크에서 측정값을 효율적으로 저장하고 관리하기 위한 대표적인 연구 중 하나이다. 이 기법은 센서가 센싱한 데이터를 특정 센서 노드로 보내 저장한다. 하지만, 측정값을 네트워크 내부의 특정 노드로 전송하는 과정에서 많은 에너지를 소모하는 문제점을 가지고 있다. 본 논문에서는 데이터 중심 저장 기법에서 데이터의 전송 비용을 줄이기 위한 새로운 센서 데이터 압축 기법을 제안한다. 제안하는 기법은 측정값의 안전영역(Safe Region) 범위를 설정하고, 측정값이 안전영역을 벗어나는 경우만 데이터를 전송한다. 이를 통해 데이터의 전송을 줄이고 네트워크의 수명을 연장 시킨다. 성능평가 결과, 기존 기법에 비해 제안하는 기법의 에너지 소모가 60% 감소하였다.

센서 네트워크에서 저장 공간의 활용성과 에너지 효율성을 위한 시간 매개변수 기반의 데이타 중심 저장 기법 (A Time-Parameterized Data-Centric Storage Method for Storage Utilization and Energy Efficiency in Sensor Networks)

  • 박용훈;윤종현;서동민;김준;유재수
    • 한국정보과학회논문지:데이타베이스
    • /
    • 제36권2호
    • /
    • pp.99-111
    • /
    • 2009
  • 최근 무선 센서 네트워크 환경에서 감지되는 데이타를 네트워크상에 효과적으로 저장하고 처리하기 위한 다양한 기법들이 제안되었다. 데이타 중심 저장(Data-Centric Storage : DCS) 기법은 분할된 데이타 영역을 센서들에게 할당하고, 수집된 데이타를 해당 데이타 영역을 담당하는 센서에 저장하는 기법이다. 기존 연구된 DCS 기반 기법들은 데이타 전송을 위한 통신비용의 감소와 정합 질의(Exact Query) 및 영역 질의(Range Query)의 효과적인 처리를 위해 제안되었다. 하지만 방대한 데이타가 발생하는 데이타 영역을 담당하는 센서의 저장 부하 문제는 고려되지 않았다. 최근 이와 같은 저장 부하 문제를 해결하기 위해 K-D 트리를 기반으로 동적 분할 데이타 영역을 사용하는 KDDCS가 제안되었다. 하지만 KDDCS를 포함한 모든 기존 DCS 기반 기법들은 인기 있는(많은 질의 요청을 받는) 데이타 영역에 대한 질의 부하가 고려되지 않았기 때문에, 결과적으로 전체 센서 네트워크의 수명이 단축된다. 그래서 본 논문에서는 저장 부하뿐만 아니라 질의 부하도 효과적으로 해결할 수 있는 새로운 DCS 기반 기법인 TPDCS(Time parameterized DCS)를 제안한다. 제안하는 기법은 데이타 차원뿐만 아니라 시간 차원을 함께 고려하여 센서에 할당되는 데이타 영역을 분할한다. 제안하는 방법은 데이타 저장과 질의 처리 분산을 통해 전체 센서 네트워크의 수명을 크게 연장시킨다. 또한 본 논문에서는 대표적인 기존 DES기반 기범들과 다양한 성능 비교 평가를 통해 제안하는 기법의 우수성을 보인다.

전술데이터링크 처리기의 전송 속도 개선에 대한 연구 (A Study on the Improvement of Transmission Speed of Data Link Processor)

  • 이강
    • 한국전자통신학회논문지
    • /
    • 제14권6호
    • /
    • pp.1069-1076
    • /
    • 2019
  • 정보통신기술의 발달로 군의 무기체계가 네트워크로 연결되어 실시간으로 데이터를 주고받아 작전을 수행하는 네트워크 중심전으로 전장 환경이 크게 변하고 있는 추세이다. 네트워크 중심전의 핵심 시스템은 전술데이터 링크이며, 전술데이터링크 가입자는 유선, 무선, 위성 네트워크를 통해 실시간으로 전술정보를 주고받아 전장상황을 공유한다. 시간이 지날수록 전술데이터링크 시스템을 탑재한 군의 무기체계가 증가하고, 통신장비의 성능이 개선되는 상황에서 전술데이터링크를 통해 주고받는 데이터의 양도 증가할 수밖에 없다. 본 연구에서는 전술데이터링크의 데이터를 처리하는 데이터링크 처리기의 전술자료 송신 메커니즘을 개선하여 전술데이터링크 시스템의 전송속도 및 처리 용량을 향상시킬 수 있는 방법을 제안한다.

네트워크중심전(NCW)을 위한 UMPC 기반 데이터 링크 시스템 설계 및 구축 (The Design and Implementation of the Data Link System based on the Off-the-shelf Ultra Mobile Personal Computer for Network Centric Warfare(NCW))

  • 심동섭;김기형
    • 한국군사과학기술학회지
    • /
    • 제12권2호
    • /
    • pp.175-181
    • /
    • 2009
  • All of the military aircrafts in Korea Air Force are administered and operated together in the same system regardless of whether they are equipped with the data communication capability or not. The absence of the data communication capability in some of the aircrafts might increase whole kill chain hour at the point of the Network Centric Warfare achievement. Network synergy effects cannot also be desired if the section which is not connected to the network influences to the whole tactical network. Equipping aircrafts with the data communication capability could be done by upgrading the aircrafts, but resulting in high costs and long updating time. This paper is a research about the design and implementation of the UMPC based Data Link System to aircrafts that do not have the data communication capability. The proposed system grafts the UHF-based wireless modem technology and the aircraft flight mission support software onto the off-the-shelf UMPC and GPS system. The employed UHF radio equipment allows communicating tactic data with another aircrafts on the air, the ground control point, and even the Tactical Air Control Party(TACP) control vehicle that achieve missions with aircrafts. It thereby increases such capabilities as navigation aid, situation awareness, quick target identification and attack. We also applied Closed Air Support(CAS) scenarios, which is very close to the real environment, to the experiments of the proposed system. The experimental results show that the proposed system could support the data communication capability effectively and the flight mission at low costs of money and time.

SAN 기반 클러스터 파일 시스템 $SANique^{TM}$의 성능평가 및 분석 (Performance Analysis of Cluster File System $SANique^{TM}$ based on Storage Area Network)

  • 이규웅
    • 한국IT서비스학회지
    • /
    • 제7권1호
    • /
    • pp.195-204
    • /
    • 2008
  • As the dependency to network system and demands of efficient storage systems rapidly grows in every networking filed, the current trends initiated by explosive networked data grow due to the wide-spread of internet multimedia data and internet requires a paradigm shift from computing-centric to data-centric in storage systems. Furthermore, the new environment of file systems such as SAN(Storage Area Network) is adopted to the existing storage paradigm for providing high availability and efficient data access. We describe the design issues and system components of $SANique^{TM}$, which is the cluster file system based on SAN environment. We, especially, present the comparative results of performance analysis for the intensive I/O test by using the DBMSs that are operated at the top of cluster file system $SANique^{TM}$, EXT3 and NFS respectively.

Network-centric CAD

  • Lee, Jae-Yeol;Kim, Hyun;Lee, Joo-Haeng;Do, Nam-Chul;Kim, Hyung-Sun
    • 한국전자거래학회:학술대회논문집
    • /
    • 한국전자거래학회 2001년도 International Conference CALS/EC KOREA
    • /
    • pp.615-624
    • /
    • 2001
  • Internet technology opens up another domain for building future CAD/CAM environment. The environment will be global, network-centric, and spatially distributed. In this paper, we present a new approach to network-centric virtual prototyping (NetVP) in a distributed design environment. The presented approach combines the current virtual assembly modeling and analysis technique with distributed computing and communication technology fur supporting virtual prototyping activities over the network. This paper focuses on interoperability, shape representation, and geometric processing for distributed virtual prototyping. STEP standard and CORBA-based interfaces allow the bi-directional communication between the CAD model and virtual prototyping model, which makes it possible to solve the problems of interoperability, heterogeneity of platforms, and data sharing. STEP AP203 and AP214 are utilized as a means of transferring and sharing product models. In addition, Attributed Abstracted B-rep (AAB) is introduced as 3D shape abstraction for transparent and efficient transmission of 3D models and for the maintenance of naming consistency between CAD models and virtual prototyping models over the network.

  • PDF

Cross-layer Video Streaming Mechanism over Cognitive Radio Ad hoc Information Centric Networks

  • Han, Longzhe;Nguyen, Dinh Han;Kang, Seung-Seok;In, Hoh Peter
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권11호
    • /
    • pp.3775-3788
    • /
    • 2014
  • With the increasing number of the wireless and mobile networks, the way that people use the Internet has changed substantively. Wireless multimedia services, such as wireless video streaming, mobile video game, and mobile voice over IP, will become the main applications of the future wireless Internet. To accommodate the growing volume of wireless data traffic and multimedia services, cognitive radio (CR) and Information-Centric Network (ICN) have been proposed to maximize the utilization of wireless spectrum and improve the network performance. Although CR and ICN have high potential significance for the future wireless Internet, few studies have been conducted on collaborative operations of CR and ICN. Due to the lack of infrastructure support in multi-hop ad hoc CR networks, the problem is more challenging for video streaming services. In this paper, we propose a Cross-layer Video Streaming Mechanism (CLISM) for Cognitive Radio Ad Hoc Information Centric Networks (CRAH-ICNs). The CLISM included two distributed schemes which are designed for the forwarding nodes and receiving nodes in CRAH-ICNs. With the cross-layer approach, the CLISM is able to self-adapt the variation of the link conditions without the central network controller. Experimental results demonstrate that the proposed CLISM efficiently adjust video transmission policy under various network conditions.